Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
Trail-Gear FJ-80 Knuckle Rebuild Kits
Trail-Gear FJ-80 knuckle rebuild kits are available with or without wheel bearings. The kits contain all of the replacement parts you need to service your steering knuckles. Trail-Gear FJ80 knuckle kits will service both left and right knuckles. Trail-Gear FJ-80 knuckle rebuild kits typically include: * Gaskets, felts, seals, washers and shims * Inner axle seals and outer felt covers
( 6 )
$129.99
—
$199.99
Trail-Gear Knuckle Rebuild Kits
Has it been a while since you serviced your knuckles? Trail-Gear knuckle rebuild kits contain all standard replacement parts, including gaskets, felts, seals, washers, and shims to do the job done right. They even include outer felt covers--a Trail-Gear exclusive! If you're using your truck in the rocks you will want to replace these covers when you service the knuckles. Kits are offered with or without wheel bearings. Service your knuckles with Trail-Gear knuckle rebuild kits.
( 4 )
$149.00
—
$159.76
Trail-Gear Rock Assault Ram Steering Assist Kits
Truck owners are very impressed by the lineup of Trail-Gear Rock Assault Ram steering assist kits. For example, the Toyota kits feature a selection of various-sized stroke hydraulic rams--with high-temperature inner and outer seals for long life and no leaks. Each ram includes a 3/4 in. rod that's a full 50 percent stronger than other rods on the market. The specially formed 1/4 in. heavy-duty plate steel brackets make installation a snap. Here are the parts included in most Trail-Gear Rock Assault Ram steering assist kits: * Ram with high-temperature inner and outer seals * Rod ends with jam nut * Ram bracket for axle housing * Ram bracket for tie rod * Two hoses * Two JIC 90 degree elbows * Two 1/4 in. NPT x #6 JIC steering box fittings * Mounting hardware * Instructions with photos These kits do require: * Trail-Gear High Steer crossover steering with 1.25 in. tie rod * Tapped steering box
( 3 )
$449.99
Trail-Gear Toyota High Steer Kits
Trail-Gear Toyota high steer kits feature unbeatable quality at an attractive price. Crossover steering is critical for rock crawling. The stock steering just can't keep pace with today's super-flexible suspension systems. This results in broken stock steering arms and loss of steering. These kits include super-beefy, solid forged steering arms, a heavy-duty pitman arm, heavy-duty 0.250 in. wall steering rods, and rod ends. The kits are precision-fit for easy assembly.
( 3 )
$549.99
—
$749.99
Trail-Gear Hydraulic Smooth Body Bump Stops
Whether you are hitting the trail, or ripping through the desert, Trail-Gear Performance bump stops will allow you to get the most out of your vehicles suspension by eliminating harsh bottom outs. Offered in 2 in. and 2.5 in. body diameters, the 2.5 in. models will absorb more impact energy and are recommended by Trail Gear for vehicles over 5,000 lbs. or trucks with highly leveraged A-arms or trailing arms. Of course, both sizes are sure to improve your overall off-road experience. Trail-Gear Hydraulic smooth body bump stops are fully rebuildable, easily tunable through the Schrader valve on top, and TG's unique automatic velocity sensitive valving technology saves you time by eliminating the need to adjust shim packs. The bump stops also help prevent damage from occurring to expensive shocks and suspension components by absorbing impacts at full suspension compression. Trail-Gear smooth body, pin top bump stops are available in 2 in., 3 in., and 4 in. travel options, and can be purchased individually or in sets that will also include four 1/4 in. thick ASTM A36 steel weld-on universal mounting brackets. Choose the size, stroke, and quantity desired for your vehicle. Hydraulic bump stop details and benefits: * Zinc-Plated SAE 1020 steel body * Hard chromed SAE 1045 steel rod * 6061 T-6 aluminum seal housing with dual PTFE coated bronze rod guides * Viton® O-ring with U-cup seal * 6061 T-6 aluminum piston * Automatic velocity sensing valve * Anodized 6061 T-6 aluminum end cap with polyurethane wiper seal * Replaceable Delrin® contact pad for smooth and quiet operation * Tunable by adjusting the nitrogen pressure and or oil volume * Schrader valve with machined aluminum cap for quick and easy pressure adjustment * Zinc-plated steel locking nut * Adjustable from 75 to 300 psi; ships pre-charged to 200 psi--a great starting point for tuning your suspension
Not Yet Reviewed
$399.99
Trail-Gear Pitman Arms
Trail-Gear pitman arms are designed from solid forged steel construction, and are ideal for use with crossover steering. Replacing your pitman arm is recommended if the original is worn-out or, in most cases, if your steering box is being changed out. These strong, extra-wide one-piece arms will allow the use of FJ80 tie rod ends. They're available in flat style or with the same drop as the factory pitman arm.
