Availability
Get maximum performance out of your small block Ford with Trick Flow® R-Series intake manifolds. They deliver substantial power increases in the 3,500-7,500 plus rpm range on heavily modified street/strip and race engines. Plus, they're made from A319 aluminum for lighter weight, have integral bosses for nitrous or fuel injection nozzles, and extra material for custom porting. For use with square bore four barrel carbs.
( 8 )
$411.99
—
$416.99
Trick Flow® is no stranger to substantially improving airflow. These replacement EFI lower intake manifold bases are the foundation for Trick Flow's® high-horsepower aluminum EFI intake manifold kits. They're made from A319 aluminum and are computer-modeled to produce maximum torque and horsepower. The bases are available in several styles and finishes for Ford 5.0L, 351 Windsor, 4.6L 2V, 351C, and Clevor engines. Units must be used with corresponding Trick Flow® upper intake plenum.
( 8 )
$399.99
Trick Flow® TFX™ fuel injectors have so many features, it's no wonder that they are considered one of the best aftermarket injectors available! They atomize fuel better, resist clogging, are quieter, and require less energy to operate than other injectors. Low magnetic stainless steel bodies help prevent moisture contamination, and OEM-style clip grooves eliminate possible fuel leaks. Other features include electronically drilled and machined disc-type fuel control valves, improved nozzles and coil windings, and Viton® O-ring seals to prevent air leaks under extreme operating conditions. High-quality, 1/2 micron filter screens keep foreign debris and contaminants from entering the injectors to ensure proper performance and a long life cycle. TFX™ fuel injectors are 100 percent duty cycle tested to ensure reliability and performance. All flow values are at 3 bar (43.5 psi).
( 36 )
$76.99
—
$674.99
Trick Flow® Track Heat® EFI intake manifolds deliver a perfect balance of airflow distribution and velocity. The result is excellent low-end torque and superior horsepower from 1,500 to 6,500 rpm. These units are available in kits with a natural finish aluminum lower manifold and an aluminum upper plenum in your choice of silver powdercoat, black powdercoat, and natural finishes. The manifolds have a 75mm throttle body inlet and are designed for use on non-EGR engines. Additional features: * Small cross-section with 12.200 in. runners * Overall height to the upper manifold flange is 10.200 in. * Overall height to the lower manifold flange is 4.625 in. * 2.000 in. x 1.200 in. port size at head * 2.000 in. x 1.200 in. port size at mating flange The upper plenums and lower manifold are also available separately.
( 3 )
$888.99
—
$892.99
Trick Flow® replacement EFI upper intake plenums are computer-modeled to produce maximum torque and horsepower. The runner length and cross-sectional taper have been optimized to improve airflow throughout the rpm range—and the symmetrical, high-velocity ports distribute the air/fuel charge evenly to every cylinder. These A319 aluminum castings work well with nitrous and fit under most stock-height hoods for an easy bolt-on installation. They're available in several styles and finishes for Ford 5.0L, 351 Windsor, 4.6L 2V, 351C, and Clevor engines. The plenums must be used with corresponding Trick Flow® lower intake manifold base.
( 17 )
$449.99
—
$464.99
Old school looks, modern performance, and advanced manufacturing all rolled into one—Trick Flow's® R-Series Tunnel Wedge intake manifold for Ford 390-428 delivers just that. Part of the original Tunnel Wedge's cool factor was its appearance, so Trick Flow® took special care to match the looks of the legendary OEM version while improving upon its performance. Trick Flow® was able to maintain the original carburetor locations—but on the inside of the manifold, Trick Flow® overhauled the port design for more airflow and incorporated a new O-ring sealed bottom plate. Cast in premium-grade A319 aluminum, the manifold is topped with carb flanges machined for original Ford FE Tunnel Wedge-style square bore carburetors. Mounting hardware is included.
( 4 )
$999.99
These Trick Flow® TFX™ fuel rail kits come with everything you need to feed a high performance EFI engine--billet fuel rails, fittings, hoses, brackets, and a fuel pressure regulator. The regulator is adjustable from 40 to 70 psi for precise fuel delivery.
