Availability
Clearance
Mikuni low-speed jets are designed to be used in Super BN watercraft carburetors. The jets are made of brass and are available in different sizes. Order the Mikuni low-speed jets designed to fit your application needs.
Not Yet Reviewed
$14.99
$3.50
—
$14.99
Mikuni main jets are available in a wide range of sizes to accommodate your exhaust flow volume requirements. Standard tuning seldom needs more than small adjustments to accommodate a wide range of engine setups. One of the more common required changes is the main jet size. Install Mikuni main jets when you are ready to re-tune and get the most out of your engine.
( 1 )
$11.50
—
$29.99
These Mikuni needle jets are the primary fuel passage to the main bore of the Mikuni carburetor. The inside diameter of a specific needle jet will affect the function of the needle. Therefore, needle jets and needles act together as the main system in controlling the amount and mixture of your fuel. Mikuni needle jets are made from brass and are available not only in types, but series and sizes. Be sure to choose the Mikuni needle jets that best suit your needs.
Not Yet Reviewed
$4.99
—
$21.99
Highly developed engines use fuel more efficiently, but not if they're poorly tuned. Mikuni pilot jets are one piece of your tuning puzzle. Pilot jets are replaceable and the pilot air screw is adjustable. If the jet is too large or the air screw is in too far, then the air/fuel mixture may be too rich. That's one reason why Mikuni pilot jets come in different sizes. The brass pilot jets will deliver a precise amount of fuel so you can have your machine running perfectly. Don't waste time trying to do the impossible--replace your pilot jets and start having fun.
( 2 )
$8.50
—
$21.99
Clearance
Convert your carburetors to power jet carburetors with Mikuni power jet kits. Their brass power jets deliver fuel at high rpm, allowing for a reduction in the main jet of about 25 percent. They yield a better midrange setting and fuel-air mixture at the top-end for more power and improved fuel economy. Mikuni TM carburetors accept power jet kits. Prevent leaning out during extended full-throttle runs with Mikuni power jet kits.
Not Yet Reviewed
$35.99
$15.50
When your carburetor needs to be tuned, you need to look at all facets of its working components. Mikuni air jets meter the airflow through the carburetor passage and into the needle jet. They act as fine-tuning components in regulating the fuel to air mixture. Additionally, the proper working of your Mikuni air jets is especially important when a bleed-type needle jet is utilized. Mikuni air jets are made of brass and come in different sizes to help get your machine running like a top.
Not Yet Reviewed
$6.99
—
$9.99
When you are rebuilding your carburetor, use Mikuni direct replacement parts as your foundation. Mikuni main jet rings are made of brass and are the replacement pieces that will keep your carburetor running like new. When you are ready for a rebuild, do it with Mikuni main jet rings.
Not Yet Reviewed
$9.99
—
$16.99
When you are rebuilding your carburetor, use Mikuni direct replacement parts as your foundation. These plastic Mikuni main jet plug washers are the replacement pieces that will keep your carburetor running like new. When you are ready for a rebuild, do it with Mikuni main jet plug washers.
Not Yet Reviewed
$2.99
Mikuni needle jet setter O-rings are manufactured from Buna rubber and are the replacement pieces that will keep your carburetor running like new. When you are ready for a rebuild, do it with Mikuni needle jet setter O-rings.
Not Yet Reviewed
$26.99
When you are rebuilding your carburetor, use Mikuni direct replacement parts as your foundation. These aluminum Mikuni main jet plugs are the replacement pieces that will keep your carburetor running like new. When you are ready for a rebuild, do it with Mikuni main jet plugs.
Not Yet Reviewed
$10.99
When you are rebuilding your carburetor, use Mikuni direct replacement parts as your foundation. Mikuni needle jet setters are the replacement pieces that will keep your carburetor running like new. When you are ready for a rebuild, do it with Mikuni needle jet setters.
Not Yet Reviewed
$3.99
Mikuni 8 Series carburetor needles are high-precision and calibrated for an extremely accurate fuel flow rate. Designed to suit the Mikuni HSR Carbs, these jet needles are also suitable for Harley-Davidson® and other motorcycle applications. The jet needles are the tapered rods that are positioned in the throttle valve by the 'E'-Clip. The taper of the needle increases the clearance between the jet needle and the fixed needle jet outlet as the throttle is opened. As the air flow volume increases past the throttle slide, the fuel volume is also increased to maintain the correct air/fuel ratio. The Mikuni 8 Series jet needles are manufactured from brass to offer long and reliable service to help improve the performance of your motorcycle or ATV, keeping your ride running in peak condition.
