Availability
Showing In Stock Items. Show All 539 Items.
Melling's years of experience are apparent in these Performance oil pumps. They boast a CNC-machined body and cover and hardened steel gears that are up to 25 percent longer, providing additional flow to performance engines with wider bearing clearances. Their drive and idler shafts have been extended into the cover to provide additional support and eliminate dynamic shaft deflection.
( 188 )
$119.99
—
$239.99
Summit Racing™ hydraulic roller lifters are designed with two things in mind: High quality and affordability. We think you'll be happy with the results. These lifters are made to fit your OEM hydraulic roller camshaft engine with no modifications.
( 19 )
$199.99
You don't have to sacrifice safety or quality to save money; our affordable Summit Racing™ bracket racer SFI dampers have been spin-tested to 12,500 rpm and carry an SFI-18.1 rating. The carbon steel dampers have an injection-molded and bonded elastomer, easy-to-read engraved timing marks, removable counterweights (where applicable), and a highly polished baked-enamel finish, so they look as good as they perform.
( 388 )
$161.99
—
$277.99
Summit Racing™ Performance LS7 hydraulic roller lifters are a definite upgrade over stock originals. Designed for high horsepower engines that demand increased oiling and higher-rpm capabilities, these replacement lifters will fit in SBC roller engines, as well as LS-based engines without active fuel management (AFM/DOD). Beat the competition to the finish line with Summit Racing™ Performance LS7 hydraulic lifters!
( 18 )
$234.99
Summit Racing™ LS Series retrofit trunnion kits are the answer for LS engines with higher lift camshafts and heavier-than-stock valve springs. These trunnion bushing kits are designed to maximize peace of mind by completely eliminating the needle bearings and providing maximum lubrication to the trunnion—while also providing maximum load carrying capabilities many times greater than needle bearings. Rocker arm trunnion upgrade kits include: * 16 micro polished hardened steel pivots/trunnions * 32 high performance C932 bearing bronze bushings * 32 retainer clips
( 68 )
$179.99
Clevite H-Series main bearings were developed primarily for NASCAR racing, but are well suited to other types of competition engines as well. They're especially good for engines that run at medium-to-high revs. They have steel backings with carefully selected overlays and a high crush factor, plus a medium level of eccentricity. H-Series bearings have enlarged chamfers at the sides for greater crank-fillet clearance and are made without flash plating for better seating. They are also available with either 180 degree or 360 degree oil grooves, as well as an extra 0.001 in. of clearance.
( 134 )
$101.99
—
$208.99
Trick Flow® Double platinum .660 LS dual valve spring and retainer kits are designed to provide maximum performance and reliability for your LS-based build. All components are made from a proprietary blend of alloys and tested under rigorous conditions to ensure that they perform and last at the highest levels. These racing valve springs are made with cutting-edge material and processing advancements. The retainers are available in titanium or chromoly steel and are precision machined to reduce unnecessary weight. The kits are designed for drop-in installation into any standard LS-style heads with no machining and include all necessary components and work with most hydraulic roller valvetrains. Whether you use them in your street or race machine, Trick Flow® Double platinum .660 LS dual valve spring are built to perform and will help get the most out of your LSX.
( 12 )
$258.99
Summit Racing™ OE-style harmonic dampers are ideal for those mild street rebuilds that don't require the expense of a high-buck race damper. They feature durable nodular construction with bonded elastomer between the inner and outer rings. The balancers also have engraved timing marks, which means no timing tape! Summit dampers are available in a variety of sizes for many engine balance applications. Models are available for hundreds of vehicles; order the OE replacement recommended for your ride.
( 662 )
$101.99
—
$137.99
Melling high-volume oil pumps give you an additional 20 to 25 percent of much-needed oil volume for your performance application. For those of you who need added pressure, many pumps are supplied with a high-pressure spring (where noted). The pumps are built using a proprietary casting process, which yields maximum performance and reliability. Every Melling oil pump is completely pressure-tested, including idle and bypass pressure, before it leaves the factory. Dozens of models are available for fitment; order the pump and options needed for your vehicle.
( 347 )
$91.99
—
$190.99
Trust Summit Racing™ to give you timing sets that will deliver accurate, reliable cam timing. Our billet steel true roller timing sets have rugged double-row, true-roller chains teamed up with billet steel crank and cam sprockets. The crank sprockets have multiple keyways, which allow you to modify your cam timing. Get reliable timing from Summit Racing™ billet steel timing sets.
( 118 )
$101.99
—
$209.99
These Chevrolet Performance engine valley covers are made of aluminum. They can be used for Chevrolet Performance SB2.2, Spider-type, intake manifolds, runners, or race applications.
( 47 )
$209.99
For the hardest working part of your valvetrain, use Summit Racing™ cast steel roller tip rocker arms. Our chromoly steel long-slot rockers will give you a long service life and allow for less deflection and valve guide scrubbing. Each rocker features a precision-ground roller and includes a grooved, heat-treated rocker ball and nut.
( 101 )
$140.99
—
$182.99
Summit Racing™ offers engine oil change kits for hundreds of foreign and domestic vehicles. The combo kits include 5 to 10 quarts (depending on selection) of a Mobil Advanced full-synthetic motor oil, the official blend of NASCAR. It protects your engine for up to 10,000 miles. Each kit also includes an oil filter. Maintain your late model car, truck, van, or Jeep with a complete lubrication solution from Summit Racing™.
