Availability
Holley gasoline carburetor jet assortment kits are the professional way to track-tune your Holley carburetor for top performance. They consist of two each in different jet sizes. The jets are contained in either a plastic case or aluminum plate that are designed to keep them separated and make them easily accessible.
( 106 )
$96.05
Holley electronic fuel injectors deliver the performance and quality that you expect when you see the Holley name. They're available either as replacement items to take the place of failed or damaged parts, or as upgrade and tuning items to boost fuel flow when you're cranking up the power in your engine. Many different options are available, including more than a dozen lbs./hr. advertised flow rates. Select the model best suited for your application.
( 43 )
$599.95
Holley Sniper fuel injectors feature a precision lapped disc valve, high-quality brass windings, and high-temperature O-rings to provide excellent linearity with no discernible "bounce" at low-pulse widths. Features include: * PICO/EV6-style performance injectors * High-impedance (12.2 ohms) for use with saturated drivers * Rated injector flow: 36 lbs./hr. at 43 psi * Supports up to 575 hp * Tri-cone spray pattern
( 1 )
$649.95
Holley accelerator pump tuning kits are composed of a selection of accelerator pump hardware components, including pump diaphragms, pump nozzles, pump cams, and related parts. Contained in a convenient plastic parts case, these kits have all that is required to properly tune and calibrate the accelerator pump circuit(s) for your street, drag, Circle Track car, or tow vehicle. A handy parts guide is affixed to the inside case cover to assist in reordering components when necessary.
( 18 )
$227.95
Holley air bleed assortment kits are a must when track-tuning a 4500 Dominator HP carb for maximum performance. They include four of each air bleed size from 23 to 79, and feature 10-32 UNF threads.
( 6 )
$349.95
Holley Sniper EFI fuel injectors provide excellent linearity with no discernible "bounce" at low pulse widths, as commonly found in other injectors. They feature a precision-lapped disc valve, high-quality brass windings, and high-temperature O-rings. Order a set of eight Holley Sniper EFI performance fuel injectors for use with your Holley EFI intake manifold. Features: * PICO/EV6-style performance injectors * High impedance (12.2 ohms) for use with saturated drivers * Rated injector flow: 36 lbs./hr. at 43 psi * Supports up to 575 hp (maximum) * Tri-cone spray pattern * Not intended as service injectors for Sniper EFI TBI product line
( 1 )
$86.95
These Holley replacement fuel injector wiring harnesses are replacements for the 8-cylinder injector harnesses. They connect the main harness to the injectors, routing the wires over the rail and making replacement a snap!
( 14 )
$149.95
Holley carburetor tuning/calibration kits contain a selection of main jets, pump nozzles, and power valves in popular sizes, all contained in a handy and durable compartmentalized plastic case. Ideal for trackside tuning, these kits provide a quick and easy way to accomplish your carburetor tuning with the correct parts. In addition, the parts case allows you to keep parts organized and readily at hand. A handy parts guide is affixed to the inside case cover. Numbers referenced on the parts guide will assist you in reordering components when necessary. Gaskets are included to facilitate carburetor re-assembly.
( 10 )
$182.95
Holley alcohol carburetor jet assortment kits are the professional way to track-tune your Holley carburetor for top performance. They consist of four each of 24 standard length jets, ranging from size 132 to 200. The jets are contained in a plastic case that is designed to keep them separated and make them easily accessible.
( 6 )
$178.95
On Sale
Holley drop-in fuel module assemblies cover a wide range of vehicles and performance expectations—including dual pump designs. These replacement assemblies meet the highest-quality standards offered for increased performance and fuel efficiency. Holley drop-in fuel modules are capable of supporting 550-plus horsepower right out of the box! Dozens of models are available, with flow rate options between 50 and 277 gph. Order the fuel module recommended for your vehicle. Features may include: * Plug-and-play wiring harnesses * Integrated fuel storage and filtration technology * Built-in, pre-calibrated fuel level sensors * HydraMat filter (keeps fuel available at the pick-up during radical maneuvers and provides contamination protection) * Most models include sending unit
( 8 )
$449.95
Racers sometimes prefer to race their cars without using a power valve. In these cases, the only way to properly block off the power valve circuit is with one of these Holley power valve plugs and gaskets. They'll fit any Holley carburetor with 1/2 in. x 28 threads, and block the circuit for all-out race performance!
