Free Shipping on Orders Over $109 at Summit Racing

Vintage Air Gen-V SureFit Systems Complete Kits

Vintage Air Gen-V SureFit Systems complete kits are powerful and intelligent climate control systems. Available for vehicles with or without factory air, they use an exclusive fully electronic microprocessor control system that eliminates cables or vacuum connections. Separate high-capacity copper parallel-flow heat coil and aluminum plate-and-fin cooling coils provide outstanding performance and instant temperature adjustments. Vintage Air Gen-V SureFit Systems feature variable blower speed and dash/floor/defrost blend. They will include everything in an evaporator kit, plus all underhood components, such as compressor, engine brackets, condenser with brackets, preformed refrigerant lines, drier, fittings, hardware, and installation instructions. Additional features and benefits: * Engineered to cool your vehicle faster than ever * Improved diagnostics and advanced systematic fail safes * Multiple mounting options for an easier installation * Rubber well-nut mounting points for improved NVH isolation * Separate high-capacity A/C and heater coils with blend air door for rapid vent temperature adjustment * OEM block-type expansion valve * Injection-molded case for optimal precision, strength, and quality * Injection-molded blend air doors with integral rubber seals * Removable access covers for coil service * Interchangeable defrost and floor heat plenums for increased mounting flexibility * Powdercoated steel mounting brackets * Quiet high performance blower * Bolt-in replacement control panel

4.63 out of 5 stars ( 8 )

$2,276.99

—

$2,858.99

EPAS Performance Electric Power Steering Kits

EPAS Performance electric power steering kits provide modern power steering for your classic car. These performance systems are available to outfit a wide range of vintage and classic vehicles from 1920-1980. An easy step-by-step installation manual is available online for each of the kits that EPAS offers. There is no major or irreversible modifications made to your vehicle, as everything is located under your dash and is almost, if not completely, invisible. How the systems work: The computer measures the amount of effort on the steering wheel and amplifies it with the aid of the electric motor. A potentiometer allows you to have more or less assistance, so you can adjust the amount of power assist. For example, you can have maximum power assist while on a parking lot, and less on the highway. Select the EPAS Performance electric power steering kit for your application needs. EPAS Performance electric power steering kits include: * Electric motor unit * Mounting hardware * Prewired control module * Some kits may also be available with steering columns

3.83 out of 5 stars ( 23 )

$1,735.99

—

$1,930.99

Double-Sided Personalized Speed Shop Sign

Make a lasting impression with the local hotrodders when you hang this double-sided speed shop sign outside your garage. Personalize it with your name (up to 10 characters) and location (up to 12 characters), then mount it somewhere prominent with the included wall bracket. Made from 24-gauge steel, the sign measures 28 in. x 22 in. overall with bracket. Please allow 2 to 3 weeks for personalization.

4.76 out of 5 stars ( 41 )

$124.99

Eddie Motorsports Billet Hood Hinges

Eddie Motorsports billet hood hinges are CNC-machined to perfection from high-quality 6061 T-6 billet aluminum. They provide a stunning alternative to your vehicle's unsightly stock stamped steel hinges and springs. These hinges are enhanced by the included nitrogen-filled gas struts and sealed bearings. Eddie Motorsports billet replacements give your hood outstanding stability and flawless operation that is simply not possible with 40- or 50-year-old stock hinges. The gas struts are made of the highest quality stainless steel for years of uncompromised performance. The struts are available in varying strengths to accommodate all types of hoods--including steel, fiberglass, and carbon fiber.

4.25 out of 5 stars ( 136 )

$589.95

—

$820.95

Fuel Off-Road Grin FF109 Gloss Black Wheels with Milled Accents

Fuel Off-Road Grin FF109 gloss black wheels feature a mesh-like face with multiple branching split-spokes that contain intricate milling to add depth to the design. The face sits deep within the lip of the wheel to emphasize the aggressive stance and offset. Deep lips and large diameters are what Fuel Off-Road specializes in, and the FF109 Grin puts those features on display. These one-piece forged monoblock aluminum wheels are available in a wide range of widths, diameters, bolt patterns, and other fitment options.

Not Yet Reviewed

$1,124.99

COMP Cams Custom Ground Camshaft Cores

Design your perfect cam with these custom cores from COMP Cams. There is a large number of custom ground cam cores available for most any engine application, depending upon the type of cam being ground. This gives you the freedom to choose the core, lobe design, and lobe separation angle that best suit your needs. The possibilities are endless with COMP Cams!

