Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
Van Steel Corvette Parts and Accessories
Van Steel Complete Trailing Arm Assemblies
Van Steel complete trailing arm assemblies are available with factory-style T-arms (no sway bar holes) or offset T-arms with spherical bearings. Additional contents include these new components: * Rotors * Spindles * Caliper mounting brackets * Bearing supports * Backing plates * Stainless steel parking brake hardware * Parking brake shoes * Bearings, seals, and races
( 3 )
$2,229.99
—
$2,299.99
Van Steel X-Tracker Wheel Hub Assemblies
Van Steel offers X-Tracker wheel bearing and hub assemblies for a variety of vehicles—including Chevrolet Corvette applications from 2010 and up. These replacement units are manufactured to precision specifications using premium heat-treated high-carbon steel for superior strength and problem-free performance. Order the front or rear model recommended for your vehicle.
Not Yet Reviewed
$399.99
—
$409.99
Van Steel Wheel Hub Assemblies
Van Steel has been serving the Corvette community for over 40 years, providing parts that are as good as or, in many cases, better than factory. They are ready to help your Corvette ride, drive, and handle to the best of its ability, along with looking and driving the way you want it to. Van Steel wheel hub assemblies come complete with Timken USA bearings and races and a corrosive-resistant coating. In these front hubs, the races will be installed along with new stock size wheel studs, and a new castle nut, cotter pin, washer, and grease cap are included. Each hub is inspected after the races are installed for proper run-out spec to ensure optimal braking performance and no pad knock. Choose the kit specified for your Corvette.
( 3 )
$316.99
Van Steel T-Arms
Van Steel T-Arms or offset trailing arms allow you to run a wider tire on a stock rim or run a wider aftermarket rim with more backspacing (18 in. wheels are needed to clear the leaf spring). They are offset 2 in. but they do not move the bearing assembly, and you retain your factory strut bars and half shafts. All arms are now cast and set up for a spherical PTFE-lined bearing for reduced deflection and binding in the control arm pivot to increase handling and ride quality. Notes and benefits: * Increases wheel backspace clearance over stock T-arms * Bolts in like factory trailing arms * No chassis modifications needed * Can use OE bearing assembly, strut rods, half shafts, and spring * Does not change the placement of the bearing assembly * Replaceable heim bearing at pivot point * Durable black powdercoat finish * Van Steel Limited Lifetime Warranty
Not Yet Reviewed
$754.99
Van Steel Loaded Bearing Supports
How can you take the guess work out of the hardest part of rebuilding your bearing assemblies? Van Steel loaded bearing supports allow you to rebuild your trailing arms without purchasing a bearing setup tool. Available in left hand and right hand versions, these reproductions of the originals contain Timken bearings, SKF seals, and a new dust shield, plus the spacer and shim are set to Van Steel specs. Reduce your rebuild time and utilize Van Steel's bearing specs with their loaded bearing supports.
( 2 )
$241.99
Van Steel Shock Mounts
Van Steel offers a wide range of Chevy Corvette suspension parts, including these replacement shock mounts. Each kit includes two rear shock mounts, two castle nuts, two cotter pins, two dished washers, and two nuts. Order the mounts recommended for your model.
( 3 )
$142.99
Van Steel Adjustable Strut Rods
Van Steel offers adjustable strut rods for a variety of applications, including Chevrolet Corvette models from the 1960s, '70s, and '80s. Stronger than stock, these replacement strut rods are designed to maintain vertical alignment and to decrease negative camber settings—for improved tire wear and handling. Select the kit and components recommended for your vehicle: * Part number: SR-05HDK-2 (fits 1963-82 models) - Adjustable strut rods with rod ends - Forged Ends - DOM Tubing - QA-1 Rod Ends - Seals-it Rod End Seals * Part number: SR-05K (fit 1963-79 models) - Adjustable strut rods/camber rods - Forged ends with poly bushings - DOM tubing - Inboard 1/2 in. hardware * Part number: SR-05LK (fits 1980-82 models) - Adjustable strut rods/camber rods - Forged ends with poly bushings - DOM tubing - Inboard 1/2 in. hardware
( 2 )
$209.99
—
$449.99
Van Steel Spring Bolts
Van Steel has been serving the Corvette community for over 40 years, providing parts that are as good as or, in many cases, better than factory. They are ready to help your Corvette ride, drive, and handle to the best of its ability, along with looking and driving the way you want it to. Van Steel spring bolts are offered in a variety of kits with stock length bolts or longer lengths to gain additional ride height adjustment. They include polyurethane or rubber bushings and washers.
