Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
Transmission & Drivetrain
Zumbrota Remanufactured Manual Transmissions
Zumbrota remanufactured manual transmissions are some of the most dependable 5-speed, 6-speed, and transaxle units available. Each transmission is put through tremendous testing and inspections to assure the highest quality possible to use in your vehicle. Benefits of Zumbrota remanufactured manual transmissions include: * A pre-inspection is done to ensure the unit is free of case cracks, excessive wear and to catch other OEM related problems that many cores have * A second inspection is conducted during the remanufacturing process to ensure all component parts meet OEM specifications * A final post-build inspection is done to ensure unit is built to their strict standards * All units are quality inspected throughout the remanufacturing process to maintain our quality standard * All housing and top covers are cleaned utilizing their state-of-the-art hydro-blasting and rinsing process--this brings all cases back to the OEM finish * 100 percent inspection of internal parts, including gear wear checks, main shaft straightness test and synchronizer testing * 100 percent replacement of seals, bearings, and other common wear components * Units are shipped in high-density plastic totes to help eliminate in-transit damage * All transfer cases are sold with a standard 2 year/unlimited mileage warranty
( 21 )
$1,546.99
—
$1,979.99
RAM Truck Pulling Custom Order Clutch Kits
RAM truck pulling clutch kits are custom-assembled for your specific application. These units feature a heavy-gauge steel cover with welded spring guides and a steel pressure ring. Flywheels are available in 30 or 40 lb. weights, as well as in billet aluminum. The clutches can be set up with either 5135 or 5191 compound iron discs with 1 to 10 splines. Single disc slipper-style clutches can be used with engines producing up to 800 hp, or where very limited slipping is desired. These clutches utilize the same quality components as the RAM dual disc pulling clutches. These units can be assembled with your choice of sintered iron disc materials and flywheel weights. Dual disc clutches will allow a more controlled slip as the vehicle comes out, without severe wear or every-round maintenance. Dual disc clutches are built to fit different stock depths or deep bellhousings.
( 2 )
$1,849.99
Zumbrota Remanufactured Transfer Cases
Zumbrota remanufactured transfer cases are put through a proprietary cleaning method, and arrive looking like new. But before they ship, each unit goes through complete inspection, component replacement, and quality control process to assure dependable, reliable shift-ability. Zumbrota rebuilds units from New Process, Borg Warner, and other major manufacturers to fill fitments for foreign and domestic passenger cars, trucks, and SUVs. Benefits of Zumbrota remanufactured transfer cases include: * A pre-inspection is done to ensure the unit is free of case cracks, excessive wear and to catch other OEM related problems that many cores have * A second inspection is conducted during the remanufacturing process to ensure all component parts meet OEM specifications * A final post-build inspection is done to ensure unit is built to their strict standards * All units are quality inspected throughout the remanufacturing process to maintain our quality standard * All cases are cleaned utilizing their state-of-the-art hydro-blasting and rinsing process--this brings all cases back to the OEM finish * 100 percent replacement of seals, bearings, viscous couplers (when applicable), and other common wear components * Units are shipped in high-density plastic totes to help eliminate in-transit damage * All transfer cases are sold with a standard 2 year/unlimited mileage warranty
( 7 )
$1,507.99
—
$1,991.99
Zumbrota Remanufactured Axle Assemblies
Zumbrota Drivetrain remanufactured axle assembles offer reliable performance at a value price. They're available for thousands of applications—from passenger and off-road vehicles, to race cars and pulling trucks. The axle tubes are straightened to OE specifications; the housings are hydro-blasted and rinsed, then tested for surface wear and cracks; and the gear patterns and rolling torque are properly adjusted to ensure optimum tooth contact. Zumbrota replaces all seals, bearings, crush sleeves, pinion nuts, and shims on the front and/or rear axle assemblies. Order the replacement model recommended for your specific vehicle.
( 9 )
$1,517.99
—
$1,999.99
TCI PRO-X Torque Converters
These TCI PRO-X torque converters are designed specifically for Top Sportsman, Top Dragster, and Outlaw Street Car classes. Able to handle 2,500+ hp applications (including multi-stage, nitrous-assisted, supercharged, and twin turbocharged engines), these high-strength torque converters feature a TCI exclusive--HDT (Heat Dissipating Technology) Coating--further enhancing their ability to deliver unsurpassed consistency and durability. Features include: * Hand-built steel stator * Forged mounting cover * 3 sets of heavy-duty internal bearings * Furnace-brazed turbine and pump assembly * Built for GM, Ford, and Chrysler transmissions * 4 or 6-bolt flanges and optional billet front available
Not Yet Reviewed
$1,794.95
Moser Engineering Mopar 8 3/4 in. Housing and Axle Packages
Moser Engineering Mopar 8 3/4 in. housing and axle packages give you the freedom to choose the components that you prefer, while still fitting your A, B, or E-body without modifications. The packages include: * MO875 fabricated housing * Axle shaft set with wheel studs * 9400M bearings * Stock located spring perches * Center section studs * T-bolt kit * Gasket
( 2 )
$1,712.00
Hughes Performance Street and Strip Transmissions
Hughes Performance Street and Strip transmissions are made tough enough to deliver tire-spinning shifts race after race. They include internal and external racing components, which increase strength, reliability, and torque capacity. Plus, they feature Hughes' manual/automatic valve body to provide precise manual or fully automatic shifting. Choose the transmission type best suited for your vehicle.
