Availability
Trail-Gear FJ-80 knuckle rebuild kits are available with or without wheel bearings. The kits contain all of the replacement parts you need to service your steering knuckles. Trail-Gear FJ80 knuckle kits will service both left and right knuckles. Trail-Gear FJ-80 knuckle rebuild kits typically include: * Gaskets, felts, seals, washers and shims * Inner axle seals and outer felt covers
( 5 )
$129.99
—
$199.99
Trail-Gear Power Flow power steering pump upgrade kits remedy a common flaw in Toyota trucks. The stock pump is just barely able to supply the volume and pressure needed to run hydraulic-assist steering—putting out 1,300 psi at only one gallon per minute. The original pump is not able to provide enough fluid to run both the stock steering and the demands of a ram, especially at low rpm. Drilling out the restrictor plates in a stock pump for more volume often leads to pump failure. The answer is a replacement "TC" style pump. This provides the full fluid volume your steering box and ram are looking for, even at idle. These kits include a 1,650 psi pump, pump bracket, reservoir, reservoir bracket, belt, fittings, hoses, and hardware. The pump kits are designed to work with stock or ram drilled IFS power steering boxes. Additional notes: * The pump and bracket are designed to fit all Toyota 4-cylinder 4WD motors from 1979-95 * A large power steering fluid cooler (included) is required on the low-pressure side of the system * Pump bracket works in conjunction with stock idler bracket * If your truck is not currently equipped with power steering, you will need to purchase the idler bracket and replace the steering gearbox with one designed for use with power steering * The stock fan belt will not work with this pump and will need to be replaced with a Napa 9430 belt. Belt is included with kit. * Note: Never use ATF fluid or a semi-synthetic blend. This will void the warranty. It's okay to use standard power steering fluid or a full synthetic.
( 2 )
$899.99
Looking for a steering box for your Toyota's steering system? Trail-Gear IFS remanufactured steering boxes are thoroughly flushed and rebuilt. All boxes are completely tested before shipping.
( 3 )
$699.99
Has it been a while since you serviced your knuckles? Trail-Gear knuckle rebuild kits contain all standard replacement parts, including gaskets, felts, seals, washers, and shims to do the job done right. They even include outer felt covers--a Trail-Gear exclusive! If you're using your truck in the rocks you will want to replace these covers when you service the knuckles. Kits are offered with or without wheel bearings. Service your knuckles with Trail-Gear knuckle rebuild kits.
( 4 )
$149.99
—
$199.99
Trail-Gear heavy-duty transfer case mounts can handle the abuse of rock crawling and the ultra-low torque of dual cases. Stamped out of 1/4 in. thick steel plate and then welded on a jig to ensure the best fit possible, these mounts are fitted with polyurethane bushings and coated with zinc for lasting performance and durability. Eliminate the worries of a busted T-case mount on the trails with the installation of bomb-proof Trail-Gear heavy-duty transfer case mounts.
( 5 )
$149.99
After years of development and testing, Trail-Gear fully loaded Six Shooter kits have set a new standard for Toyota knuckle strength and reliability. They totally eliminate the problem of broken steering knuckles and studs. The addition of two studs in each arm effectively prevents the steering arm from becoming loose or shearing off the studs under extreme loads. The knuckle housing was designed with thicker-than-stock material, and larger gussets have been added around the outside of the knuckle for extra strength. Precision CNC-machined, each set of knuckles and steering arms are inspected and tested for the highest quality of products that Trail-Gear can deliver. These kits include a special 6-hole shim pack for use between the top of the knuckle and the steering arm assembly. A minimum of four additional steering arm studs are required for installation.
( 3 )
$499.99
—
$699.99
Trail-Gear solid axle steering kits support your determination to put together your own SAS kit to lift your first-generation Tacoma. How, you ask? When you have trouble finding the right parts to link your steering to an IFS steering box, you know the answer--Trail-Gear. These TG solid axle kits utilize the same steering parts from their own SAS kits to take the guesswork out of making your own steering linkage. You'll receive an adjustable-length double-D steering shaft, a firewall plate, a steering shaft seal, and U-joints for both ends of the shaft. Trail-Gear is ready to lend a hand with their solid axle steering kits.
