Availability
TeraFlex ball joints can help keep your Jeep's off-road integrity intact! Engineered to perform under heavy stresses with excellent wear, these replacement ball joint kits easily handle the increased load caused by oversized tires and offset wheels. The upper ball joints incorporate hard sintered wear bushings to endure extreme side load demands without failure; while the lower ball joints feature a threaded top cap for adjustable preload—and allow grease servicing without axle shaft removal. TeraFlex ball joints feature carbon steel housing with magnesium phosphate coated assembly, plus chromoly ball/stud with magnesium phosphate anti-corrosion coating. For easy maintenance, the TeraFlex ball joints include grease zerks.
( 7 )
$303.72
—
$338.99
TeraFlex front adjustable track bars locate the axle side-to-side in the vehicle. They're designed to raise and lower with the suspension movement in an arc that matches the arc of the drag link. These track bars can be adjusted to achieve that optimum angle to maximize suspension travel and efficiency. They'll also eliminate bump steer problems without the need of drilling any holes. When you're ready to lift your vehicle, TeraFlex front adjustable track bars will eliminate any steering or suspension travel issues that may occur. Order the model recommended for your Jeep application.
( 7 )
$293.99
—
$370.99
TeraFlex Falcon Nexus EF 2.2 Fast Adjust steering stabilizers offer a wide range of adjustability with a 3-position fast adjust knob featuring soft, medium, and firm settings. These Jeep-specific steering stabilizers deliver a properly weighted steering feel and consistent bi-directional turning for balanced and controlled side-to-side steering response and an equal return to center dynamics. Built from the ground up with a focus on fitment and function, these Wrangler-specific Falcon Nexus EF (Equal Force) steering stabilizers deliver the best damping characteristics possible.
Not Yet Reviewed
$385.01
TeraFlex NP231 short shaft kits, or slip yoke eliminators, with new heavy-duty shafts, are engineered to withstand the 50 percent increase in torque generated by the extreme reduction of the Tera Low231 gears. These kits also eliminate the need to lower the transfer case in most cases by increasing the rear driveshaft length by 4 in. They include a larger output bearing and rear housing.
( 1 )
$436.97
TeraFlex Jeep JL/JT Dana 30/44 heavy-duty ball joints are designed to fit all JL Wrangler/Unlimited and JT Gladiator models with Dana 30 or Dana 44 front axles. These heavy-duty ball joints are engineered to handle the increased load caused by oversized tires and offset wheels. Whether you want to restore your stock chassis to like-new performance or you're looking to improve upon the factory design, TeraFlex has got the right upper and lower ball joints to replace your worn out, damaged, or inferior ball joints.
( 3 )
$324.26
TeraFlex designed and developed these exceptional VSS shock absorbers specifically for Jeep vehicles, giving you extreme off-road performance and an unequaled highway ride. They feature premium-quality rubber bushings with Jeep-specific bar pins and a resistant black finish that withstands the most extreme off-road abuse. The VSS gas shocks use a twin-tube design, and a special shock boot protects the triple-chromed rod to ensure extended, trouble-free operation.
( 1 )
$409.99
TeraFlex coil springs will outperform your stock springs. Unlike stock springs, they are designed with the addition of aftermarket components in mind. After all, what Jeep owner doesn't add winches, bumpers, and larger tires to their rigs to make them more invincible? Choose coil springs made with you and your Jeep in mind--TeraFlex coil springs.
( 3 )
$265.57
—
$382.99
TeraFlex developed these exceptional VSS shocks specifically for Jeep vehicles, giving you extreme off-road performance and an unequaled highway ride. They feature premium-quality rubber bushings with Jeep-specific bar pins and a resistant black finish that withstands the most extreme off-road abuse. The VSS gas shocks use a twin-tube design, and a special shock boot protects the triple-chromed rod to ensure extended, trouble-free operation.
Not Yet Reviewed
$330.99
—
$409.99
TeraFlex Alpine FlexArms provide maximum adjustability, dependability, and performance, while retaining the factory control arm mounting locations. Alpine FlexArms can be added to your existing suspension lift. Features and benefits include: * Durable 1 5/8 in. x 0.157 in. tube provides maximum strength * Recenters axles in the wheel well for proper suspension movement or can be used to increase wheelbase * High-quality factory-style bushings provide excellent noise, vibration, and harshness (NHV) damping and ride-quality characteristics with zero maintenance * Premium black e-dipped coating provides superior durability and corrosion resistance on tube and forged rod end housing * Anodized 6061 T-6 aluminum clamp collar to secure rod end after length adjustment
( 1 )
$278.99
—
$554.99
TeraFlex SpeedBumps are an innovative composite hydraulic bump stop system designed for high-speed performance. The maintenance-free, performance-tuned microcellular polyurethane technology provides a simple installation with no further adjustment or tuning required. Order the recommended pair or full set of four for your vehicle. Features include: * Simple installation with no welding required * Quiet operation * Absorbs impact energy progressively to prevent bent axle tubes * Maintenance-free * Compatible with suspension systems that retain factory axle and spring mounting locations * High compression rate with full memory rebound * Low temperature flexibility reduces fatigue and premature failure in subzero conditions
Not Yet Reviewed
$449.99
—
$496.99
TeraFlex control arm Sport brackets are a must to correct caster angles and restore factory geometry on your Jeep with a coil spring lift kit. They will improve overall handling and provide you with a smoother ride. And installation is easy—simply bolt-on these brackets with the stock front upper and front lower control arms on your lift kit. TeraFlex control arm sport brackets include: * Driver side front control arm Sport bracket * Passenger side front control arm Sport bracket * Front control arm bracket spacers * All necessary hardware
Not Yet Reviewed
$313.87
TeraFlex Sport FlexArms offer a full range of movement for off-road performance. These fixed-length arms provide maintenance-free performance for lifted rigs. They will correct caster and pinion angles while delivering unrestricted articulation off-road. Sport FlexArms are built with hefty DOM tubing and high-quality factory bushings that will handle trail abuse and provide excellent vibration-damping ride quality characteristics with zero maintenance. They are finished with a premium e-dipped coating for superior durability and corrosion resistance. Choose arms for the street and trail--TeraFlex Sport FlexArms.