( 12 )
$34.99
—
$54.99
Van Steel Front Coilover Suspension Kits
Van Steel has been serving the Corvette community for over 40 years, providing parts that are as good as or, in many cases, better than factory. They are ready to help your Corvette ride, drive, and handle to the best of its ability, along with looking and driving the way you want it to. Van Steel front coilover suspension kits will enhance the ride and handling of your Corvette. They are offered for small block or big block engines with single adjustable or double adjustable shocks that allow for fine-tuning your suspension. Easy to install, they bolt on just like the factory arms with no modifications needed to your frame or factory components. Realizing most Corvettes drive on radial tires, Van Steel design the upper arms with 6 degrees of positive caster for premium highway stability. Features and contents: * 450 lb. springs (small block) * 550 lb. springs (big block) * Lightweight chromoly A-arms * QA1 single or double adjustable coilover shocks * Upper shock mounting brackets * Spanner wrenches * Factory-style ball joints * Delrin® bushings * Front 1 1/8 in. sway bar with heim end links * Easily adjust ride height and/or corner weigh your Corvette
Not Yet Reviewed
$3,049.99
—
$3,279.99
Van Steel Heavy-Duty Rear Toe Rod Kits
The factory toe rod assembly is inadequate for Corvettes used in serious autocross, track time, or drag racing events. The stock toe rods deflect and allow untimely and unwanted toe changes, resulting in wandering rear tires, increased ETs, and cause the lack of a positive sense of stability when drag racing. In autocross or track time driving, the toe change will upset the cars' ability to corner and reduce the drivers' confidence while cornering, resulting in slower lap times. Van Steel heavy-duty rear toe rod kits will maintain precise rear toe settings during extreme driving and will noticeably improve handling predictability. The center mount has three adjustments to compensate for bump steer, making them ideal for lowered Corvettes or custom chassis setups. The sleeves and bracket have a durable black powdercoat finish and the toe rods are completed with Seal-It dust boots.
Not Yet Reviewed
$436.99
Van Steel T-Arm Bolt and Shim Kits
Van Steel has been serving the Corvette community for over 40 years, providing parts that are as good as or, in many cases, better than factory. They are ready to help your Corvette ride, drive, and handle to the best of its ability, along with looking and driving the way you want it to. Van Steel T-arm bolt and shim kits provide you with everything needed to do both the right and left side. Contents: * One stainless steel shim kit * Two bolts * Two castle nuts * Two cotter pins * Four washers
Not Yet Reviewed
$91.99
Van Steel Alignment Shim Kits
Van Steel has been serving the Corvette community for over 40 years, providing parts that are as good as or, in many cases, better than factory. They are ready to help your Corvette ride, drive, and handle to the best of its ability, along with looking and driving the way you want it to. Van Steel alignment shim kits provide you with enough stainless steel shims for one car. Contents: * Eight 1/32 in. shims * Eight 1/16 in. shims * Eight 1/8 in. shims
( 2 )
$29.99
Van Steel Crossmember Bushing and Reinforcements
Van Steel has been serving the Corvette community for over 40 years, providing parts that are as good as or, in many cases, better than factory. They are ready to help your Corvette ride, drive, and handle to the best of its ability, along with looking and driving the way you want it to. Van Steel crossmember bushing and reinforcements are ideal for street or track upgrades, nearly eliminating all deflection in the differential. They provide a more rigid mount of the differential and raise it for better half-shaft geometry.
( 2 )
$79.99
—
$356.99
Van Steel Lowering Wedges
Van Steel has been serving the Corvette community for over 40 years, providing parts that are as good as or, in many cases, better than factory. They are ready to help your Corvette ride, drive, and handle to the best of its ability, along with looking and driving the way you want it to. Van Steel lowering wedges give your Corvette a better stance. They are offered as a pair of wedges for front springs only or in kits with front wedges and rear spring bolts. The wedges lower your vehicle approximately 3/4 in.