5.0 out of 5 stars ( 3 )

$344.99

—

$735.99

BendPak HD-9XW Standard Width Extra-Tall Lifts

The space saving design of the 9,000 lb. capacity BendPak HD-9XW is ideal for vehicle storage in residential garages or commercial buildings. It also happens to make a great service lift for smaller shops who still want to do a big business. These lifts are about the size of a typical parking space, helping to maximize floor space. The BendPak HD-9XW is great for storing ATVs, snowmobiles, jet skis, golf carts, boats or just about anything else that needs to be off the ground. You can finally make use of that wasted vertical space above your car. Additional features include the following: * 9,000 lbs. maximum lifting capacity * Freestanding design * Runways accommodate narrow and standard vehicles * Electric / hydraulic power system * Single hydraulic cylinder mounted underneath runway * Fully enclosed lifting cables, safety locks and sheaves * Internal anti-sway slider blocks in each column * Oversized self-lubricating cable rollers * Features heavy-duty 3/8 in. aircraft cable * Rugged 1 1/4 in. roller axles * Multi-position safety locks in each column * Adjustable lock ladders * Runways feature non-skid surface * Push-button pneumatic safety release * Independent backup slack-cable safety latches * Removable approach ramps for additional drive-under clearance

4.86 out of 5 stars ( 14 )

$6,495.00

Personalized Speed Shop Sign

You've got the tools and you've got the talent, so claim your spot among hot rodding's legendary tuners with a little shameless self-promotion. Start by personalizing this 24 in. x 14 in. speed shop sign with your name (up to 10 characters) and location (up to 12 characters). Made from 24-gauge steel. Distressed graphics. Please allow 2-3 weeks for personalization.

4.86 out of 5 stars ( 14 )

$50.99

Vintage Air Trinary Switch Kits

Vintage Air trinary switch kits combine low- and high-pressure compressor clutch cut-off functions plus an electric fan engagement signal at 254 psi. The low pressure cut-off of these trinary switches is 30 psi and the high pressure cut-off is 406 psi. Vintage Air trinary switches are available for barb or beadlock crimps and are recommended for all electric fan installations. Get three functions in one with Vintage Air trinary switch kits.

4.91 out of 5 stars ( 22 )

$42.99

Vintage Air Standard Air Conditioning Hoses

Vintage Air standard air conditioning hose plumbs your ride. Their barrier refrigerant hose for HFC-134a and R-12 systems is sold by the foot, so you can order what you need, or extra if you like. Standard hose is available in three sizes for liquid, discharge, and suction applications to get you connected from condenser to drier to evaporator, compressor to condenser, and evaporator to compressor. For the right hose to cool your ride, choose Vintage Air standard air conditioning hose.

4.56 out of 5 stars ( 9 )

$0.75

Vintage Air E-Z Clip Air Conditioning Hose

Vintage Air E-Z Clip air conditioning hose is the cool way to plumb your ride! Offered in three sizes, this smaller diameter hose (compared to standard hose) allows for tighter turns and neater routing. E-Z Clip hose is lightweight but rugged and you can assemble, route, and crimp in your own garage. Fabricating a custom plumb job just got easier with Vintage Air E-Z Clip air conditioning hose.

4.5 out of 5 stars ( 6 )

$4.99

—

$6.99

Heidts 1964-70 Ford Mustang PRO-G Independent Rear Suspension Kits

Heidts Pro-G IRS suspension kits are designed to bring the superior ride and handling of independent rear suspension to your muscle car. Out-handle the competition and put all of that horsepower to the ground. Heidts Pro-G IRS suspension kits produce 1/2 degree of camber curve at 3/4 of bump, especially during very high cornering loads. Features include: * Cast iron Ford 9 in. center section mounted in an aluminum housing * 31-spline posi-traction hooked up to heavy-duty half shaft CV joint axle shafts * Tubular upper and lower control arms * Steel outer uprights * Top crossmember * Frame mounting brackets * Wilwood rear brake rotors and calipers * Billet aluminum single adjustable coilover shocks with silver powdercoated springs

Not Yet Reviewed

$14,973.00

Diamond Pistons Small Block Chevy Nitrous Series Pistons

Diamond Pistons offers small block Chevy Nitrous Series pistons for a wide range of engine and cylinder head applications from the late 1960s and up. These forged aluminum replacements are available in numerous bore, stroke, size, and other configuration options. The sets feature: * Forced pin oilers from the oil ring * Pin fitted * Vertical gas ports * 3-D dome and pockets * Designed for nitrous applications * H-13 pins, locks and support rails (if required) included