( 2 )
$129.99
Trail-Gear Power Steering Pumps
Providing improved power steering for off-roading, Trail-Gear power steering pumps replace your stock models with high-performance reliability. Their TC-style pumps are built to handle extreme heat, with each one receiving a bench test to ensure quality. They are available in two styles -with or without an anodized aluminum pulley. When you are on the road, stock is okay--but for off-road, you need trail-tested gear. Order the Trail-Gear power steering pumps best suited for your application.
( 6 )
$399.99
—
$899.99
Trail-Gear Heavy-Duty Steering Kits
Trail-Gear heavy-duty steering kits solve feedback issues caused through the stock steering setup. Bigger tires and a lifted suspension are necessities for off-roading today—unfortunately, the combination can cause problems. TG kits will reduce steering vibrations, so you can enjoy a more comfortable driving experience. They offer kits for multiple applications that will strengthen your setup for more assurance on the trails. Trail-Gear steering kits include right and left-hand thread heavy-duty FJ80 tie rod ends, drag link, and hardware. The tie rods and drag link are made from hefty 1/4 in. thick wall DOM tubing. Your choice of kit may also include steering stabilizer with 9 in. stroke and hardware, or a hard-to-find 1:10 taper reamer for reaming out your stock pitman arm and steering arms.
( 1 )
$299.99
—
$399.99
Trail-Gear Samurai High Steer Kits
Trail-Gear Samurai high steer kits are specifically engineered to work with stock Samurai axles--and they're a must-have for a "spring over axle" setup. They include solid-forged 8620 steel steering arms, a heavy-duty 1 1/4 in. x .250 in. wall DOM drag link and tie rod, FJ80 tie rod ends, and all necessary hardware. There's even a hard-to-find 1:10 taper reamer for reaming out your stock pitman arm. As with all Trail-Gear products, installation is easy, and these high steer kits fit all Suzuki Samurai engines.
( 4 )
$599.99
Trail-Gear Rock Assault Double-Ended Ram Kits
Through years of research, development, and testing Trail-Gear has developed these Rock Assault double-ended ram kits—to meet the tough demands of top-level rock crawling competitors and the toughest trails in the world. Most rams on the market only have one rod seal. Trail-Gear started with the primary and secondary rod seal to insure that fluid leakage would never be an issue. They also included two wiper seals in the design to ensure that dirt and debris stays on the trail—and doesn't invade your steering system. In addition, the ram was designed with a triple-lip piston seal for consistent steering with no drift or fluid bypassing the piston. In true Trail-Gear style, the Rock Assault kits are engineered to be the strongest on the market, so they're designed with a piston wear band and a rod bushing. This bushing allows the rod to absorb much higher side loads. The piston shaft is machined from a single piece of 4340 chromoly. Trail-Gear Rock Assault double-ended ram kits are available with a 6, 8, or 10 in. stroke. The cylinder has a black zinc plated finish, while the rod has 3/4-16 in. female threads on each end.
Not Yet Reviewed
$649.99
Trail-Gear Bomb Proof Engine Mount Kits
Got a broken OE rubber motor mount? Trail-Gear Bomb Proof engine mount kits offer the quality and strength you need. The base of these motor mounts is made from 1/4 in. plate. The surface plate that the motor sits on is made out of 3/8 in. material and has a Class 10.9 bolt that is mechanically locked to the engine mount plate--not just threaded in. Bomb Proof mounts are given a silver zinc plating that looks sharp and will last a lifetime. The bushings are made out of high-grade polyurethane for added durability, and the mount holes are slotted so that your install is easy. Upgrade your vehicle to Trail-Gear Bomb Proof engine mount kits.
( 9 )
$189.99
Trail-Gear Leaf Spring Shackles
If you need to relocate your rear shackle mounts in order to install longer suspension springs, it's the perfect time to upgrade to Trail-Gear leaf spring shackles. These 1/4 in. steel plate units are stronger than the original factory shackles, offering more security when scaling rough terrain. Trail-Gear leaf spring shackles will use your OEM bushings or stock replacements. Order the pair designed for your vehicle application.
