Availability
On Sale
Aeromotive 12-Series mechanical pump outlet port adapter fittings are designed for operational use on the 12-Series fuel pump outlet (pressure) port. These black anodized aluminum bolt-on kits provide ORB -08 to AN -08, ORB -12 to AN -12, or ORB -12 to AN -10 outlet port adapter connections, depending on application. Aeromotive 12-Series mechanical pump outlet port adapter kits get your high-flow 12-Series fuel pump properly connected to the rest of your fuel line. Order the kit designed to fit your application. Features, items, and specs may include: * High-flow capacity * O-rings and stainless steel fasteners * Suitable for hex or belt-driven pumps * Supports high-pressure fuel line and hose ends * ORB -08 to AN -08 versions support mechanical injection applications requiring AN -08 supply line to barrel valve
Not Yet Reviewed
$50.90
$45.81
On Sale
Aeromotive 12-Series mechanical pump inlet port adapter fittings are designed for operational use on the 12-Series fuel pump inlet (suction) port. These black anodized aluminum bolt-on kits provide either AN -16 male flare, or 1.250 in. barb inlet port adapter connections, depending on application. Aeromotive 12-Series mechanical pump inlet port adapter kits get your high-flow 12-Series fuel pump properly connected to the rest of your fuel line. Order the kit designed to fit your application. Features, items, and specs may include: * High-flow capacity * O-rings and stainless steel fasteners * Suitable for hex or belt-driven pumps * Supports 1 1/4 in. hose or hard tubing inlet (1.250 in. barb inlet port adapter only) * Requires bib hose and clamps with tubing (1.250 in. barb inlet port adapter only)
Not Yet Reviewed
$50.90
$45.81
On Sale
Ensure clean fuel flow with Aeromotive's VaporWorx fuel filters. Keeping the injectors clean is vitally important in order for them to function properly. On traditional EFI systems there is a pre-filter just before the inlet to the fuel pump. These filters are used to catch the larger contaminates and protect the fuel pump from damage. VaporWorx filters strain contaminates from the fuel before it reaches the pump and fuel injectors. These filters include two threaded fittings for easy installation into aftermarket EFI fuel plumbing.
Not Yet Reviewed
$47.70
$42.93
On Sale
Aeromotive VaporWorx corner pickup kits provide the ultimate in low fuel level performance for Gen5 Camaro, CTS-V2, and C7 fuel modules. They will also work with other fuel modules that have a suction port/in-tank crossover line connection usually located on the lower reservoir. Kits include: * Two genuine Walbro vented pickups * In-tank rated flexi-hoses * Stainless steel full-contact clamps * 45-degree 3/8 in. x 5/16 in. quick connector fitting * Y, T, and in-line connector fittings * Three 15 in. hoses * One 8 in. hose Note: Suction pump connection needed. Not for use on standalone pumps.
Not Yet Reviewed
$190.95
$171.86
On Sale
The Camaro Stealth Fuel System includes the Aeromotive Stealth A1000 fuel pump, designed to fit inside the stock, OEM Camaro tank and integrate with the stock fuel-level sending unit and jet-siphon transfer pump. This serious Aeromotive fuel system provides all the necessary fuel system hard-parts, including the Stealth in-tank fuel pump, 40-micron high-flow filter, one-piece CNC Y-block, billet high-flow fuel rails, billet EFI pressure regulator, and all necessary Aeromotive high-flow, ORB port fittings. Fuel pump electrical supply is also provided, including fuel pump speed controller, designed to keep fuel cool in cars that will see extended street driving but still need full pump performance for all-out racing. (Fuel lines and hose-ends sold separately. The purchase of a separate tach adapter may be required to operate the fuel pump speed controller.) Additional details: * Rated for EFI engines producing up to 1,000 flywheel horsepower forced induction or 1,300 flywheel horsepower naturally aspirated * For 2010-15 Camaros equipped with LS3 engine and/or equivalent intake * Includes Aeromotive's fuel pump speed controller for continuous duty street/strip applications * This product is not legal for sale or use on emission-controlled vehicles except when used as a direct replacement part matching OEM specifications * This kit contains the following parts: -- (1) Fuel rail -- (1) Fuel pressure regulator -- (1) Fuel pump assembly -- (1) Fuel pump speed controller -- (1) Filter bracket -- (1) Filter assembly, 40-micron -- (1) One-way check valve -- (6) ORB-08 to AN-08 fittings -- (4) ORB-10 to AN-08 fittings -- (1) ORB-06 to AN-08 fitting -- (1) Y-Block, AN-08 -- (1) AN-10 O-ring
Not Yet Reviewed
$3,100.75
$2,790.68
On Sale
Aeromotive fuel tank rollover valves are CNC-machined from 6061 T-6 aluminum for a precision fit and are anodized Type II bright dip black for corrosion protection and great looks. These fuel tank vent valves offer protection should the unthinkable happen. Stay safe with Aeromotive rollover valves; choose the proper size needed.