Not Yet Reviewed
$17.99
—
$21.99
Mikuni 159 Series carburetor needles are high-precision and calibrated for an extremely accurate fuel flow rate. They're manufactured from brass for a long and reliable life. Mikuni 159 Series jet needles can help to improve the performance of your powersports machine. Order the needle designed for your carb model.
Not Yet Reviewed
$21.99
Mikuni VM series carburetors are the most popular high performance single carburetors in the sport of motorcycling. These time and track-tested carburetors have proven themselves on all terrains and in all conditions. They boast a large selection of bore sizes for an increased fuel mixture flow to match your engine modifications. The Mikuni VM series carburetors also offer you a plethora of tuning components to allow for precise fuel mixture metering for any application. It's time to go with a winner--install Mikuni VM series carburetors on your bikes and leave the world behind you.
( 34 )
$156.99
It's your turn to lead the pack! Mikuni Super BN series carburetors are specially designed to meet the needs of high-horsepower racing watercraft. Mikuni helps you achieve maximum performance with improved air and fuel flow. Their extensive testing and exclusive design improvements will take your watercraft to the next level. When it's time to be the best of the best, it's time for Mikuni Super BN series carburetors.
( 12 )
$268.99
—
$308.99
Clearance
These Mikuni 5 Series carburetor needles are high-precision and calibrated for an extremely accurate fuel flow rate. They are manufactured from brass for a long and reliable life. Mikuni 5 Series needles can help to improve the performance of your motorcycle or ATV, keeping your ride running in peak condition.
Not Yet Reviewed
$10.99
$6.50
—
$13.99
These Mikuni 6 Series carburetor needles are high-precision and calibrated for an extremely accurate fuel flow rate. They are manufactured from brass for a long and reliable life. Mikuni 6 Series needles can help to improve the performance of your motorcycle or ATV, keeping your ride running in peak condition.
( 2 )
$10.99
—
$17.99
Mikuni offers an ideal selection of replacement carburetor components. Large or small, the parts are available for fitment on a variety of Mikuni carb models—such as Super BN38mm, BN381, BN401, BN44, and BN46. A faulty carburetor can leave your car sitting in the garage. Order the components needed for maintenance or rebuild.
( 1 )
$9.99
These Mikuni 7 Series carburetor needles are high-precision and calibrated for an extremely accurate fuel flow rate. They are manufactured from brass for a long and reliable life. Mikuni 7 Series needles can help to improve the performance of your motorcycle or ATV, keeping your ride running in peak condition.
Not Yet Reviewed
$13.99
Mikuni TM series carburetors utilize a flat valve design to produce significant performance improvements over the dated design of the round slide carburetors. The air flows faster and smoother through the TM series venturi due to the flat slide configuration and the jet blocks. This unique combination helps to create a smoothbore effect. The characteristics of these carburetors produce high airflow and stronger vacuum at the needle jet to offer precise metering and better throttle response. It's time to be a winner--install Mikuni TM series carburetors on your ride!
( 8 )
$150.99
—
$382.99
Mikuni HSR-48 carburetor race kits are designed for the serious race engine builder and extreme street motor enthusiast looking for more power. They're recommended for 120 cu. in. engines or bigger with high-flow heads and cams—or if your heads have been flowed to require a 270 cfm flow rate. These kits include a 48mm smooth bore carb, rubber mounting flange (78mm bolt hole centers), choke cable, and four main jets. (Builder supplies manifold and appropriate air filter or velocity stack.) Uses stock Harley-Davidson© CV-type cables.
Not Yet Reviewed
$555.99
Mikuni HSR Easy Kits offer bolt-on performance with pre-jetted and ready-to-run carburetors. These uniquely designed kits utilize your stock throttle cables for a quick install, and to retain your motorcycle's original appearance. The HSR flatslide carburetors deliver excellent throttle response and control. The smoothbore allows the engine to reach its full power potential, so you accelerate and pass with confidence. You'll get good gas mileage and many years of dependable, carefree performance. Mikuni HSR Easy Kits are designed to work with your original Harley-Davidson® intake manifold, choke cable, air cleaner, and throttle cables. You can run other high performance air filters designed for the CV-type carburetors by using the special adapter included in the kits.
( 6 )
$416.99
—
$484.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
