Availability
Intended for 500-plus inch, high-rpm engines, Trick Flow® R-Series intake manifolds for Ford 429/460 provide significant horsepower and torque increases. These single plane intake manifolds feature a one-piece, spider-type design with high-flow, individual extended runners and a raised plenum floor. Other features include A319 aluminum construction, extra material for custom port work, and bosses for nitrous or fuel injection. The intake manifolds are designed for use with Holley 4500 Series Dominator carbs. Overall height to carburetor mounting pad is 8.600".
( 8 )
$724.99
Trick Flow® Track Max® hydraulic roller camshafts for big block Mopar engines are designed and dyno-tested to ensure maximum performance. Track Max® camshafts are manufactured from premium blank cores that are heat-treated to the proper hardness. They're precision-ground to exacting tolerances to deliver enhanced power and proven Trick Flow® performance throughout the engine's powerband.
( 1 )
$520.99
Trick Flow® TFX™ fuel injectors have so many features, it's no wonder that they are considered one of the best aftermarket injectors available! They atomize fuel better, resist clogging, are quieter, and require less energy to operate than other injectors. Low magnetic stainless steel bodies help prevent moisture contamination, and OEM-style clip grooves eliminate possible fuel leaks. Other features include electronically drilled and machined disc-type fuel control valves, improved nozzles and coil windings, and Viton® O-ring seals to prevent air leaks under extreme operating conditions. High-quality, 1/2 micron filter screens keep foreign debris and contaminants from entering the injectors to ensure proper performance and a long life cycle. TFX™ fuel injectors are 100 percent duty cycle tested to ensure reliability and performance. All flow values are at 3 bar (43.5 psi).
( 36 )
$639.99
—
$749.99
Designed from the ports up to provide Ultimate Bolt-On Performance™, Trick Flow's® R-Series intake manifolds will help your big block Mopar make loads of power. The manifolds are designed for use on large cubic inch engines making peak horsepower in the 3,500-7,500 plus RPM range. The manifolds have CAD-optimized, large open plenums and one-piece, single plane runners. Special attention was paid to smooth airflow for equalized air and fuel distribution. Casting the manifolds in lightweight A319 aluminum delivers a substantial weight reduction. Extra material around the port openings allows for port matching and/or full porting. Integral bosses cast into each runner can be drilled and tapped to accept nozzles for nitrous applications. And if all these features don't convince you that Trick Flow® R-Series intake manifolds mean business, the Holley 4500 Dominator carburetor flanges surely will. While designed to produce maximum power with Trick Flow's® PowerPort 270 and 295 cylinder heads, the R-Series manifolds also perform extremely well on engines equipped with other brands of cylinder heads with 270cc and larger intake ports.
( 3 )
$524.99
Accurate valve timing is the key to making horsepower—and Trick Flow® roller rocker arms can help. Excellent for use with stock and aftermarket cylinder heads, these arms feature heat-treated CNC-machined bodies, premium needle-bearing fulcrums, roller tips, and a machined relief for improved valve spring clearance. Trick Flow® roller rockers come complete with polylocks and are offered individually or in sets of 16. They're available in a variety of fitment options for applications from 1955 and up.
( 66 )
$509.99
Tear up the track with a Trick Flow® Track Heat® intake manifold! These aluminum dual plane manifolds feature a one-piece spider-type design with extended, high-flow runners and a raised plenum floor for more horsepower and torque. Other highlights include A319 aluminum construction, integral bosses for nitrous nozzles, and extra material for custom porting. These intake manifolds deliver peak power in the in the 3,000 to 7,000 rpm range and work with all square bore-style carburetors.