( 1 )
$44.55
$40.10
On Sale
Fluids used in automobiles work to keep your vehicle running while adversely affecting the seals designed to contain them. Whether you're adapting fuel logs for new carburetors or replacing worn O-rings, Aeromotive rebuild kits have the components you'll need. Designed for specific kits (see the "Notes" section of the product "Overview"), Aeromotive Fuel Log Rebuild Kits provide the O-rings and parts necessary to stop leaks and bring your motor back to life!
Not Yet Reviewed
$79.00
$71.10
On Sale
A4 carbureted fuel pressure regulators from Aeromotive use a "soft-seat" design, eliminating pressure creep at idle and on the throttle stop. This exclusive design ensures precise pressure control, resulting in more consistent ETs.
( 1 )
$594.65
$535.18
On Sale
Aeromotive 1988-97 Chevy Truck Dual 340 in-tank fuel pump modules are direct drop-in units for the specified years of GM 1500/2500 V8 trucks. Featuring dual 340 lph pumps, they can support up to 1,400 FWHP on gas/fuel injection/forced induction and up to 980 FWHP on E-85/fuel injection/forced induction. 100 micron pump pre-filters are included. Additional features: * No drilling required for installation * Individual wiring terminals for each pump to accommodate a staged system * Single -08 ORB outlet port for easy plumbing * Outlet, return, and vent ports include -08 90-degree swivel fittings * Vent port adapter fitting * 0-90 Ohm fuel level sender
( 1 )
$725.70
$653.13
On Sale
Aeromotive belt pump ultra high-flow adjustable EFI regulators are designed for use with EFI belt-driven fuel pumps developing over 200 gph. They feature two CNC-machined stainless steel vacuum/boost fittings and a classic Aeromotive Type II bright dip anodized finish on the body and cap.
( 3 )
$424.35
$381.92
On Sale
Aeromotive A1000 Stealth fuel cells feature a built-in Aeromotive A1000 fuel pump and a 100 micron stainless steel prefilter. They can be mounted anywhere in any car. Simply strap one of the fuel cells in, hook up your fuel line to the pump outlet and your two wires, and you're done. You won't have to search any longer for a place to mount your fuel pump and pre-pump filter. Through an innovative baffling system inside of the cells, the fuel pump inlet always has a constant column of fuel. In addition, the Aeromotive A1000 Stealth fuel cells' baffling keeps fuel at that same point, even during extreme driving conditions, making them perfect for off-road vehicles, drag racing, and even autocross and drifting. Plus, the pump is inside of the cells, so noise is drastically reduced, and the fuel pump runs cooler longer, ensuring longevity and drivability. Additional features include: * Available in 15 or 20 gallon capacity * All-aluminum construction * TIG-welded * Flush mount lid assembly * Two -8 AN rollover valves * Universal 0-90 ohm built-in fuel level sending unit * -8 AN return fitting for bypass line from the fuel pressure regulator
( 6 )
$1,293.85
—
$1,439.20
$1,164.46
—
$1,295.28
On Sale
Aeromotive's Pro-Series Boost Reference EFI regulators are designed to deliver enough flow to support a whopping 2,000 hp! They're perfect if your application requires one or even two Pro-Series pumps. The Aeromotive Boost Pro-Series regulators feature two CNC-machined stainless steel fittings so that you can reference boost, and they have extra ports available for pressure gauges and transducers. These regulators include Aeromotive's exclusive AN cutoff tapered flare fittings, O-rings, and port plugs.