( 2 )
$255.99
—
$541.99
TeraFlex offers heavy-duty tie rods for dozens of Jeep applications from 2011 and up. These kits are designed for extreme conditions that typically cause factory steering components to bend and fail. Constructed from chromoly steel, each HD tie rod features a larger 1 5/8 in. O.D. design for strength; in fact, they 200 percent stronger than the stock tie rod assembly. Order the model recommended for your vehicle.
Not Yet Reviewed
$550.56
—
$560.17
TeraFlex Jeep JK Wrangler 1.5 in. spring leveling kits cure the factory nose-down rake of your JK Wrangler or JKU Wrangler Unlimited. Although called leveling kits, they raise the front and the rear, as well as clearing up to 33 in. tires. These TeraFlex leveling kits are ideal for mild trails due to the increased ground clearance and the ability to fit larger diameter tires. They improve approach, breakover, and departure angles. Though rocker and skid plates can help protect the body and drivetrain, these kits may not be high enough to avoid dragging, or even getting hung up, on tall objects. Additional features and benefits of TeraFlex Jeep JK Wrangler 1.5 in. spring leveling kits include: * Longer coil springs increase suspension travel * Additional spring rate prevents sagging from heavy aftermarket bumpers, winches, and cargo racks * Work with the stock-length shocks * Kits include 2 in. lift front coil springs and 1 in. lift rear coil springs, longer front sway bar links, and all necessary hardware
Not Yet Reviewed
$558.59
—
$569.99
If you are in search of an economical way to provide lift for your Wrangler, TeraFlex Jeep JK Wrangler 2.5 in. performance spacer lift kits are just the ticket! They are specifically designed for JK owners on a tight budget who desire to lift their vehicle without many modifications. The kits are available in three configurations, and one is sure to do the trick!
( 3 )
$378.99
—
$496.99
TeraFlex Jeep short control arms provide complete alignment adjustability and dependability for maximum performance on your lifted Jeep. They bolt to the factory control arm mounting brackets, and can be added to any existing suspension lift. These adjustable short control arms balance front caster angle and optimize rear pinion angles as well as tune anti-squat geometry for proper suspension alignment. Available in kits for front and/or rear, upper and/or lower positions, each kit offers durable, thick walled DOM tube construction for maximum strength with a premium black e-dipped coating for superior durability and corrosion resistance. Select the TeraFlex short control arm kit designed for your Jeep.
Not Yet Reviewed
$252.99
—
$497.83
Dirt, fluids, rugged trails, and harsh weather all contribute to weakening the control arm bushings on your Jeep. You can restore top performance with one of the TeraFflex FlexArm joint rebuild kits. They include all of the replacement components you'll need to rebuild the joints on each arm. Complete kits are available for numerous models, including LJ, TJ, JK, and JKU.
Not Yet Reviewed
$250.99
—
$440.16
TeraFlex Jeep JL Wrangler 2.5 in. performance spacer lift kits offer the most economical way to fit larger tires and increase ground clearance on your JLU Wrangler Unlimited with the least amount of modifications. Whether Sport, Sahara, or Rubicon, TeraFlex packs the best components to give your Jeep a lift. Order the kit designed for your vehicle application. Your kit may include: * Front and rear spring spacers (different lift heights) --Taller spacers in the front will correct the factory nose-down rake --Shorter spacers in the front will correct the factory tail-down rake * Front and rear bump stop strike pad * Longer front and rear sway bar links * All necessary hardware * Front and rear bump stop strike pad shims (depending on kit) * Front and rear shock extension brackets (depending on kit)
( 2 )
$363.57
—
$495.86
Beef up your Jeep's rear-end with help from TeraFlex Monster rear adjustable track bars. These scary-strong bars are adjustable and will help to maintain the correct centering of your rear axle. Monster bars are created from heavy-duty forged steel and are powdercoated for added durability. Get the extreme strength you need to handle the abuse of your off-road adventures with the installation of Monster adjustable track bars from TeraFlex.