Not Yet Reviewed
$379.99
Trail-Gear pitman arms are designed from solid forged steel construction, and are ideal for use with crossover steering. Replacing your pitman arm is recommended if the original is worn-out or, in most cases, if your steering box is being changed out. These strong, extra-wide one-piece arms will allow the use of FJ80 tie rod ends. They're available in flat style or with the same drop as the factory pitman arm.
( 1 )
$129.99
Got a broken OE rubber motor mount? Trail-Gear Bomb Proof engine mount kits offer the quality and strength you need. The base of these motor mounts is made from 1/4 in. plate. The surface plate that the motor sits on is made out of 3/8 in. material and has a Class 10.9 bolt that is mechanically locked to the engine mount plate--not just threaded in. Bomb Proof mounts are given a silver zinc plating that looks sharp and will last a lifetime. The bushings are made out of high-grade polyurethane for added durability, and the mount holes are slotted so that your install is easy. Upgrade your vehicle to Trail-Gear Bomb Proof engine mount kits.
( 9 )
$189.99
Truck owners are very impressed by the lineup of Trail-Gear Rock Assault Ram steering assist kits. For example, the Toyota kits feature a selection of various-sized stroke hydraulic rams--with high-temperature inner and outer seals for long life and no leaks. Each ram includes a 3/4 in. rod that's a full 50 percent stronger than other rods on the market. The specially formed 1/4 in. heavy-duty plate steel brackets make installation a snap. Here are the parts included in most Trail-Gear Rock Assault Ram steering assist kits: * Ram with high-temperature inner and outer seals * Rod ends with jam nut * Ram bracket for axle housing * Ram bracket for tie rod * Two hoses * Two JIC 90 degree elbows * Two 1/4 in. NPT x #6 JIC steering box fittings * Mounting hardware * Instructions with photos These kits do require: * Trail-Gear High Steer crossover steering with 1.25 in. tie rod * Tapped steering box
( 3 )
$449.99
Trail-Gear heavy-duty steering kits solve feedback issues caused through the stock steering setup. Bigger tires and a lifted suspension are necessities for off-roading today—unfortunately, the combination can cause problems. TG kits will reduce steering vibrations, so you can enjoy a more comfortable driving experience. They offer kits for multiple applications that will strengthen your setup for more assurance on the trails. Trail-Gear steering kits include right and left-hand thread heavy-duty FJ80 tie rod ends, drag link, and hardware. The tie rods and drag link are made from hefty 1/4 in. thick wall DOM tubing. Your choice of kit may also include steering stabilizer with 9 in. stroke and hardware, or a hard-to-find 1:10 taper reamer for reaming out your stock pitman arm and steering arms.
Not Yet Reviewed
$399.99
Providing improved power steering for off-roading, Trail-Gear power steering pumps replace your stock models with high-performance reliability. Their TC-style pumps are built to handle extreme heat, with each one receiving a bench test to ensure quality. They are available in two styles -with or without an anodized aluminum pulley. When you are on the road, stock is okay--but for off-road, you need trail-tested gear. Order the Trail-Gear power steering pumps best suited for your application.
( 6 )
$399.99
—
$899.99
With all of the choices on the market for solid axle conversion, you're probably wondering what makes Trail-Gear IFS Eliminator kits stand out? These kits contain the highest quality and most complete parts roster at an affordable price. Plus, Trail-Gear offers the package in three different ride heights! Kits include: * Front leaf springs (your choice of 3, 4, or 5 in. spring) * High Steer crossover steering kit * Front drop hanger with greasable bolts * Greasable 5 in. shackles * Frame tubes and jigs * Steering stabilizer kit * U-bolt flip kit * (2) Shock hoops * (2) Bilstein shocks * (2) Front brake lines * (2) Vented rotors * (2) Bump stop extensions * (2) Wheel spacers * (2) Bump stops * Front axle gusset * Axle diff armor * Knuckle service kit * Wheel bearing kit * Motor mount cover plates * Spring pad * Instructions
( 1 )
$1,799.99
If you're installing crossover steering, the time you'll save with one of these mounting kits is well worth the investment. They make swapping to the Trail-Gear IFS steering box much easier. The heavy-duty kits feature 3/16 in. inner and 1/4 in. outer frame reinforcing plates, with angled leading and trailing edges to avoid frame cracking. You'll also receive Grade 8 bolts, crimp nuts, and dependable DOM tubing to complete the project.