( 30 )
$1,917.99
—
$1,961.99
Hughes Performance Pro-IV Series Torque Converters
Hughes Performance Pro-IV Series race converters are available from an entirely new casing and are built differently than our other full race torque converters. These units are more aggressive, delivering a hard hit off the line and soft transition down track with no loss in top-end efficiency and mph. They run faster than any other 9 in. that Hughes has ever produced, give you consistency at 60 ft. that you won't believe, and still let you kill the tree. They also offer you a great reaction time, a more aggressive stator, and a less aggressive fin angle.
Not Yet Reviewed
$1,721.99
Hughes Performance Pro-V Series Torque Converters
Hughes Pro-V series race converters are available from an entirely new casing and are built differently than Hughes' other full race torque converters. These units are the most aggressive race converters, delivering a hard hit off the line and a soft transition down track, with no loss in top-end efficiency and mph. They run faster than any other 9 in. converter Hughes has ever produced, and yet give consistency at 60 ft. that you won't believe, and still let you kill the tree. They also provide great reaction times, more aggressive stator, and a less aggressive fin angle.
Not Yet Reviewed
$1,633.99
—
$1,843.99
Winters Early Ford V8 Quick-Change Center Kits
Winters early Ford V8 quick-change center kits provide you with what you need to build your own custom rear-end. These kits are for use with early Ford bell tubes, axles, and differentials. The assemblies use original early Ford steel tubes and bells, axles, and carrier assemblies. Each kit comes complete with one quick-change center section, a 4.11:1 ring and pinion, one axle housing gasket set, one carrier bearing, and one straight cut, 6-spline gear set of your choice. Hardware and instructions are included.
Not Yet Reviewed
$1,949.99
TCI Competition Torque Converters
TCI Competition torque converters are proven race winners and an excellent choice for stock and Super Stock cars. They work well with both big and small blocks, producing power between 4,500 and 7,000 rpm. You'll maintain engine rpm between shifts with their efficient design, and gain improved reliability with an oversize caged bearing supporting a new stator. ETs are more consistent and reaction times faster as a result of a stronger housing, which resists flexing and ballooning.
( 9 )
$1,506.95
—
$1,914.95
Strange Custom Ford 9 inch Pro Iron Center Sections
Strange custom Ford 9 in. Pro Iron center sections will give you the perfect foundation for a high-quality, bulletproof rear differential. They feature a fully assembled nodular iron case, posi-unit/spool, upgraded pinion support, S-Series yoke, and ring and pinion set. Specification will be required to complete order. Please call us at 1-800-230-3030 for further information.
( 1 )
$1,594.99
—
$1,694.99
Strange Ford 9 in. Lightweight Aluminum Center Sections
Strange Ford 9 in. lightweight aluminum center sections will give you the perfect foundation for a high-quality, bulletproof rear differential. They feature a fully assembled aluminum case with a full spool, forged aluminum pinion support, S-series yoke, and ring and pinion set. A specification sheet is required to be filled out prior to ordering.
( 2 )
$1,648.99
—
$1,794.99
Strange Ford 9 in. HD Pro Aluminum Custom Order Assemblies
Strange Engineering has developed the iconic Ford 9 in. rear axle into an extensive line of parts and complete HD Pro aluminum custom order assemblies that take advantage of the strengths of the original, while improving on strength, performance, and flexibility. These axles consist of forged aluminum pinion supports, with a lightweight steel spool or clutch posi unit and your choice of gear ratio in a standard gear, fully assembled with yoke. The most popular rear-end around is the Ford 9 inch unit; it is used by restorers, street rodders, and racers alike, regardless of what brand of car they're restoring.
( 2 )
$1,717.99
—
$1,992.99
Valair Performance Competition Dual Disc Clutch Kits
Valair Performance Competition Dual Disc clutch kits are constructed with top-of-the-line materials and built-to-order, ensuring you get exactly what's needed for your application. These assemblies contain many parts, including a dual disc flywheel, release and heavy-duty pilot bearings, and ceramic clutch discs. They're able to handle up to 800 hp on your land-based beast and require the installation of a heavy-duty hydraulic kit. Get crisp shifts and high performance with a Valair Competition Dual Disc clutch kit, available in sizes and options to fit countless vehicles.
Not Yet Reviewed
$1,648.52
—
$1,719.29
Moser Engineering Ford 9 in. Third Member Assemblies
Moser Engineering Ford 9 in. third member assemblies are designed to help you get that horsepower to the ground. They include your choice of an aluminum, nodular iron, or stock center section, as well as a differential, an axle spline, a U-joint style yoke, pinion support, and gear ratio. Whether you're assembling a daily driver, street rod, or race car, these Moser third member assembly packages will provide the durability that your vehicle deserves.
( 11 )
$1,593.00