( 4 )
$302.35
—
$479.55
$272.12
—
$431.60
On Sale
Aeromotive offers various brushless Eliminator fuel cells, featuring the pump and a 100-micron prefilter which can be mounted anywhere in any vehicle. Simply strap the fuel cell in, hook up your fuel line to the pump outlet and your two wires, and get ready to drive! Through an innovative interior baffling system, the inlet carries a constant column of fuel, keeping it at that same point, even during extreme driving conditions. This quality makes them perfect for off-road vehicles, drag racing, autocross, drifting, and more! Additional features include: * Available in 6, 15, or 20-gallon capacities * In-cell pump reduces noise and prolongs cooler running for longevity and drivability * All-aluminum construction * TIG-welded * Flush-mount lid assembly * (2) -8 AN rollover valves * Universal 0 to 90-ohm built-in fuel level sending unit * Return fitting (-8 AN) for bypass line from the fuel pressure regulator * Brushless pump allows for higher pressure with minimal drop in flow
Not Yet Reviewed
$2,499.15
—
$2,665.75
$2,249.24
—
$2,399.18
On Sale
Looking for remote mounting brackets for modern 3-wire Bosch sensors used in GM LS engines? Aeromotive VaporWorx MAP sensor mounting bracket/blocks can be your solution. Compact and rugged, these kits come with everything needed to remote mount your sensor, including the electrical plug and components. They are ideal for mounting the Bosch-style 3-wire MAP sensor and for dynamometer operators looking for a simple to use and adapt system. Features and contents: * 6061 Type III hard coat anodized aluminum * 3-pin plug, terminals, and seals * Brass barb fitting for 1/8 in. hose x 1/8 in. NPT thread * Sufficient clearance to use larger hoses or AN fittings for vacuum line * MAP sensor hold-down screw * Stainless steel mounting screws * Four feet of vacuum hose
( 1 )
$64.70
$58.23
On Sale
Aeromotive offers various brushless A1000 fuel cells, featuring the pump and a 100-micron prefilter which can be mounted anywhere in any vehicle. Simply strap one of the fuel cells in, hook up your fuel line to the pump outlet and your two wires, and get ready to drive! Through an innovative interior baffling system, the inlet carries a constant column of fuel, keeping it at that same point, even during extreme driving conditions. This quality makes them perfect for off-road vehicles, drag racing, autocross, drifting, and more! Additional features include: * Available in 6, 15, or 20-gallon capacities * In-cell pump reduces noise and prolongs cooler running for longevity and drivability * All-aluminum construction * TIG-welded * Flush-mount lid assembly * (2) -8 AN rollover valves * Universal 0 to 90-ohm built-in fuel level sending unit * Return fitting (-8 AN) for bypass line from the fuel pressure regulator * Brushless pump allows for higher pressure with minimal drop in flow
( 1 )
$2,152.75
—
$2,431.80
$1,937.48
—
$2,188.62
On Sale
Aeromotive Eliminator Stealth fuel cells feature their built-in Eliminator electric fuel pump and a 100 micron stainless steel prefilter. They can be mounted anywhere in any car. Simply strap one of the fuel cells in, hook up your fuel line to the pump outlet and your two wires, and you're done. You won't have to search any longer for a place to mount your fuel pump and pre-pump filter. Through an innovative baffling system inside of the cells, the fuel pump inlet always has a constant column of fuel. In addition, the Aeromotive Eliminator Stealth fuel cells' baffling keeps fuel at that same point, even during extreme driving conditions, making them perfect for off-road vehicles, drag racing, and even autocross and drifting. Plus, the pump is inside of the cells, so noise is drastically reduced, and the fuel pump runs cooler longer, ensuring longevity and drivability. Additional features include: * Available in 15 or 20 gallon capacity * All-aluminum construction * TIG-welded * Flush mount lid assembly * Two -8 AN rollover valves * Universal 0-90 ohm built-in fuel level sending unit * -8 AN return fitting for bypass line from the fuel pressure regulator
( 1 )
$1,405.25
—
$1,573.45
$1,264.72
—
$1,416.10
On Sale
It's hard to find inline fuel pumps that are more powerful and higher flowing than the Aeromotive Pro Series. Engineered for high-horsepower racing engines, these awesome pumps feature the Aeromotive dual-chamber pump design. Additional features include: * Beautifully plated with Aeromotive electroless nickel process * -12 AN O-ring boss inlet port and -12 AN O-ring boss outlet port; adapter fittings included * Fully submersible for custom in-tank pump placement * Supports naturally aspirated EFI engines up to 2,200 hp * Supports forced air induction EFI engines up to 1,700 hp * Supports naturally aspirated carbureted engines up to 2,600 hp * Supports forced air induction carbureted engines up to 2,000 hp
Not Yet Reviewed
$1,093.85
$984.46
On Sale
Are you finding that the GM LT Series installation kit lacks some critical small parts to install the fuel system? VaporWorx is here to help. Aeromotive VaporWorx LT engine installation full kits provide exactly what you need to get the job done. Included: * Adapter fitting to convert the GM fuel module outlet to 6 AN * A 45-degree F-F swivel to start the turn to the side of the car * A 6 AN M-M union with an 1/8 in. NPT female thread on the side * Brass VaporWorx fuel pressure sensor adapter to attach the GM fuel pressure sensor. (M10 x 1mm O-ring thread to 1/8 in.-NPT male thread) * Genuine Delphi fuel module electrical plug kit
Not Yet Reviewed
$65.75
$59.18
On Sale
Aeromotive EFI OEM returnless rail Stealth fuel systems support the returnless fuel rails found in many early and late model cars and trucks. Includes: * Aeromotive's 3/8 in. quick-connect adapter for most OEM fuel rails * Port fittings (including fittings for Aeromotive Stealth and Phantom fuel pumps) * Aeromotive EFI regulator and fittings * -6 AN filter with 10 micron element * Aeromotive 0-100 psi equalizer liquid-filled fuel pressure gauge
( 1 )
$714.55
$643.10
On Sale
Aeromotive universal fuel system kits provide everything you need to completely install a fuel system on your street rod, muscle car, or Pro Street vehicle. Universal kits are ideal if a system for your specific application does not yet exist, or you already have a sumped tank or fuel cell. Kit components include the appropriate EFI or carbureted fuel pump, a billet fuel pressure regulator, two billet fuel filters, braided lines, hose ends, fittings, wiring, a relay, and all additional hardware to install the systems on virtually any car. These systems support a wide range of performance, from 250 to over 2,000 hp, for both fuel injected and carbureted applications. Whether you have a street car, race car, or hot boat, Aeromotive's universal fuel systems are an excellent choice.