( 3 )
$89.99
If you need to relocate your rear shackle mounts in order to install longer suspension springs, it's the perfect time to upgrade to Trail-Gear leaf spring shackles. These 1/4 in. steel plate units are stronger than the original factory shackles, offering more security when scaling rough terrain. Trail-Gear leaf spring shackles will use your OEM bushings or stock replacements. Order the pair designed for your vehicle application.
( 5 )
$129.99
Trail-Gear leaf spring shackle and hanger kits make it easy to install shackle tubes in your frame. Kit includes frame tubes, tube jigs, offset hanger with gussets, and offset shackles. Trail Gear specializes in suspension and off-road products.
( 5 )
$199.99
—
$279.99
Trail-Gear Classic rear lift kits feature long-travel springs and shocks for super flexibility on the trail. They include welded rear spring hangers, greasable rear shackles, shock mounts, U-bolt flip kit, extended brake line, spring perches, and instructions. Best of all, you get a pair of Bilstein shocks for use with all of the increased lift height.
( 1 )
$899.99
Tired of getting hung-up? It only takes one instance of entanglement to fully appreciate what Trail-Gear U-bolt flip kits can deliver: escapability and better protection from damage! These simple add-on accessories provide better under-vehicle allowance when you head off-road or anywhere with obstacles to cross. The steel U-bolts are installed under each axle to allow you to just slide over rocks and debris. Trail-Gear kits contain two flip plates and four 9/16 in. bolts with nuts and washers. Front kits will allow for spring packs up to 2 in. thick, and rear kits will fit spring packs up to 2.5 in. thick.
( 8 )
$89.99
Better than rubber, Trail-Gear leaf spring shackle bushings are made from hard-working polyurethane. Designed to fit inside the frame tube and the rear shackle mounts, these bushings will resist the twisting forces of your suspension. Don't just replace; upgrade your OE bushings to Trail-Gear leaf spring shackle bushings.
Not Yet Reviewed
$6.99
Trail-Gear high steer crossover steering kits get you have you crawling over the rocks in no time. Stock steering just can't do the job like flexible crossover steering. TG high steer kits outfit your rig with the unbeatable quality of super beefy, solid forged steering arms, a heavy-duty pitman arm, rod ends, and durable .250 in. wall steering rods. They offer a precision fit for easy assembly and are available with flat arm or drop pitman arm, and 4-stud or 6-stud setups. Is your steering wheel on the right? TG also offers a right hand drive! If you're tired of broken stock steering arms, make the switch to Trail-Gear high steer crossover kits.
( 1 )
$549.99
—
$649.99
Easy to install and tough as nails, Trail-Gear leaf spring hangers will allow you to move the hangers on the frame and install longer springs. Front and rear hangers are available to make this upgrade optimal. They will be much stronger than your stock hangers.
( 7 )
$39.99
—
$149.99
Trail-Gear universal shock hoop kits are long enough to accommodate extended-length shocks. They're made from 1035 DOM and precision CNC-bent to ensure the highest quality product. The shock hoops are available in different sizes for fitment on specific applications. A universal model measures 16 in. from top to bottom, and 13 in. from the weldment mounting surface to the shock eye bracket.
( 6 )
$99.99
Mount up and hit the trails with Trail-Gear front or rear lower shock mounts. They're ideal for use on a straight axle swap and are made of thick 3/16 in. plate steel. The curved bottoms weld directly to the axle housing, horizontally or vertically, with 1/2 in. mounting holes.
( 6 )
$39.99
Off-roading can be such an adrenaline rush! Unfortunately, it can also take its toll on your vehicle's suspension. No worries, Trail-Gear heavy-duty FJ-80 tie rod ends are available in right-hand threaded and left-hand threaded applications to keep your suspension fine-tuned for trail blazing action. They're greased to ensure the flow of lubrication throughout the part and are sealed to keep out dirt. A cotter pin and jam nut are included. Get the most out of your off-road experience with Trail-Gear suspension parts!
( 4 )
$29.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