( 1 )
$340.81
TeraFlex Jeep Alpine IR short control arms provide complete alignment adjustability and dependability for maximum performance on your lifted Jeep. They feature innovative IR (Independent Rotation) bushings for unrestricted rotation and flex, as well as excellent NVH damping. Plus, the bushings are maintenance-free and will improve on- and off-road ride quality and performance. Available in full or partial kits with front and/or rear, upper and/or lower arms, each Alpine kit offers durable, thick walled DOM tube construction for maximum strength, anodized 6061 T-6 aluminum clamp collars to secure rod end after length adjustment, and a premium black e-dipped coating on tubes and forged rod end housings for superior durability and corrosion resistance. Select the TeraFlex Alpine IR short control arm kit preferred for your Jeep.
Not Yet Reviewed
$457.65
—
$556.63
TeraFlex Jeep JT Gladiator Alpine long arms provide complete alignment adjustability and dependability for maximum performance on Jeep models with 3 to 6 in. lifts. High-quality, dependable, maintenance-free, factory-style bushings provide excellent NVH damping and ride quality. TeraFlex Alpine long arms are offered individually, in pairs, and in sets of eight without brackets, or in a complete kit (eight arms) with brackets and crossmember. They can be added to any existing suspension lift. Features of Alpine arms and components: * Balance front caster angle and pinion angles as well as optimize rear pinion angle and tune anti-squat geometry for proper suspension alignment on 3 to 6 in. lift kits * Arms are constructed from durable 42mm x 4mm (front upper) or 50mm x 5mm (front lower, rear upper, rear lower) wall DOM tube for maximum strength * On higher lifts, bolt-on long arm brackets (kits only) reposition frame-end control arm mounting points to restore near factory orientation to reduce bushing stress during extreme droop and shock load transferred through the long control arms * Brackets are gusseted and reinforced for superior strength with reduced NVH compared to other long arm kits * Brackets feature a premium triple-stage powdercoating that provides superior durability and corrosion resistance * Front long arm suspension crossmember (kits only) provides additional strength * Install and drive simple bolt-on installation — no welding required * Re-centers axles in the wheel well for proper suspension movement, can also be used to increase wheelbase * Full range of movement will not restrict articulation or flex off-road * Zero maintenance forged threaded joints for smooth quiet flex * Premium black e-dipped coating on tube and forged rod end housing provides superior durability and corrosion resistance * Anodized 6061 T-6 aluminum clamp collar to secure rod end after length adjustment * TeraFlex Lifetime Warranty against defects
Not Yet Reviewed
$301.99
TeraFlex Alpine IR control arms offer widespread alignment adjustability for all-out performance on your Jeep. They include advanced independent rotation bushings, make use of factory brackets, and can be added to an existing suspension lift. Reach for your Jeep's maximum potential with TeraFlex Alpine IR control arms. Features and benefits: * Available as full or partial kits (front upper or lower; rear upper or lower) * Durable drawn-over-mandrel tube (42mm diameter x 4mm wall) provides maximum strength * Optimizes caster angle and tunes anti-squat geometry for proper suspension alignment * Re-centers axles in the wheel well for proper suspension movement and/or increased wheelbase * Full range of movement—will not restrict articulation or off-road flex * IR (Independent Rotation) bushings are maintenance-free and provide unrestricted rotation and flex—plus outstanding NVH damping to improve ride quality * Zero-maintenance, forged, threaded joints for smooth and quiet flex * Premium black e-dipped coating provides superb durability and resists corrosion * Anodized 6061 T-6 aluminum clamp collar to secure rod end after length is set * TeraFlex Lifetime Warranty against defects
( 1 )
$349.99
—
$596.99
TeraFlex Jeep Alpine IR short control arms provide complete alignment adjustability and dependability for maximum performance on your lifted Jeep. They feature innovative IR (Independent Rotation) bushings for unrestricted rotation and flex, as well as excellent NVH damping. Plus, the bushings are maintenance-free and will improve on- and off-road ride quality and performance. Available in full or partial kits with front and/or rear, upper and/or lower arms, each Alpine kit offers durable, thick walled DOM tube construction for maximum strength, anodized 6061 T-6 aluminum clamp collars to secure rod end after length adjustment, and a premium black e-dipped coating on tubes and forged rod end housings for superior durability and corrosion resistance. Select the TeraFlex Alpine IR short control arm kit preferred for your Jeep.
Not Yet Reviewed
$574.99
TeraFlex Jeep Alpine short control arms provide complete alignment adjustability and dependability for maximum performance on your lifted Jeep. They feature high-quality, dependable, maintenance-free, factory-style bushings that provide excellent NVH damping and ride quality, and they can be added to any existing suspension lift. Available in full or partial kits with front and/or rear, upper and/or lower arms, each Alpine kit offers durable, thick walled DOM tube construction for maximum strength, anodized 6061 T-6 aluminum clamp collars to secure rod end after length adjustment, and a premium black e-dipped coating on tubes and forged rod end housings for superior durability and corrosion resistance. Select the TeraFlex Alpine short control arm kit preferred for your Jeep.
Not Yet Reviewed
$393.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