( 17 )
$524.99
Take the guesswork—along with meticulous work necessary for accurate port matching—out of dialing in your big cube engine build for huge power numbers with Trick Flow's R-Series 11R 227 port-matched intake manifold. The A319 aluminum manifold's CNC Competition Ported runner treatment has been specially designed and machined with perfect port alignment on Twisted Wedge® 11R 227 cylinder heads. The high-flow, one-piece spider-type single plane design with raised plenum floor puts the powerband in the 3,500-7,500-plus RPM range. Integral bosses allow adding nitrous nozzles. Accepts Holley 4150-style square bore carburetors.
Not Yet Reviewed
$674.99
Trick Flow® R-Series A460 Intake Manifolds deliver significant performance gains in 500-plus cubic inch engines. They are single quad intake manifolds made from lightweight A319 aluminum and include bosses for nitrous or fuel injection. The special one-piece, spider-type design with high-flow, extended individual runners and a raised plenum floor produces sizeable power increases in the 3,500-8,000 rpm range. Additional highlights include extra material for custom porting and a Dominator-style carb mounting pad. R-Series A460 manifolds can only be used with Trick Flow® PowerPort® A460 series cylinder heads.
( 3 )
$749.99
Trick Flow® high-performance flow-matched fuel injectors feature all stainless-steel internals that provide industry-leading atomization and spray patterns, with linear flow at very low pulse widths. Trick Flow’s precision dynamic flow-matched injectors provide more consistent fuel delivery to each cylinder, resulting in reduced emissions, optimized power production, and safer engine operation when pushing the limits of performance. Just don’t take Trick Flow’s® word for it. The results have been verified by multiple USA-based third-party testing labs to ensure consistent results on a variety of test benches. Full characterization data is available to ensure a drop-in, no hassle tuning experience with your stock or standalone ECU. Other notable features include: • 100 percent precision dynamic flow-matched across a range of pulse widths • Unsurpassed balance across a broad range of flow rates • High impedance design • Ultra-compact EV14-style bodies • USCAR connectors • Drop-in, no hassle installation • 8- to 18-volt operating range • 100 psi maximum operating pressure • Full characterization data available for programming stock and/or standalone ECUs • Compatible with gasoline, methanol, and E85 fuels • Sold in matched sets only
Not Yet Reviewed
$574.99
—
$749.99
Take the guesswork—along with meticulous work necessary for accurate port matching—out of dialing in your big cube engine build for huge power numbers with Trick Flow® R-Series 11R 205 port-matched carbureted intake manifold. The A319 aluminum manifold's CNC Competition Ported runner treatment has been specially designed and machined with perfect port alignment on Twisted Wedge® 11R 205 cylinder heads. The high-flow, one-piece spider-type single plane design with raised plenum floor puts the powerband in the 3,500 to 7,500-plus rpm range. Integral bosses allow adding nitrous nozzles. These manifolds accept Holley 4150-style square bore carburetors.
Not Yet Reviewed
$674.99
Take the guesswork—along with meticulous work necessary for accurate port matching—out of dialing in your big cube engine build for huge power numbers with Trick Flow® R-Series 11R 205 port-matched carb-style EFI intake manifold. The A319 aluminum manifold's CNC Competition Ported runner treatment has been specially designed and machined with perfect port alignment on Twisted Wedge® 11R 205 cylinder heads. The high-flow, one-piece spider-type single plane design with raised plenum floor puts the powerband in the 3,500 to 7,500-plus rpm range. Custom-machined fuel injection nozzle ports accept standard Bosch and Siemens-type fuel injectors.
Not Yet Reviewed
$724.99
Designed for engines that work in the 3,500-8,000 rpm range, Trick Flow® Track Heat® intake manifolds for your Ford 429/460 deliver race-like power and torque. These single plane high-rise manifolds feature a one-piece spider design, high-flow extended individual runners, a raised plenum floor for improved fuel atomization and flow velocity, integral bosses for nitrous or fuel injection nozzles, and extra material for custom porting. These Track Heat® manifolds are made from A319 aluminum and are for use with square bore four barrel carbs.