Not Yet Reviewed

$134.00

EMAX Industrial Piston Compressors

Offering the same quality and durability as their Industrial Plus Series (without the extra cost of some features), EMAX Industrial piston compressors are designed for up to 50,000 hours of commercial or industrial use with proper maintenance. At the core of these extremely durable compressors are super-quiet pumps featuring cast iron crankcases, precision-balanced cast iron crankshafts, and high-quality stainless steel roller bearings to ensure smooth, efficient operation. For long life and rebuildability, EMAX adds steel connecting rods with replaceable rod bearing inserts, removable cast iron cylinders and cylinder heads, disc intake and exhaust valves, and cast iron flywheels with built-in fans. These bigger low-rpm pumps have a larger bore and stroke, so you get big cfm output with reduced friction and heat buildup. Industrial Series compressors have name brand, open-drip (OPD), low-rpm motors (1,750 rpm). Because of their higher torque factor, compared to the 3,450 rpm motors most manufacturers use, they run much cooler. With low harmonic distortion, these motors provide much higher torque in cold weather starting, and require less electricity to start. Other features include large starting and running capacitors, and dynamically balanced armatures. Running and starting windings are all copper-wound for premium efficiency, reliable performance, and durability. These motors meet all UL and CSA requirements and include pre-wired Condor combination starter and pressure switches with actuation-type diaphragms. EMAX uses only taper-lock style, 2-groove pulleys with dual 2-groove, B-style belts to drive their pumps. Dual belts ensure long belt life with low vibration for smoother, quieter operation because dual belts do not have to be as tight as a single belt. Tighter belts put more load on the compressor pump and the motor bearings; that decreases the life of both. Much better than a fixed bore pulley with a set screw; the taper-lock design locks the pulley in position on the motor shaft preventing it from loosening or moving. EMAX piston compressors also feature: * Head unloaders allow for load-less starting and can help cool the pump in high-duty cycle applications * Built-in inter-coolers and after-coolers * OSHA-approved, 13-gauge steel, expanded metal belt guards * ASME code-compliant tanks * Extended tank water drain pipes plumbed to the front with 1/4 in. ball valve handles * 100 percent brass check valves, safety valves, and ball valves * Top-quality plumbing fittings * Big 1 3/8 in. output shafts * 15 Service Factor motors can be pulled 15 percent over full load

4.5 out of 5 stars ( 2 )

$8,394.60

Optic Armor Oversized Formed Windows

Optic Armor oversized formed windows are highly scratch and chemical-resistant while being 50 to 75 percent lighter than glass. They are made from high-optical grade polycarbonate, making them virtually shatterproof, providing added durability as well as safety for the driver or operator. Products requiring a screen printed border are printed with a high-quality, permanent ink that will not flake or crack and gives the window a professional touch. Optic Armor offers many vehicle applications in a formed to factory curvature and their oversized windows allow for a cut-to-fit, flush-to-body install that is not only aerodynamic, but gives the installer the ability to create a custom look. Optic armor windows can be cleaned with standard glass cleaner.

2.86 out of 5 stars ( 7 )

$151.00

—

$615.00

FTI Performance Pro Powerglide Level 5.5 Transmissions

Delivering big power for racers, FTI Performance Pro Powerglide Level 5.5 transmissions are an unbreakable unit. Equipped with the FTI creatively designed spiral springs and valve body, these units don't creep when the brake is set—a must in today's racing world. With in-house machining, the transmissions are hand-assembled by one builder, and every clearance is set to exacting tolerances. FTI automatic transmissions house the greatest advances in Powerglide racing technology, and are designed to withstand the rigors of today's high performance engines in an extremely demanding environment. Other features include: * 2200 advertised horsepower rating * Protree transbrake 265 lbs. * Lightened steel clutch hub * 1.80 or 1.69 straight cut planetary * Vasco input shaft * 10-clutch drum * Pro mod wideband * High-flow pump * 300M output shaft

Not Yet Reviewed

$5,349.00

Diamond Pistons Competition Series Pistons

Diamond Pistons Competition Series pistons are for those looking to take their engine to a whole new level of power. These forged aluminum pistons are superior in strength and provide extra protection during the high-stresses of high-compression, forced induction, or nitrous. Diamond Pistons Competition Series features: * 3D milling on piston crowns for "ready-to-install" finish * Generous valve pockets designed to work with stock or oversized valves and various cylinder heads * Constructed from forged 4032 or 2618 aluminum alloy (where specified) * Premium 8620 or H-13 steel wrist pins (where specified)

5.0 out of 5 stars ( 1 )