( 6 )
$10.13
Holley carburetor renew kits are original equipment rebuild kits and are available for all Holley marine carburetors as well as Carter and Rochester. Each kit contains all parts and gaskets that are necessary to restore like-new performance to your marine carburetor. Detailed instructions are also included to guide you through the rebuilding process. Start off the season with one of these quality Holley Renew marine repair kits--it's your guarantee for trouble-free cruising!
( 118 )
$52.09
Holley emulsion bleed kits are designed to fine tuning of your Holley HP Series 390 cfm 4-barrel carburetor. They include a plastic case with labeled compartments for easy identification. The emulsion bleed kits include the following sizes: * 10 blank emulsion jets to drill your own size * 10 emulsion jets size 0.020 in. * 10 emulsion jets size 0.031 in. * 10 emulsion jets size 0.040 in. * 10 emulsion jets size 0.046 in. * 10 emulsion jets size 0.052 in.
( 1 )
$199.95
Replace your worn or missing throttle studs with the Holley recommended carburetor throttle lever studs.
( 101 )
$31.18
On Sale
Keep your carb precisely tuned for efficient performance. Holley air bleed kits are designed to fine-tune your carburetor's intermediate and high-speed circuits. They are made from high-quality brass.
( 14 )
$28.03
Holley emulsion jets are just what you need to fine-tune your carburetor for street or race. Threaded for easy installation and removal, Holley jets are manufactured to high tolerances for consistency.
Not Yet Reviewed
$18.20
Holley has been the undisputed leader in fuel systems for over 100 years. Holley carburetor metering block gaskets are available for a variety of Holley carburetors with and without intermediate systems. These gaskets ensure a good, leak-free seal between your carburetor body and metering blocks. Holley can give you the edge you need over the competition!
( 26 )
$22.39
The all new Aluminum Street HP's weigh up to 40% less and are even easier on your wallet. Holley is proud to introduce the all new Aluminum Street HP™. They utilize the best features from Holley's Race Bred 4150 HP™ carbs, but are tamed for street and light competition use. The Street HP features an aluminum contoured main body design taken from the race winning 4150 HP™ and has a tumble polished shiny finish and screw in air bleeds for precision tuning capabilities. The metering system includes a timed spark port for a vacuum advance distributor and is calibrated for a hot street/strip engine setup for outstanding throttle response, drivability and maximum performance. A street HP base plate is used so there are plenty of vacuum ports for power brakes, PCV, etc. The Aluminum Street HP takes all the great features from the race bred HP and the Double Pumper and combines them into the perfect street/strip carburetor.
( 37 )
$799.95
Holley's Ultra XP carburetors are up to 38 percent lighter than their traditional carbs, offer 20 percent greater fuel capacity, and include a host of other features. One of the main perks is an integrated idle bypass valve that allows for idle adjustments while maintaining the proper throttle-plate-to-transfer-slot relationship. You'll also get all-aluminum construction, fully tunable billet metering blocks, billet base plate, adjustable secondary linkage, and knurled (hand-adjustable) curb idle screws. Enjoy the ultimate in square-bore race carbs; order the Ultra XP carburetor with options best suited for your race application! Some of the many other features include: * Your choice of several finishes and CFM ratings (from 600 to 950) * Contoured Venturi inlet offers balanced airflow for increased hp * Dual accelerator pumps provide the perfect amount of fuel, from idle to full-throttle * Clear sight windows on both sides of bowls for safe and easy fuel level adjustments * -8 AN (O-ringed) inlet threads offer a large variety of plumbing options from either side * Mechanical secondaries for perfect off-the-line launches * 100-percent wet-flow tested by Holley technicians
( 43 )
$1,249.95
—
$1,299.95
On Sale
Want to upgrade your street carburetor to a high performance race carb, but don't have the means to do a complete carb swap? If you can turn a screwdriver, you can get 25 to 50 hp from these Holley carburetor main bodies. With no air horn, choke tower, or choke control to restrict airflow, they deliver extra power easily and affordably. These main bodies are available in a standard dichromate or shiny finish.
( 75 )
$349.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
