Availability
Melling's years of experience are apparent in these Performance oil pumps. They boast a CNC-machined body and cover and hardened steel gears that are up to 25 percent longer, providing additional flow to performance engines with wider bearing clearances. Their drive and idler shafts have been extended into the cover to provide additional support and eliminate dynamic shaft deflection.
( 192 )
$119.99
—
$582.99
Summit Racing™ hydraulic roller lifters are designed with two things in mind: High quality and affordability. We think you'll be happy with the results. These lifters are made to fit your OEM hydraulic roller camshaft engine with no modifications.
( 4 )
$199.99
The Edelbrock Power Package concept is second to none. To make things easier in parts selection, Edelbrock has taken the guesswork out of top-end component selection by actually placing the power package components together in complete kits. They include almost everything you need to make serious horsepower. These kits are available with different cams, intakes, and heads to deliver the torque and horsepower you're looking for. Horsepower output will vary depending on combinations of accessories used.
( 11 )
$2,389.95
On Sale
Summit Racing™ Performance LS7 hydraulic roller lifters are a definite upgrade over stock originals. Designed for high horsepower engines that demand increased oiling and higher-rpm capabilities, these replacement lifters will fit in SBC roller engines, as well as LS-based engines without active fuel management (AFM/DOD). Beat the competition to the finish line with Summit Racing™ Performance LS7 hydraulic lifters!
( 19 )
$234.99
Summit Racing™ Pro LS Truck Swap cams are affordable and give you maximum punch where the torque converter hits. The cam lobes are designed for excellent valvetrain longevity. Both drop-in or high-lift versions are available. They come in stages allowing you to quickly determine which gives you the idle and efficiency you are looking for. Idle response and the midrange torque from theses camshafts is unmatched. Starting with American bearing steel, they are precision machined on a Landis 3LB CNC grinder with CBN diamond wheels for an extremely good finish quality. The lobes have been designed for stability at high rpm with the spring pressures found in commonly available, quality spring packs.
( 91 )
$299.99
—
$319.99
Swapping a GM LS based engine just got a lot easier! Summit Racing™ Pro LS cast aluminum oil pans are specifically designed to install an LS engine in a variety of GM muscle car and truck chassis. These pans offer OEM fitment, oil filter mounting, oil cooler provisions, and use OEM-style gaskets. They are manufactured from cast aluminum to provided proper structural rigidity and heat dissipation. The pans include a baffle, oil pickup tube, sump plug, oil filter stud, and oil passage cover.
( 18 )
$379.99
—
$399.99
Clevite H-Series rod bearings were developed primarily for use in NASCAR type racing but are suitable for all types of competition engines. These H-Series bearings have a medium level of eccentricity, high crush factor, and have hardened steel backs and thin overlays. They also have enlarged chamfers for greater crankshaft fillet clearance and are made without flash plating for better seating. Bearings with .001 in. extra clearance are available for standard size shafts and with or without dowel holes. H-Series bearings are recommended for use with crankshafts that have oversize fillets and where engines run in the medium to high rpm range. They should also be used if contact patterns obtained with Clevite P-Series bearings are too narrow. Contact patterns should ideally cover 2/3 to 3/4 of the bearing surface.
( 163 )
$9.50
—
$37.99
You don't have to sacrifice safety or quality to save money; our affordable Summit Racing™ bracket racer SFI dampers have been spin-tested to 12,500 rpm and carry an SFI-18.1 rating. The carbon steel dampers have an injection-molded and bonded elastomer, easy-to-read engraved timing marks, removable counterweights (where applicable), and a highly polished baked-enamel finish, so they look as good as they perform.
( 390 )
$161.99
—
$228.99
On Sale
Are you looking for a set of entry-level street performance heads for your modern street rod, muscle car, or truck? Edelbrock E-Street cylinder heads are just the ticket. These heads feature A356 aluminum castings that are heat-treated to T-6 specs for superior casting strength and quality. Their modern combustion chamber design helps to improve the combustion process and their larger-than-stock intake and exhaust ports help to move more air through your engine. These features improve an engine's efficiency, resulting in more horsepower and torque and improved mileage potential. All Edelbrock E-Street cylinder heads are assembled with manganese bronze valve guides, powder metal interlocking valve seats, and stainless steel one-piece valves with hardened valve tips. Edelbrock E-Street cylinder heads are ideal for entry level street performance engines.