( 3 )
$813.99
These Trick Flow® TFX™ fuel rails are perfect when building a custom fuel system. The fuel rails are threaded for -8 AN fuel fittings. They also feature a black anodized finish that resists corrosion, and mounting brackets are included.
( 18 )
$242.99
—
$299.99
Trick Flow® R-Series intake manifolds for small block fords are designed for maximum power delivery on heavily modified street/strip and race engines that operate in the 3,500-7,500+ rpm range--right where it's needed the most. Vital features include A319 aluminum construction, integral bosses for nitrous or fuel injection nozzles, and extra material for custom port work. These carb-style EFI manifolds accept standard Bosch or Siemens-type fuel injectors. Overall height to the mounting pad is 6.300 in. (5.0L/302) or 6.450 in. (351 Windsor).
( 4 )
$462.99
—
$468.99
Turn up the heat up on big performance with Trick Flow® Track Heat® intake manifolds for your Ford 351C or Clevor. These single plane aluminum manifolds feature a high-rise, one-piece spider design and high-flowing individual extended runners for significantly more power in the 3,000-7,000 rpm range. Other features include OE 2V port locations and dimensions, a raised plenum floor for increased flow velocity and fuel atomization, integral bosses for nitrous or fuel injection nozzles, and extra material for custom porting. The manifolds will work in all 2V and 4V applications and with all square bore four barrel carbs.
( 8 )
$411.99
Trick Flow® R-Series A460 Intake Manifolds deliver significant performance gains in 500-plus cubic inch engines. They are single quad intake manifolds made from lightweight A319 aluminum and include bosses for nitrous or fuel injection. The special one-piece, spider-type design with high-flow, extended individual runners and a raised plenum floor produces sizeable power increases in the 3,500-8,000 rpm range. Additional highlights include extra material for custom porting and a Dominator-style carb mounting pad. R-Series A460 manifolds can only be used with Trick Flow® PowerPort® A460 series cylinder heads.
( 3 )
$749.99
Take the guesswork—along with meticulous work necessary for accurate port matching—out of dialing in your big cube engine build for huge power numbers with Trick Flow's R-Series 11R 227 port-matched intake manifold. The A319 aluminum manifold's CNC Competition Ported runner treatment has been specially designed and machined with perfect port alignment on Twisted Wedge® 11R 227 cylinder heads. The high-flow, one-piece spider-type single plane design with raised plenum floor puts the powerband in the 3,500-7,500-plus RPM range. Integral bosses allow adding nitrous nozzles. Accepts Holley 4150-style square bore carburetors.
Not Yet Reviewed
$674.99
Trick Flow® R-Series EFI Intake Manifolds deliver a perfect balance of airflow distribution and velocity. The result is excellent low-end torque and superior horsepower. The manifolds are available in kits with a natural finish aluminum lower manifold and an aluminum upper plenum in your choice of silver powdercoat, black powdercoat, and natural finishes. These manifold kits are designed for use on non-EGR engines. Manifolds for 5.0L engines with a 75mm throttle body inlet produce power in the 2,500-7,250 RPM range. Manifolds for 90mm throttle body applications produce power in the 3,000-7,750 RPM range. Additional features: *Large cross-section with 12.000 in. runners *Overall height to the upper manifold flange is 11.000 in. *Overall height to the lower manifold flange is 4.625 in. *2.000 in. x 1.200 in. port size at head *2.380 in. x 1.380 in. port size at mating flange The upper plenums and lower manifold are also available separately.
( 1 )
$859.99
Trick Flow® EFI heat spacer kits help you fit your spacer between the upper and lower intakes to create a heat flow barrier. That keeps the air in the upper intake cooler and denser. Plus, these CNC-machined phenolic spacers provide clearance for taller valve covers. They're available in 3/8 in. and 1 in. thick versions and include gaskets and longer mounting bolts.
( 89 )
$64.99
—
$174.99
Take the guesswork—along with meticulous work necessary for accurate port matching—out of dialing in your big cube engine build for huge power numbers with Trick Flow® R-Series 11R 205 port-matched carb-style EFI intake manifold. The A319 aluminum manifold's CNC Competition Ported runner treatment has been specially designed and machined with perfect port alignment on Twisted Wedge® 11R 205 cylinder heads. The high-flow, one-piece spider-type single plane design with raised plenum floor puts the powerband in the 3,500 to 7,500-plus rpm range. Custom-machined fuel injection nozzle ports accept standard Bosch and Siemens-type fuel injectors.