( 6 )
$699.99
Trick Flow® Track Max® hydraulic roller camshafts for GM LT1 engines are designed and dyno-tested to ensure maximum performance. These camshafts are manufactured from premium blank cores that are heat-treated to the proper hardness. They're precision-ground to exacting tolerances to deliver enhanced power and proven Trick Flow® performance throughout the engine's powerband.
( 1 )
$626.99
No longer will fans of the small block Chevy have to choose between vintage looks or modern cylinder head power—Trick Flow® DHC™ 175 cylinder heads give you both! Made from premium grade, lightweight A356-T61 aluminum, DHC™ 175 heads feature the exterior styling and straight spark plug holes that deliver the nostalgic appearance of the original factory performance 186, 291,461,462 "double hump" or "camel back" castings that customers want. To keep with the vintage design, the heads are available with 69' later or without 68' earlier accessory bolt holes cast into them. 60cc CNC-profiled combustion chambers combined with a state of the art valve job and CNC blended bowl work under the valves and small cross-section intake runners promote low-rpm torque increases and boost high-rpm horsepower. The runners are finished with Trick Flow's® superior Fast As Cast® process that precisely duplicates the runner profile and performance levels of fully CNC-ported heads without the added machining cost. Ductile iron valve seats for use with unleaded fuel, stainless steel valves, bronze alloy valve guides, multi-angle valve seat machining, and decks and walls cast extra thick for increased casting strength and to provide extra room for porting round out the features. Trick Flow® DHC™ 175 cylinder heads are available fully assembled or as bare castings. Sold individually.
( 21 )
$649.99
Take the guesswork—along with meticulous work necessary for accurate port matching—out of dialing in your big cube engine build for huge power numbers with Trick Flow's R-Series 11R 227 port-matched carb-style EFI intake manifold. The A319 aluminum manifold's CNC Competition Ported runner treatment has been specially designed and machined with perfect port alignment on Twisted Wedge® 11R 227 cylinder heads. The high-flow, one-piece spider-type single plane design with raised plenum floor puts the powerband in the 3,500-7,500-plus RPM range. Custom-machined fuel injection nozzle ports accept standard Bosch and Siemens-type fuel injectors.
Not Yet Reviewed
$724.99
Trick Flow® crank trigger wheel and bracket kits feature high-quality components designed for use with the Trick Flow® valve cover-mount ignition systems. These ignition systems were specifically designed to be used with Trick Flow® Twisted Wedge® and Twisted Wedge Track Heat® cylinder heads. So, if you're looking for a crank trigger wheel and bracket kit for your Trick Flow® valve cover-mount ignition system, Trick Flow® is a step ahead of you.
Not Yet Reviewed
$524.99
Trick Flow® single plane, rectangular port R-series intake manifolds for your big block Chevy features high-flowing extended runners and raised plenum floors to increase horsepower and torque. They are designed for 500-plus cu. in. engines and deliver maximum power between 3,500 and 8,000 rpm. Plus, their integral bosses for nitrous injection and extra material for custom porting. For use with Dominator-style carbs.
Not Yet Reviewed
$699.99
Trick Flow® fabricated aluminum valve covers allow you to reduce engine weight without sacrificing performance. These tall-height covers clear roller rocker arms and rocker stud girdles. They include new mounting hardware to ensure a correct installation. The valve covers are ideal for a variety of Chevy applications from 1965 and up.
Not Yet Reviewed
$561.99
Valve springs compress and rebound hundreds of times a second. Make sure your next set of valve springs are built to last—and built to win! Trick Flow by PAC Racing beehive valve springs allow you to drop in a more aggressive cam without machining your spring seats (most applications). PAC springs are CNC-coiled from high-tensile-strength, extra-durable Pacaloy™ chrome-silicon steel and double shot-peened beyond Aerospace Material Specifications (AMS) reliability standards.