$78.00

—

$98.00

American Racing Headers Dodge and Ram Truck Headers

When the stock power of your Ram is not enough for pulling serious weight, look no further than American Racing Headers Dodge and Ram Truck headers for increased performance, great sound, and quality you can trust. Featuring mandrel-bent, stainless steel mid-pipes and primaries, they are designed to allow you to reuse factory mufflers or attach to aftermarket exhaust systems. ARH Dodge and Ram Truck headers are available for a variety of engines, including those with square-port or D-port cylinder heads, and transmissions. Sold with or without catalytic converters, they feature efficient, high-flow, state-of-the-art merge collectors that are tuned for maximum horsepower and torque. Additional features of American Racing Headers Dodge and Ram Truck headers include: * 100 percent long-lasting 304 stainless steel * 3/8 in. thick laser-cut flanges for a warp-free seal * Hand-ported TIG-welded inlets * Optimized primary tube routing for superior fit and performance * Merge collectors include welded scavenger spikes * Catted systems feature 200 cell, metallic substrate catalytic converters for extreme durability * Systems include necessary gaskets and hardware * The only set of headers you should ever need to buy * All American Racing Headers exhaust systems are for off-road use only

3.67 out of 5 stars ( 3 )

$2,245.72

—

$3,193.01

Peterson Fluid Systems R4 Oil Pumps

Peterson Fluid Systems R4 oil pumps utilize a revolutionary twisted lobe rotor design, allowing for all-aluminum rotors in all sections—saving a huge amount of weight while also increasing performance. Offered in wet and dry sump styles, the pumps are designed with shallow-depth screw-in fittings, creating low-profile modular units that can be outfitted with numerous options to be suited for a variety of applications. Hundreds of models are available; select the options that best suit your application. Peterson Fluid Systems R4 oil pumps feature: * 6061-T6 billet aluminum * CNC-machined for precision * Unique twisted 4-lobe rotor * Tab mounting system to save weight * Low profile for easier mounting * Wet sump pumps are single stage * Dry sump pumps are offered in 2 to 8 stages * Stages refer to total number of pumping bodies including one pressure section

4.5 out of 5 stars ( 2 )

$832.99

—

$2,506.99

American Racing Custom Order Dropship Only Wheels

American Racing custom order dropship only wheels … you design them; they build them in a state-of-the-art custom wheel shop. They have all the capabilities to handle forged, specialty 2-piece fitments, unique finishes and colors, and drill-from-blank services. Along with custom backspacing available in eighth-inch increments, American Racing can ensure a perfect fit. Each American Racing custom order dropship only wheel is a custom-made product of The Wheel Pros Custom Shop; purchases of custom order dropship only wheels cannot be cancelled, or the wheels returned, once an order has been placed.

5.0 out of 5 stars ( 3 )

$520.00

—

$1,418.00

QuickJack 6000ELX Car Lifts

There's a lot you can do with an extra 3 in.--QuickJack 6000ELX car lifts are designed to raise 3 in. taller than previous models and of course, they provide the same portability, safety, and convenience in your garage that QuickJack is known for. They also provide an extended lift point spread (53 to 76 in.) and longer frame length (86.75 in.). Features: * 6,000 lb. capacity * Lifts higher without sacrificing QuickJack's patented super-low profile when fully lowered * Built with 14-gauge steel * Open center design * Automatic safety locks * Integrated ultra-durable urethane rubber wheels that allow you to roll them into position * Easy to store

5.0 out of 5 stars ( 1 )

$2,256.99

Champ Pans Fabricated Aluminum Valve Covers

Champ Pans fabricated aluminum valve covers bring a no-nonsense, old-school approach to small block engine modification. These valve covers feature a natural finish with no unnecessary decorations and are available for most domestic small block performance engines, left or right side. Order the model recommended for your engine application—then pop the hood and show that you mean business with Champ Pans fabricated aluminum valve covers!

3.33 out of 5 stars ( 3 )

$255.71

—

$279.27

Diamond Pistons Domestic Series Pistons

Diamond Pistons Domestic Series pistons are designed and tested for the high-stresses seen with high-compression, forced induction, or nitrous-fed domestic engines. Engineered with longevity, reliability, and strength, these forged aluminum pistons are specifically designed for your engine to deliver the results you demand. Diamond Piston Domestic Series pistons feature: * 3D milling on piston crowns for "ready-to-install" finish * Generous valve pockets designed to work with stock or oversized valves and various cylinder heads * Constructed from forged 4032 or 2618 aluminum alloy (where specified) * Premium 8620 or H-13 steel wrist pins (where specified)

5.0 out of 5 stars ( 2 )

$78.00

—

$150.00

Vintage Air Stainless Steel Refrigerant Lines

Vintage Air stainless steel refrigerant lines are designed and produced by experienced street rodders who have been involved in the sport for over 30 years. Vintage Air offers the most comprehensive line of high performance air conditioning components available. Every Vintage Air product incorporates the very latest technology and offers you the greatest efficiency and reliability available. So, when you're cruising in your beautiful classic car on a hot summer day, keep it cool with a Vintage Air stainless steel refrigerant lines kit.

Not Yet Reviewed

$11.99

Parts and Accessories