Availability
No longer will fans of the small block Chevy have to choose between vintage looks or modern cylinder head power—Trick Flow® DHC™ 175 cylinder heads give you both! Made from premium grade, lightweight A356-T61 aluminum, DHC™ 175 heads feature the exterior styling and straight spark plug holes that deliver the nostalgic appearance of the original factory performance 186, 291,461,462 "double hump" or "camel back" castings that customers want. To keep with the vintage design, the heads are available with 69' later or without 68' earlier accessory bolt holes cast into them. 60cc CNC-profiled combustion chambers combined with a state of the art valve job and CNC blended bowl work under the valves and small cross-section intake runners promote low-rpm torque increases and boost high-rpm horsepower. The runners are finished with Trick Flow's® superior Fast As Cast® process that precisely duplicates the runner profile and performance levels of fully CNC-ported heads without the added machining cost. Ductile iron valve seats for use with unleaded fuel, stainless steel valves, bronze alloy valve guides, multi-angle valve seat machining, and decks and walls cast extra thick for increased casting strength and to provide extra room for porting round out the features. Trick Flow® DHC™ 175 cylinder heads are available fully assembled or as bare castings. Sold individually.
( 20 )
$849.99
—
$874.99
Trick Flow® Super 23® 175 cylinder heads deliver performance that far exceeds the power capabilities of factory heads on 283-350 c.i.d. small block Chevy engines. It starts with the small cross section Fast as Cast® runners. They promote excellent port velocity for increased low end torque and have a profile that provides excellent flow for making high RPM horsepower on small bore engines. Modern CNC-profiled chambers promote combustion efficiency to maximize power with less ignition timing, reducing the potential for detonation. The result is more power and torque, better drivability, and greater throttle response from your street performance engine. The features don't end there. Trick Flow® Super 23® 175 cylinder heads have improved A356-T61 castings with 3/4" thick decks for added strength and durability. They also have a competition multi-angle valve job, angled spark plugs, and raised valve cover rails for improved rocker clearance and less potential for oil leaks. Heads are available assembled with premium components including stainless steel valves, bronze guides, 7° machined locks, chromoly retainers, and your choice of PAC Racing valve springs for flat tappet or hydraulic roller cams. Trick Flow® Super 23® 175 heads accept most original accessories. They are emissions-legal under CARB E.O. #D-747-1 for 1995 and earlier GM vehicles with Chevy 262–350 engines. Cylinder heads are available fully assembled or as bare castings. Sold individually.
( 1 )
$899.99
Trick Flow® Super 23® 215 cylinder heads give a huge performance boost to race-ready small block Chevy engines. Based on the proven Super 23® head design, the heads feature large, 215cc intake runners for more airflow in the mid and upper RPM range. Fast As Cast® ports deliver near-CNC-ported flow and performance for about the same price as regular cast heads—that means more power for less. Other features include angled spark plugs, raised valve cover rails, and extra-thick decks and walls for custom porting jobs. You can get Super 23® 215 heads with two valve spring packages for different camshaft types and power levels. The standard 453 lb. valve springs are perfect for most hydraulic roller cams. For more aggressive solid roller cam profiles, choose the optional 550 lb. valve springs for proper control at high RPMs. Cylinder heads are available fully assembled or as bare castings. Sold individually.
( 1 )
$1,054.99
Trick Flow® Super 23® 195 cylinder heads give you performance that closely matches CNC-ported cylinder heads—for about the same price as ordinary cast heads! Ideal for 302 to 406 c.i.d. engines, the Super 23® 195 heads feature high-velocity, small cross-section intake runners to promote low-rpm torque and high-rpm horsepower. Fast As Cast® runners deliver near-CNC-ported flow and performance. Angled spark plugs, raised valve cover rails, and extra-thick decks and walls for porting round-out the features. Trick Flow Super 23 195 heads are a direct fit, high performance replacement for factory heads and accept most original accessories. They are emissions-legal under CARB E.O. #D-747-1 for 1995 and earlier GM vehicles with Chevy 262-350 engines. The heads are available fully assembled or as bare castings. Sold individually.
Not Yet Reviewed
$874.99
Build the ultimate classic-looking hi-po Chevy small block with Trick Flow® DHC™ 200 cylinder heads. Patterned after Trick Flow's popular DHC™ 175 as-cast heads, DHC™ 200 heads get the full CNC-ported treatment to substantially ramp up power production. New 64cc CNC-profiled combustion chambers with 2.055 in. intake valves and CNC Street Ported runners promote big increases in high-RPM horsepower and torque. Bronze alloy valve guides, ductile iron valve seats, and stainless steel valves ensure excellent durability, while proprietary valve profiles and multi-angle valve seat machining maximize flow at low lift. Extra thick decks and walls increase casting strength for peace of mind in demanding conditions. Chromoly steel retainers, 7-degree machined steel valve locks, factory intake and exhaust port locations, and your choice of Trick Flow by PAC Racing valve springs are also standard. As with all Trick Flow® cylinder heads, DHC™ 200 heads are cast from A356-T61 aluminum to keep weight low. To preserve the vintage theme, exterior touches like straight spark plug holes, castings with or without accessory bolt holes, and other OE double hump head styling cues deliver the traditional look you're going for. Sold individually.
( 1 )
$949.99
Give your Ford 390-428 more get-up-and-go with Trick Flow PowerPort® 175 cylinder heads. A direct bolt-on for all 1961-76 FE engines, the heads are made from top-quality A356-T61 aluminum so they're much lighter but still as strong as OE castings. Specially optimized intake runners increase airflow velocity, and Trick Flow's extraordinary CNC Street Ported treatment guarantees proper dimensional accuracy and balance between the runners. Other performance improvements of the PowerPort175® heads include bronze alloy valve guides, ductile iron valve seats, and multi-angle valve seat machining on SerdiR equipment. Assembled cylinder heads include premium 11/32 in. stainless steel valves, Trick Flow® by PAC Racing valve springs, 7 or 10 degree steel valve stem locks, and chromoly or titanium retainer options. The heads are available fully assembled or as bare castings. Sold individually.
( 9 )
$1,099.99
Trick Flow® Track Max® hydraulic roller camshafts for Ford 4.6L/5.4L 2V modular engines are designed and dyno-tested to ensure maximum performance. These camshafts are manufactured from premium blank cores that are heat-treated to the proper hardness. They're precision-ground to exacting tolerances to deliver enhanced power and proven Trick Flow® performance throughout the engine's powerband.
( 2 )
$974.99
Trick Flow GenX® 220 cylinder heads for GM 6.0L LS2 engines are a great value in GM LS performance. The cathedral port heads incorporate features of Trick Flow's fully CNC-ported LS heads in a more affordable "Fast As Cast®" version that flows nearly as much air as Trick Flow's competition ported heads. The special Fast As Cast runner design duplicates the port shape and profile of fully CNC-ported runners, resulting in near-CNC-ported performance for the same price as regular cast cylinder heads. Other features include shallower 13.5° valve angles to decrease valve shrouding and increase mid-lift airflow, relocated spark plugs, CNC-profiled combustion chambers with port-to-valve seat blending (bowl blending), improved rocker arm/ valve cover clearance, and a rigid casting design. Trick Flow GenX 220 cylinder heads are emissions-legal under CARB E.O. #D-747 for 1997-present GM vehicles with 5.7L and 6.0L engines. They are available fully assembled or as bare castings. Sold individually.
( 4 )
$1,099.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