( 5 )
$129.99
Trail-Gear Hydraulic Threaded Body Bump Stops
Whether you are hitting the trail, or ripping through the desert, Trail-Gear Performance bump stops will allow you to get the most out of your vehicles suspension by eliminating harsh bottom outs. Offered in 2 in. and 2.5 in. body diameters, the 2.5 in. models will absorb more impact energy and are recommended by Trail Gear for vehicles over 5,000 lbs. or trucks with highly leveraged A-arms or trailing arms. Of course, both sizes are sure to improve your overall off-road experience. Trail-Gear Hydraulic threaded body bump stops have anodized aluminum locking rings for quick and easy adjustment. They are fully rebuildable, easily tunable through the Schrader valve, and TG's unique automatic velocity sensitive valving technology saves you time by eliminating the need to adjust shim packs. The bump stops also help prevent damage from occurring to expensive shocks and suspension components by absorbing impacts at full suspension compression. Trail-Gear threaded body bump stops are available in 2 in., 3 in., and 4 in. travel options, and can be purchased individually or in sets that will also include four 1/4 in. thick ASTM A36 steel weld-on universal mounting brackets and spanner wrench. Choose the size, stroke, and quantity desired for your vehicle. Hydraulic bump stop details and benefits: * Zinc-Plated SAE 1020 steel body * Hard chromed SAE 1045 steel rod * 6061 T-6 aluminum seal housing with dual PTFE coated bronze rod guides * Viton® O-ring with U-cup seal * 6061 T-6 aluminum piston * Automatic velocity sensing valve * Anodized 6061 T-6 aluminum end cap with polyurethane wiper seal * Replaceable Delrin® contact pad for smooth and quiet operation * Tunable by adjusting the nitrogen pressure and or oil volume * Schrader valve with cap for quick and easy pressure adjustment * Adjustable from 75 to 300 psi; ships pre-charged to 200 psi--a great starting point for tuning your suspension
Not Yet Reviewed
$199.99
—
$399.99
Trail-Gear Universal Shock Hoop Kits
Trail-Gear universal shock hoop kits are long enough to accommodate extended-length shocks. They're made from 1035 DOM and precision CNC-bent to ensure the highest quality product. The shock hoops are available in different sizes for fitment on specific applications. A universal model measures 16 in. from top to bottom, and 13 in. from the weldment mounting surface to the shock eye bracket.
( 6 )
$99.99
Trail-Gear Universal Heavy-Duty Hydro Assist Ram Kits
Trail-Gear universal heavy-duty hydro assist ram kits feature a heavy-duty single-ended hydraulic ram in your choice of 6 in. or 8 in. stroke. Trail-Gear's specially designed ram features a 1 1/8 in. rod for maximum strength and a 2 1/4 in. diameter bore for maximum steering force. The provided mounting brackets in kit have fitments made from 1/4 in. thick-formed steel. The specially formed brackets fit most applications to make installation a breeze, however, do take note some applications may require additional cutting and/or grinding. Hardware, JIC hoses, and steering box fittings are included. Trail-Gear recommends a 6 in. stroke for most Toyota applications and a 8 in. stroke for Dana applications. Important Note: Use only standard power steering fluid with this product. The use of ATF fluid, semi-synthetic fluid, or full synthetic fluid not recommended and void the warranty. Additional components required: high steer kit, steering box drilled and tapped for hydro assist.
( 1 )
$449.99
Trail-Gear Leaf Spring Perches
Lift kits and taller tires are a necessity when navigating serious off-road trails. Whether you need to make adjustments to pinion angles or tire fitment in the fender wells, Trail-Gear leaf spring perches have you covered. These 1/4 in. steel perches feature the standard center hole, with additional holes drilled 1 in. in front and behind the center to avoid crunching fender well sheet metal. When running longer rear springs for greater flex, you may need to move the axle forward—while larger tires with stock length springs sometimes hit the front, requiring the axle to be moved back. If you're adding a larger lift, it's advised to change the angle of the perches in order to set proper pinion angles. Properly mounted lift kits and taller tires can greatly improve your vehicle's off-road capabilities, but steep driveline angles and tires hitting the edges of fender wells will bring nothing but trouble. Give your vehicle many options with Trail-Gear leaf spring perches.
( 7 )
$39.99
Trail-Gear Double-Shear Brackets
Trail-Gear double-shear brackets are made from 1/8 in. thick 4130 chromoly steel for fabrication strength. They're designed for double-shear mounting limit straps or seat belt tabs. The brackets are sized to mount a 1/2 in. bolt and require welding for mounting on your vehicle.
( 4 )
$9.99
Trail-Gear Heavy-Duty Transfer Case Mounts
Trail-Gear heavy-duty transfer case mounts can handle the abuse of rock crawling and the ultra-low torque of dual cases. Stamped out of 1/4 in. thick steel plate and then welded on a jig to ensure the best fit possible, these mounts are fitted with polyurethane bushings and coated with zinc for lasting performance and durability. Eliminate the worries of a busted T-case mount on the trails with the installation of bomb-proof Trail-Gear heavy-duty transfer case mounts.