( 1 )
$1,394.65
$1,255.18
On Sale
Aeromotive offers various brushless 5.0 gpm gear pump fuel cells, featuring the pump and a 100-micron prefilter which can be mounted anywhere in any vehicle. Simply strap one of the fuel cells in, hook up your fuel line to the pump outlet and your two wires, and get ready to drive! Through an innovative interior baffling system, the inlet carries a constant column of fuel, keeping it at that same point, even during extreme driving conditions. This quality makes them perfect for off-road vehicles, drag racing, autocross, drifting, and more! Additional features include: * Available in 6, 15, or 20-gallon capacities * In-cell pump reduces noise and prolongs cooler running for longevity and drivability * All-aluminum construction * TIG-welded * Flush-mount lid assembly * (2) -8 AN rollover valves * Universal 0 to 90-ohm built-in fuel level sending unit * Return fitting (-8 AN) for bypass line from the fuel pressure regulator * Brushless pump allows for higher pressure with minimal drop in flow
( 2 )
$2,855.10
—
$3,011.10
$2,569.59
—
$2,709.99
On Sale
For big-time fuel flow for your high-horsepower engine, use the Aeromotive billet hex drive fuel pumps. They feature an adjustable collar and Enderle bolt pattern that allows the hex-drive pump to be mounted to the back of a dry sump pump with the appropriate adapter—or connected direct-drive from the camshaft through a timing cover adapter, as seen on Sprint cars. Engineered with proprietary materials, the mechanical pumps can handle gasoline or alcohol, and make enough volume at cranking speed to develop fuel pressure to start EFI applications like no other pump. Other features include: * Support from 350 to over 2,500 hp, flowing in excess of 2,700 lbs./hr. at 100 psi * Work equally well in low and high-pressure systems, capable of pressures from 2-200 psi * Require bypass regulator * Billet aluminum, CNC-machined body * -10 AN ORB inlet and outlet ports * Equipped with a standard 3/8 in. hex driveshaft * Require AN ORB adapter fittings, sold separately
( 1 )
$1,104.45
$994.00
On Sale
Aeromotive EFI throttle body Stealth fuel systems have the parts and fittings to get fuel from the Stealth/Phantom pump up to the EFI unit. These kits feature a svelte X1 EFI regulator with larger -8 AN fittings and 1/3 less weight than the original, a 10 micron filter with -6 AN fittings, and a liquid-filled pressure gauge for accurate readings. Fuel lines are not included. Aeromotive EFI throttle body Stealth fuel systems will keep your new EFI purring.
Not Yet Reviewed
$658.30
$592.47
On Sale
Aeromotive Stealth in-tank pre-filters protect the heart of your fuel system: the pump. Your high performance pump needs clean fuel and lots of it. These Stealth pre-filters deliver high-flow efficiency, while sifting out contaminants and particles—and with minimal additional weight. Their 100-micron stainless steel elements fit inside the tank and feature a unique bulkhead fitting. This fitting replaces the stock fuel cell outlet bulkhead and offers support for the filter on the inside, while providing the high-flow connection needed to feed the pump on the outside. You can now filter your fuel without restricting the flow, and without using one square inch of the precious space you need to fit your pump low and close to the fuel cell.
( 2 )
$140.00
$126.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