( 16 )
$117.89
Mopar Replacement lifters offer an original equipment fit. That means their fitment and install will be hassle-free. Whether you call them lifters, tappets, or followers, these genuine Mopar replacements will fit the profile of your camshaft lobes to keep your engine running its best.
( 4 )
$114.99
—
$252.99
Valve springs are one of the most critical and overlooked components in your engine. They must be matched to your cam in order for the engine to reach its full potential. Summit Racing™ springs are made from high quality steel with precision winding and surface treatments. Special consideration for reduced valvespring and retainer mass ensures stability at high rpm. This reduces valve float, extends the rpm range, and greatly reduces valvetrain wear.
( 29 )
$206.99
J&L Oil Separator Co.'s new oil separators are the perfect addition to your high performance machine. They're everything you're missing to filter out oil vapors that could damage your internal engine components over time. The 3 oz. tanks nearly triple their original design in size—and feature a thick billet construction that's available in a clear or stealthy black anodized finish. Their new multi-stage filtration system collects the finest of vapors and drops them into an easily removable bottom. Clean air is then able to pass through, saving components such as your intake tube and manifold runners. J&L Oil Separator Co. oil separators include the fittings you'll need to make installation a breeze. Order the model tailored for your vehicle.
( 365 )
$169.00
—
$179.00
Offering a level of True Roller advantage for the value-racer, Cloyes upgraded the cam sprockets to feature the strength of billet steel and added critical functioning features. The billet steel durability, 9-keyway induction-hardened crank sprocket, .250 True Roller chain, and precise CNC machining together offer quality and adjustability unmatched in their class. Features include: • Billet steel cam sprocket • Induction heat-treated billet steel crank sprocket • 9 keyways allow +/- 8 degrees • Adjustability in 2 crank degree increments • True Roller chain with .250 in. diameter rollers
( 143 )
$102.99
—
$154.99
Edelbrock Elite II Series valve covers are the next generation of the original Elite Series valve covers. The Elite II Series feature a design that is influenced by the Elite Series originally released in 1985, but with a new modern take on this classic look. The valve covers are made from heavy-gauge, die-cast aluminum and are finished off with a show quality high luster polished finish. The raised fins are accented by a contrast gloss black finish between the fins for the definitive Elite Series look. Depending on application, Elite II valve covers are available in both stock and tall styles. Tall profile valve covers are 2 in. taller than stock and clear most roller rockers and valve train components, while the stock profile versions clear accessories like air-conditioning and alternator brackets.
( 177 )
$173.95
—
$196.95
Edelbrock Performer-Plus cam and lifter kits are designed for optimum torque from the low-end to the mid-range. They feature smooth idling cams for daily drivers, trucks, vans, RVs, and 4x4s. They offer improved throttle response and torque. Each kit includes a camshaft, hydraulic lifters, assembly lube, and instructions.
( 113 )
$302.95
Clevite P-Series main bearings are the oldest members of the Clevite 77 bearing family and are intended for high-revving engines. To compensate for the high-load factors and distortion in these engines, these bearings have higher eccentricity and a high crush factor. P-Series bearings are constructed of tri-metal cast copper lead. They have a steel back for support, a cast copper lead lining to withstand the loads of engine operation, and an electroplated babbit overlay on the running surface to provide searing surface qualities. In addition, the oil grooves on most applications extend all the way around both halves for better oiling. Clevite P-Series main bearings are an ideal design, producing a degree of conformability, embedability, slipperiness, and fatigue resistance, not found in original equipment and competitive bimetal bearings.
( 251 )
$98.99
—
$192.99
Lokar Midnight Series flexible engine dipsticks are designed to coordinate with Midnight Series flexible transmission dipsticks. Their slim design allows for the easy installation inside of headers to work with OEM and Sanderson cast exhaust manifolds. They have clearance for block-hugger headers or can be applied straight into the engine block (without a tube), depending on your application needs. All engine dipsticks feature an E-Z read aluminum or steel stick for an accurate measurement of engine oil. Order the model recommended for your vehicle year/make and engine family.
( 107 )
$113.95
Summit Racing™ economy oil pans bring affordable performance to your engine build. Trap door baffles keep oil under control during hard acceleration and the increased pan capacity keeps your high performance oil system fed properly. Building a stroker? Small block Chevy pans will clear up to 3.75 in. stroke cranks, while the big block Chevy pans will clear strokes up to 4.50 in. Next time you're building on a budget look no further than these Summit Racing™ economy oil pans.
( 128 )
$125.99
—
$193.99
For a lubrication system that can keep up with your high performance engine, start by bolting on one of our Summit Racing™ oil pans. These steel pans are built by hand in America with power-supporting features like a directional windage screen, a trap door baffle for improved oil control, and a built-in crankshaft scraper. They also have magnetic drain plugs, 1/4 in. NPT dipstick fittings (dipstick not included), and a black powdercoated finish for rust prevention. Small Chevy pans are compatible with a 3 7/8 in. stroke, while big Chevy pans work with up to a 4 1/4 in. stroke.
( 100 )
$250.99
—
$261.99
Ford Performance Parts high-strength variable cam timing (VCT) solenoids offer a stronger mounting provision for racing applications. They're more robust and provide increased strength over OEM solenoids. Improve your chances for victory with a set of Ford Performance Parts high-strength VCT solenoids, available for a variety of Mustang and F-150 applications from 2011 and up. .
( 10 )
$106.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