( 18 )
$519.99
If you're planning an upgrade, do it right for less with Trick Flow® modular Ford SOHC timing sets! Our quality-built timing kits include all of the parts that you need for a complete refresh--and more! The sets include hardened steel timing gears, plus chains, universal tension arms, and plastic chain guides. Also included is a pair of our Trick Flow® patented hex cam gear spacers to hold the cam in position when setting cam timing and torqueing cam gear bolts. Choose either the standard timing kit with fixed sprocket or the adjustable kit with the universal adjustable crank sprocket--adjustable in 2 degree increments--for more versatility. Choose the kits engineered to keep your modular engine running smooth--modular Ford SOHC timing sets from Trick Flow®. How's that for bolt-on performance?
( 4 )
$507.99
Something great just got better! Twisted Wedge 170 cylinder heads now feature updated A356-T61 machined castings previously reserved for Trick Flow's 11R series heads, including a .625" thick deck for more power-making strength. The castings' billet-like appearance seriously increases the cool factor too. Twisted Wedge 170 cylinder heads have Trick Flow's pioneering Twisted Wedge combustion chamber to reduce valve shrouding and enhance high-lift flow. The design features altered 15° intake/17° exhaust valve angles, which tightens the combustion chamber for increased compression and improved piston-to-valve clearance. That allows the use of higher lift cams with stock pistons—even with the 2.020" intake valves! CNC-profiled combustion chambers with relocated spark plugs optimize combustion efficiency, and a choice of 58cc or 61cc combustion chamber volumes allow builders to dial-in the perfect compression ratio. High-efficiency, Fast As Cast® runners and a competition level, multi-angle valve job deliver near-CNC-ported power and airflow at cast head prices. Assembled Twisted Wedge 170 cylinder heads come with top-quality stainless steel valves, bronze guides, PAC Racing valve springs, thread-in 3/8" or 7/16" rocker studs, and chromoly retainers to ensure great durability and longevity. Some Twisted Wedge 170 cylinder heads are emissions-legal under CARB E.O. #D-747-1 for 1996 and earlier Ford 289, 302, and 351W engines. Cylinder heads are available fully assembled or as bare castings. Sold individually.
( 14 )
$649.99
Valve springs compress and rebound hundreds of times a second. Make sure your next set of valve springs are built to last—and built to win! Trick Flow® by PAC Racing dual valve springs are specifically designed for cams with aggressive profiles, and are available with damper coils for extra spring surge prevention. PAC springs are CNC coiled from high tensile-strength, extra-durable Pacaloy chrome-silicon steel and double shot-peened beyond Aerospace Material Specifications (AMS) reliability standards.
( 29 )
$552.99
Something great just got better! Twisted Wedge 170 cylinder heads now feature updated A356-T61 machined castings previously reserved for Trick Flow's 11R series heads, including a .625" thick deck for more power-making strength. The castings' billet-like appearance seriously increases the cool factor too. Twisted Wedge 170 cylinder heads have Trick Flow's pioneering Twisted Wedge combustion chamber to reduce valve shrouding and enhance high-lift flow. The design features altered 15° intake/17° exhaust valve angles, which tightens the combustion chamber for increased compression and improved piston-to-valve clearance. That allows the use of higher lift cams with stock pistons—even with the 2.020" intake valves! CNC-profiled combustion chambers with relocated spark plugs optimize combustion efficiency, and a choice of 58cc or 61cc combustion chamber volumes allow builders to dial-in the perfect compression ratio. High-efficiency, Fast As Cast® runners and a competition level, multi-angle valve job deliver near-CNC-ported power and airflow at cast head prices. Assembled Twisted Wedge 170 cylinder heads come with top-quality stainless steel valves, bronze guides, PAC Racing valve springs, thread-in 3/8" or 7/16" rocker studs, and chromoly retainers to ensure great durability and longevity. Some Twisted Wedge 170 cylinder heads are emissions-legal under CARB E.O. #D-747-1 for 1996 and earlier Ford 289, 302, and 351W engines. Cylinder heads are available fully assembled or as bare castings. Sold individually.
( 27 )
$649.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
