Availability
Trick Flow® makes your carb installation look clean and professional. Installation is easy--just attach these brackets to the base of your carburetor. All of the hardware that you need is included, along with a return spring. The brackets are compatible with most carburetor designs and transmission kickdown cables (except Dominators).
( 92 )
$96.99
These Trick Flow® LT1 air inlet elbows are designed to replace the ugly stock rubber air inlet elbow. They not only add a little bit of dress-up under the hood, but they also eliminate the factory resonator tube and include all provisions for using the factory sensors. These elbows are designed for use with SLP-type airfoils and are sized to work with stock air inlet systems. They will work with most brands of cold air kits, too.
( 45 )
$82.99
—
$103.99
Trick Flow® StreetBurner® and Track Heat® intake manifold hardware kits include all of the hardware originally packaged with a Trick Flow® manifold. Kits include: * Four 5/16-24 in. nuts * Four 5/16-24 in. x 1 3/4 in. studs * Three 3/8 in. NPT pipe plugs * Two 1/4 in. NPT x 1/4 in. hose barb fittings * Two 1/4 in. vacuum caps * Two 5/16-18 in. x 6 in. bolts * One 1/4 in. NPT x 3/8 in. hose barb fitting * One 3/8 in. vacuum cap * One 1/4 in. heater hose spacer * One 7 in. fuel line protective sleeve
( 2 )
$50.99
Multi-port EFI systems need a stable fuel supply at any rpm, and Trick Flow® high-pressure, high-flow electric fuel pumps will do the job. Trick Flow® high-flow pumps also have 5/16 in. inlets and outlets, brass stud terminals for secure connections, and two cushioned clamps for inline mounting.
( 17 )
$94.99
Trick Flow® EFI heat spacer kits help you fit your spacer between the upper and lower intakes to create a heat flow barrier. That keeps the air in the upper intake cooler and denser. Plus, these CNC-machined phenolic spacers provide clearance for taller valve covers. They're available in 3/8 in. and 1 in. thick versions and include gaskets and longer mounting bolts.
( 88 )
$64.99
—
$114.99
These aluminum adapters allow the use of a Trick Flow® EFI intake manifold on 1994-95 5.0L Mustangs.
( 17 )
$111.99
—
$119.99
These Trick Flow® R-Series and 351W intake manifold hardware kits include all of the hardware originally packaged with Trick Flow® manifolds. Includes: * Five 5/16-24 in. nuts * Five 5/16-24 in. x 1 3/4 in. studs * Two 3/8 in. NPT pipe plugs * Two 1/4 in. NPT x 1/4 in. hose barb fittings * Two 1/4 in. vacuum caps * One 5/16-18 in. x 6 1/2 in. bolt * One 1/4 in. NPT x 3/8 in. hose barb fitting * One 3/8 in. vacuum cap * One 1/4 in. heater hose spacer * One 7 in. fuel line protective sleeve
( 2 )
$57.99
Trick Flow® TFX™ inline fuel filters keep fuel clean without restricting it--just what your high performance engine requires. The black anodized billet aluminum filters can handle up to 300 psi of fuel pressure and 1,000 hp. They come available with your choice of 10, 40, or 100-micron elements and with -6, -8, or -10 AN male inlet and outlet fittings.
( 14 )
$74.99
—
$88.99
With one of these phenolic spacers, you can increase pulling power and enhance throttle response without sacrificing drivability. In addition to improving power and throttle response, these spacers will also increase gas mileage. Each spacer includes all of the necessary gaskets and hardware for an easy installation.
( 3 )
$69.99
—
$79.99
Give your carburetor a little space with these Trick Flow® premium-grade 1 in. phenolic spacers. Designed to fit the contours of your carburetor, they will increase horsepower and torque in the mid-to-upper rpm range.
( 5 )
$69.99
If you've made serious engine mods to your 1986-97 EFI Mustang, then you'll need a fuel pump that can keep up. Luckily for you, these TFX™ in-tank fuel pumps from Trick Flow® are designed to do just that so your engine can run at full potential.
( 3 )
$114.99
These Trick Flow® stainless steel intake manifold bolt kits are 15 percent stronger than Grade 8 steel bolts and have a wide-area flange for better load distribution. They also have precision-rolled threads, which prevent galling and promote more consistent torque loading. Trick Flow® stainless steel intake manifold bolt kits are both corrosion and heat-resistant and come highly polished.
( 1 )
$62.99
—
$72.99
These Trick Flow® Box-R-Series Upper Intake Manifold Flange Plates are direct replacements for your Trick Flow intake manifold.
( 2 )
$79.99
These Trick Flow® Box-R-Series upper intake manifold hardware kits include all the hardware originally packaged with a Trick Flow® manifold. Kits include: * 4 ft. Viton® O-ring cord * Six 5/16-24 in. nuts * Six 5/16-24 in. x 2 in. studs * Ten 1/4-20 in. x 1 1/4 in. socket head cap screws * Thirteen 1/4-20 in. x 7/8 in. stainless steel button head screw * One box to upper flange gasket * One upper to lower manifold gasket
Not Yet Reviewed
$50.99
These Trick Flow® throttle cable brackets provide a place to mount throttle cables on 1986-93 5.0L Mustangs with either 75mm or 90mm race manifolds and no EGR plate. They feature a clear anodized finish and include gaskets and mounting hardware.
( 5 )
$67.99
These Trick Flow® steel intake manifold bolt kits have precision-rolled threads, which prevent galling and promote more consistent torque loading. Trick Flow® steel intake manifold bolt kits are heat-resistant and come in a chrome finish.
( 3 )
$60.99
Trick Flow® 5.0L R-Series EFI NOS hardware kits include the hardware that you need to run nitrous with your Trick Flow® manifold. Kits include: * Five 5/16-24NF 12 pt. nuts * Two 5/16-18 x 7 1/4 in. long chrome socket head cap screws * Two TFS R-Series upper/lower flange gaskets * Five 5/16 x 3 in. long studs
Not Yet Reviewed
$52.99
Trick Flow® TFX™ fuel injectors have so many features, it's no wonder that they are considered one of the best aftermarket injectors available! They atomize fuel better, resist clogging, are quieter, and require less energy to operate than other injectors. Low magnetic stainless steel bodies help prevent moisture contamination, and OEM-style clip grooves eliminate possible fuel leaks. Other features include electronically drilled and machined disc-type fuel control valves, improved nozzles and coil windings, and Viton® O-ring seals to prevent air leaks under extreme operating conditions. High-quality, 1/2 micron filter screens keep foreign debris and contaminants from entering the injectors to ensure proper performance and a long life cycle. TFX™ fuel injectors are 100 percent duty cycle tested to ensure reliability and performance. All flow values are at 3 bar (43.5 psi).
( 36 )
$74.99
—
$92.99
Trick Flow® solves your fuel injection conversion problems with these fuel injector harness adapter kits. Now you can make the change from smaller EV6 injectors to big EV1 injectors in your LS2 or L92 engine without having to cut a single thing. Each kit includes one adapter, O-ring, and spacer.
( 1 )
$95.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