Not Yet Reviewed
$29.99
—
$54.99
Van Steel Control Arm Bolts
Van Steel offers control arm bolts for a variety of applications, including Chevrolet Corvette models from the 1960s, '70s, and '80s. These suspension hardware kits feature: * Upper control arm bushing retaining washers, bolts, and lock washers * Lower control arm bushing retaining washers, bolts, and lock washers * Upper control arm mounting nuts * Lower control arm cross shaft hardware
Not Yet Reviewed
$54.99
Van Steel Frame Gusset Kits
Van Steel frame gusset kits reinforce the front frame of your 1963-82 Chevy Corvette for better handling and road manners. These frame gusset components help reduce flex in the chassis. The 11-piece package includes: * 2 pieces for sway bar horns * 4 pieces to reinforce the lower A-arm cross shaft mounts * 2 pieces for motor mount reinforcements * 1 plug for steering box hole * 2 pieces for rear diff crossmember Sombrero reinforcements
Not Yet Reviewed
$102.99
Van Steel Wheel Bearing and Spindle Rebuild Kits
Van Steel has been serving the Corvette community for over 40 years, providing parts that are as good as or, in many cases, better than factory. They are ready to help your Corvette ride, drive, and handle to the best of its ability, along with looking and driving the way you want it to. Van Steel front wheel bearing and spindle rebuild kits contain top-quality components needed for the job—just add backing plates to complete your spindle rebuild. Choose the proper kit for your Corvette year. Kits include: * Timken bearings * SKF seals * Grease caps * Castle nuts * Cotter pins * Spindle washers * Spindle gaskets * Lug studs * Steering arm hardware
Not Yet Reviewed
$131.99
—
$174.99
Van Steel Half Shafts
Van Steel offers half shafts for a variety of applications, including Chevrolet Corvette models from the 1960s, '70s, and '80s. Half shafts are, essentially, a drive axle that spans roughly half the car, from the wheel to the transaxle or differential. They take power from the vehicle's transmission and differential—and transfer it to the wheels, allowing the vehicle to drive forward. Most kits include two 2.5 in. or 3 in. new shafts, new solid Neapco U-joints, and new flanges. The components have a protective silver paint coating. Order the replacement half shafts recommended for your vehicle.
Not Yet Reviewed
$649.99
—
$799.99
Van Steel Front Camber Braces
Van Steel has been serving the Corvette community for over 40 years, providing parts that are as good as or, in many cases, better than factory. They are ready to help your Corvette ride, drive, and handle to the best of its ability, along with looking and driving the way you want it to. Van Steel front camber braces improves handling and provides a better driver feel. The concept of the braces is to structurally connect the front upper control arm bulkheads together making the front-end stronger. By doing so, you reduce suspension distortion for improved, more responsive handling. Van Steel camber braces are American made from chromoly tubing and TIG welded with CNC-machined attachment flanges to provide an exact fit. They offer a precise fit, are lightweight, require no modifications, and can be installed with basic hand tools and ability.
( 4 )
$269.99
—
$414.99
Van Steel Control Arm Bushing Kits
Van Steel has been serving the Corvette community for over 40 years, providing parts that are as good as or, in many cases, better than factory. They are ready to help your Corvette ride, drive, and handle to the best of its ability, along with looking and driving the way you want it to. Van Steel control arm bushings are offered in a variety of complete car sets covering front and rear, lower and upper, aluminum or steel frame cars. For off-road use, Van Steel control arm bushings feature Delrin® material that boasts many important characteristics including high-tensile and impact strength, low-friction, low moisture absorption, and self-lubrication.
Not Yet Reviewed
$1,259.99
—
$1,519.99
Van Steel Wheel Bearing and Seal Packages
Van Steel wheel bearing and seal packages provide what you need for one wheel. They feature Timken bearings and seals. Packages include: * Inner and outer bearing with race * Inner and outer seal * Dust shield * Cotter pin * Castle nut
Not Yet Reviewed
$69.99
Van Steel Front Caliper Bracket Adapters
Van Steel has been serving the Corvette community for over 40 years, providing parts that are as good as or, in many cases, better than factory. They are ready to help your Corvette ride, drive, and handle to the best of its ability, along with looking and driving the way you want it to. Van Steel front caliper bracket adapters assist with converting your C4's brakes to C5, C6, or C6Z06 calipers. The bracket adapters feature steel construction and include hardware.
Not Yet Reviewed
$224.99
—
$281.99
Van Steel Adjustable Sway Bar end Links
Eliminate any bushing deflection and get more out of your sway bar with Van Steel adjustable sway bar end links. Adjustable for lowered Vettes, each kit includes premium Heims and solid upper bushings for factory sway bars.
Not Yet Reviewed
$199.99
Van Steel Rear Suspension Rebuild Kits
Van Steel offers rear suspension rebuild kits for a variety of applications, including Chevrolet Corvette models from the 1960s, '70s, and '80s. The kits typically include all nuts, bolts, washers, cotter pins, cushions, and rubber or polyurethane bushings needed for installation or maintenance of your rear suspension. Order the kit recommended for your vehicle.
Not Yet Reviewed
$269.99
—
$314.99