( 5 )
$59.99
—
$149.99
Trail-Gear FJ-80 Tie Rod Ends
Off-roading can be such an adrenaline rush! Unfortunately, it can also take its toll on your vehicle's suspension. No worries, Trail-Gear heavy-duty FJ-80 tie rod ends are available in right-hand threaded and left-hand threaded applications to keep your suspension fine-tuned for trail blazing action. They're greased to ensure the flow of lubrication throughout the part and are sealed to keep out dirt. A cotter pin and jam nut are included. Get the most out of your off-road experience with Trail-Gear suspension parts!
( 4 )
$29.99
Trail-Gear Creeper Joints
Trail-Gear creeper joints can take years of punishment! The outer shell of these these joints is a single forged steel piece. The inner flex ball is 8620 tool steel, the washers are heavy-duty hardened steel, and the bushings are polyurethane. TG provides a threaded grease fitting on top and a drilled flex ball for better lubrication; plus, each joint includes a jam nut. Choose from the selection of Trail-Gear Creeper joints to build your flex suspension.
( 4 )
$49.99
—
$129.99
Trail-Gear IFS Steering Box Mounting Kits
If you're installing crossover steering, the time you'll save with one of these mounting kits is well worth the investment. They make swapping to the Trail-Gear IFS steering box much easier. The heavy-duty kits feature 3/16 in. inner and 1/4 in. outer frame reinforcing plates, with angled leading and trailing edges to avoid frame cracking. You'll also receive Grade 8 bolts, crimp nuts, and dependable DOM tubing to complete the project.
( 3 )
$89.99
Trail-Gear Shock Mounts
Mount up and hit the trails with Trail-Gear front or rear lower shock mounts. They're ideal for use on a straight axle swap and are made of thick 3/16 in. plate steel. The curved bottoms weld directly to the axle housing, horizontally or vertically, with 1/2 in. mounting holes.
( 6 )
$19.99
—
$129.99
Trail-Gear Rock Defense Dual T-Case Crossmembers
Specifically designed for Toyota Tacoma trucks, the Trail-Gear Rock Defense dual T-case crossmembers provide a sturdy secure transfer case mount, while also providing superior transfer case protection while sliding across any rocks your vehicle can tackle. The Rock Defense T-case crossmembers are made from 3/8 in. thick 1010 steel, so you have confidence that your transfer case is supported and covered when you are sliding over even the nastiest rocks. These crossmember kits can be mounted either by drilling the frame and bolting the crossmember in, or simply by welding the crossmember mounting brackets to the frame and bolting the crossmember to the mounting brackets. Trail-Gear also offers single transfer case crossmember kits. Both dual case and single case crossmembers use the same mounting brackets, so that once you have your single case brackets installed, there is no need to change them when upgrading to dual cases. You simply bolt dual case crossmember into the same bracket, all that is needed is an additional T-case mount. Features and benefits: * Fits 1995-2004 Tacoma T-cases, automatic and manual transmissions, and uses your stock T-case mount(s) * Rock Defense T-case crossmember kits can be mounted either by drilling the frame and bolting the crossmember in, or simply by welding the crossmember mounting brackets to the frame and bolting the crossmember to the mounting brackets * Supplied mounting brackets are 1/4 in. thick 1010 steel and all necessary Grade 8 mounting hardware is included with top locking nuts * Both single and dual case crossmembers use the same mounting brackets, so that once you have your single case brackets installed, there is no need to change them when you upgrade to dual cases—simply bolt the dual case crossmember into the same bracket, all that is needed is an additional T-case mount (sold separately) * Crossmembers are shipped unpainted and should be painted or powdercoated before being installed
Not Yet Reviewed
$399.99
Trail-Gear Super Flex Front Leaf Springs
Now available with a heavy-duty 25 percent higher spring rate, Trail-Gear Super Flex front leaf springs are perfect for heavier trucks and 4Runners that need that extra strength for the trail. They are also great for V6 and V8 engine swaps. Remember, if you install a heavier engine, it may be a good idea to improve your suspension. Otherwise, it's like asking your ride to do the same trail while overloaded with weight. It may get you to the trail faster, but those hills and terrain may just be too much for it to run that chassis and engine over. With these Trail-Gear Super Flex springs engineered to hold their arch and lift longer, your ride will be able to handle the weight and the trail.
( 3 )
$599.99