( 119 )
$1,291.95
—
$2,308.95
$1,162.76
—
$2,078.06
Summit Racing™ SPC Engine Blocks are aftermarket V8 Engine Blocks made for "Street, Performance, or Competition." These new clean sheet designed aftermarket blocks are cast in a modern state-of-the-art German foundry on brand new molds and machined in USA on modern high-speed machining centers that can hold the tightest of tolerances. Why start your engine build with a dirty, old, worn-out production block that needs hundreds or thousands of dollars of machine work--when you can start with a new heavy-duty casting full of high-performance features. We ship these blocks mostly finished but leave the cylinder bore .005" undersize, your machine shop will have to hone them for proper size. You can rest assured that you have a great foundation for your engine build. Check out the features below! Additional details: • Available Versions Include: GM Small Block, GM LS, GM Big Block (coming Soon,) Ford Windsor 5.0 and 351W • Cast in Germany at a Tier 1 OEM foundry • Made with class 35 Iron Alloy, Higher tensile strength and harder than competitors' class 30 • Machine-finished in USA on precision hi-speed machining centers- All dimensions are very accurate! • Priority main oiling systems & Siamese Cylinder bores • Blind head bolt holes • 4-bolt main caps, 180,00 PSI main bolts included
( 11 )
$2,249.99
—
$3,399.99
No longer do you have to fight with cartridge filter cap removal and filter assembly. Baxter Performance cartridge-to-spin-on adapters help you convert to easy-to-use and reliable spin-on oil filters. Machined from aluminum and anodized for added durability and lasting good looks, the adapters retain more oil for faster oil delivery and pressure at startup. Choose the adapter designed for your vehicle. Note: Using the adapters will add 1.25 in. of distance from the engine filter housing opening plus the length of your chosen spin-on filter. Please consider these dimensions and associated clearances when ordering.
( 46 )
$199.50
—
$359.96
The Ford Performance Parts engine team has unleased the 7.3L Megazilla crate engine! The Megazilla features the Ford Performance 7.3L intake manifold, CNC-ported cylinder heads, forged pistons and connecting rods. The Megazilla crate engine cranks out 612 hp and 670 lbs.-ft. of torque in a streetable package running on premium pump gas. Megazilla crate engine features: * 7.3L displacement * 10.5:1 compression * (M-6049-SD73P/M-6050-SD73P) CNC-ported aluminum cylinder heads * (M-9424-73LP) low-profile intake manifold * (M-9926-M5292) 92mm throttle body * Mahle forged pistons * Callies H-beam forged connecting rods * (M-6303-SD73) production steel crankshaft * (M-6250-SD73A) hi-performance 7.3L camshaft w/ VCT delete * (M-6010-SD73) production cast iron block Peak power output (J607 standard): * 612 hp @ 5,580RPM * 670 lbs.-ft. of torque @ 3,920RPM * Over 500 lbs.-ft. of torque from 2,500 rpm to 6,000 rpm Assembly includes: * Coils/plug wires/spark plugs * Production oil pan * (M-6038-73) shipping/storage cradle * Production engine wiring harness Additional information: * Bellhousing bolt pattern same as the Ford 4.6/5.4 and Coyote 5.0L * For control packs, please refer to part number: M-6017-73M and M-6017-73A (sold separately) * Custom calibration required * For starter, please refer to part number: M-11000-SD73 (sold separately) * For FEAD, please refer to part number: M-8600-SD73 and M-8600-SD73AC (sold separately) This part is designed and intended for competition use only or off-highway use only. It should not be installed on a vehicle that is driven on public roads and highways. Installation of this part on a vehicle driven on public roads and highways is likely to violate U.S. and Canadian laws and regulations relating to motor vehicle emissions.
Not Yet Reviewed
$23,397.99
Trick Flow® Double platinum .660 LS dual valve spring and retainer kits are designed to provide maximum performance and reliability for your LS-based build. All components are made from a proprietary blend of alloys and tested under rigorous conditions to ensure that they perform and last at the highest levels. These racing valve springs are made with cutting-edge material and processing advancements. The retainers are available in titanium or chromoly steel and are precision machined to reduce unnecessary weight. The kits are designed for drop-in installation into any standard LS-style heads with no machining and include all necessary components and work with most hydraulic roller valvetrains. Whether you use them in your street or race machine, Trick Flow® Double platinum .660 LS dual valve spring are built to perform and will help get the most out of your LSX.
( 13 )
$258.99
—
$353.99
Summit Racing™ camshaft retainer plates secure your cam in the block where it belongs. Designed to fit behind the camshaft timing gear, these plates keep end play under control. They're available in different styles for fitment on a variety of Chevrolet small block, big block, LT, and LS-based engine applications from the 1990s and up.