Not Yet Reviewed
$724.99
These aluminum adapters allow the use of a Trick Flow® EFI intake manifold on 1994-95 5.0L Mustangs.
( 17 )
$111.99
—
$119.99
These Trick Flow® throttle cable brackets provide a place to mount throttle cables on 1986-93 5.0L Mustangs with either 75mm or 90mm race manifolds and no EGR plate. They feature a clear anodized finish and include gaskets and mounting hardware.
( 5 )
$54.99
—
$67.99
Designed for engines that work in the 3,500-8,000 rpm range, Trick Flow® Track Heat® intake manifolds for your Ford 429/460 deliver race-like power and torque. These single plane high-rise manifolds feature a one-piece spider design, high-flow extended individual runners, a raised plenum floor for improved fuel atomization and flow velocity, integral bosses for nitrous or fuel injection nozzles, and extra material for custom porting. These Track Heat® manifolds are made from A319 aluminum and are for use with square bore four barrel carbs.
( 6 )
$699.99
These Trick Flow® stainless steel intake manifold bolt kits are 15 percent stronger than Grade 8 steel bolts and have a wide-area flange for better load distribution. They also have precision-rolled threads, which prevent galling and promote more consistent torque loading. Trick Flow® stainless steel intake manifold bolt kits are both corrosion and heat-resistant and come highly polished.
( 1 )
$41.99
—
$72.99
These Trick Flow® 4.6L Lower intake manifold hardware kits include all the hardware you need for your Trick Flow® manifold. Kits include: * Two socket head cap screws M8 x 1.25 x 75mm * Nine hex flange bolts M8 x 1.25 x 35mm * Two 3/8 NPT plugs * One gasket sheet TFS-51800002-G * Twelve hex flange bolts M6 x 1.0 x 25mm * Four #8 x 3/4 in. self tapping screws * Four zip ties * One hose barb C-rings * One 5/8 in. ID x 48 in. 90 degree coolant tube * One 12 in. black nylon hose protector * One 1 1/2 in. ID formed upper radiator hose extension * One 1 1/2 in. ID aluminum hose connector * One 12 in. 19/32 in. ID PCV hose (Romeo Engines)* * One 12 in. 11/32 in. ID PCV hose (Windsor Engines)* * Two 14 in. 1/4 in. fuel injection hoses * Four fuel injection hose clamps * Two thermal hose protectors * Two 5/8 in. hose clamps * Two 1 1/2 in. hose clamps * One 1/2 NPT x 3/4 in. barb fitting * One EGR extension tube * One 5/8 in. 90 degree steel compression fitting * Two hex flange bolts M8 x 1.25 x 20mm * Two M8 flat washers * One alternator relocation kit TFS-5182ALTR
Not Yet Reviewed
$234.99
These Trick Flow® Box-R-Series Upper Intake Manifold Flange Plates are direct replacements for your Trick Flow intake manifold.
( 2 )
$79.99
These Trick Flow® Box-R-Series upper intake manifold hardware kits include all the hardware originally packaged with a Trick Flow® manifold. Kits include: * 4 ft. Viton® O-ring cord * Six 5/16-24 in. nuts * Six 5/16-24 in. x 2 in. studs * Ten 1/4-20 in. x 1 1/4 in. socket head cap screws * Thirteen 1/4-20 in. x 7/8 in. stainless steel button head screw * One box to upper flange gasket * One upper to lower manifold gasket
Not Yet Reviewed
$50.99
If you've made serious engine mods to your 1986-97 EFI Mustang, then you'll need a fuel pump that can keep up. Luckily for you, these TFX™ in-tank fuel pumps from Trick Flow® are designed to do just that so your engine can run at full potential.
( 3 )
$114.99
—
$230.99
These Trick Flow® steel intake manifold bolt kits have precision-rolled threads, which prevent galling and promote more consistent torque loading. Trick Flow® steel intake manifold bolt kits are heat-resistant and come in a chrome finish.
( 3 )
$15.99
—
$60.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