( 92 )
$18.99
—
$19.99
Summit Racing™ LS Series retrofit trunnion kits are the answer for LS engines with higher lift camshafts and heavier-than-stock valve springs. These trunnion bushing kits are designed to maximize peace of mind by completely eliminating the needle bearings and providing maximum lubrication to the trunnion—while also providing maximum load carrying capabilities many times greater than needle bearings. Rocker arm trunnion upgrade kits include: * 16 micro polished hardened steel pivots/trunnions * 32 high performance C932 bearing bronze bushings * 32 retainer clips
( 70 )
$179.99
Trick Flow® Track Max® hydraulic roller camshafts for small block Ford and Ford 5.0L engines are designed and dyno-tested to ensure maximum performance. These camshafts are manufactured from premium billet steel blanks that are heat-treated to the proper hardness. They're precision-ground to exacting tolerances to deliver enhanced power and proven Trick Flow® performance throughout the engine's powerband.
( 61 )
$349.99
Clevite H-Series main bearings were developed primarily for NASCAR racing, but are well suited to other types of competition engines as well. They're especially good for engines that run at medium-to-high revs. They have steel backings with carefully selected overlays and a high crush factor, plus a medium level of eccentricity. H-Series bearings have enlarged chamfers at the sides for greater crank-fillet clearance and are made without flash plating for better seating. They are also available with either 180 degree or 360 degree oil grooves, as well as an extra 0.001 in. of clearance.
( 136 )
$49.99
—
$237.99
Edelbrock Power Package concept is second to none. To make things easier in parts selection, Edelbrock has taken the guesswork out of top-end component selection by actually placing the power package components together in complete kits. They include almost everything you need to make serious horsepower. These kits are available with different cams, intakes, and heads to deliver the torque and horsepower you're looking for. Horsepower output will vary depending on combinations of accessories used.
( 20 )
$2,841.95
Summit Racing™ OE-style harmonic dampers are ideal for those mild street rebuilds that don't require the expense of a high-buck race damper. They feature durable nodular construction with bonded elastomer between the inner and outer rings. The balancers also have engraved timing marks, which means no timing tape! Summit dampers are available in a variety of sizes for many engine balance applications. Models are available for hundreds of vehicles; order the OE replacement recommended for your ride.
( 664 )
$71.99
—
$137.99
Summit Racing™ LS lifter valley covers are race-ready! Manufactured from 1/4 in. thick billet aluminum or cast aluminum. They are available in a plain, polished, black anodized, or copper finish for both gen 3 and 4 versions. Plus, they're etched with the Summit Racing™ logo for a high-tech look! Replace that factory cover with Summit Racing™ LS lifter valley covers.
( 23 )
$59.99
—
$99.99
Trust Summit Racing™ to give you timing sets that will deliver accurate, reliable cam timing. Our billet steel true roller timing sets have rugged double-row, true-roller chains teamed up with billet steel crank and cam sprockets. The crank sprockets have multiple keyways, which allow you to modify your cam timing. Get reliable timing from Summit Racing™ billet steel timing sets.
( 120 )
$101.99
—
$209.99
ARP Pro Series cylinder head studs are cold-forged to ensure molecular integrity. They're heat-treated prior to thread rolling and machining. ARP Pro Series kits are also available with 12-point nuts, and all studs come complete with hardened parallel washers for an even load distribution and accurate torque readings. With hundreds of models ready to ship, these cylinder head fasteners can be ordered for virtually any style engine.
( 798 )
$66.99
—
$1,314.99
ATI Super Damper Serpentine Series harmonic balancers are patented and feature grooves for serpentine belts machined into the outer damper shell. The dampers come with six outer grooves for standard OEM drive systems—but eight and 10 grooves are available for supercharger or turbo applications. Serpentine dampers are offered in a variety of diameters, and crank hubs may be fitted with a 6-groove serpentine pulley to drive external oil pumps or vehicle accessories. The Serpentine Series Super Dampers fit all ATI GM-front crank hubs and can be adapted to many engine combinations, providing maximum flexibility. They're available in steel or lightweight, hardcoated aluminum. Features and benefits: * Eliminates torsional crankshaft vibrations * Exceeds SFI 18.1 specs * Black zinc chromate finished * Tunable, rebuildable, and extremely efficient at all rpms * Laser-engraved 360 degree timing marks
( 238 )
$318.78
—
$588.80
Chevrolet Performance's 350 c.i.d. base long block crate engines are their most popular choice—because no one else can deliver as much performance for this kind of value. Chevrolet Performance believes that everyone should be able to afford a high-quality GM V8 without going broke. Got a tired, old Chevy that needs a lift? Then these replacement engines are just right for you. Chevrolet Performance 350 base long block engine assemblies start with a 4-bolt main bearing block, aluminum pistons, and a hydraulic camshaft. Then they're topped with cast iron cylinder heads designed to be extremely durable, while still providing good airflow through the engine.
( 4 )
$5,472.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
