Availability
Bring out the performance of your 4x4 with these Maximizer transmissions from the folks at TCI. Four-wheel drive vehicles are tough on automatics, especially with the addition of a lift kit and larger tires. Maximizer transmissions are built with that in mind. Each one is assembled with the strongest components available and designed to provide crisp shifts, time and time again. They give you all of that, and they'll deliver long and dependable service, too.
( 29 )
$2,122.95
—
$2,345.95
TCI introduces a fresh line of quality filler tubes. Applications for the most popular Ford, GM, and Chrysler transmissions are available. Most of the dipsticks feature a locking stick that satisfies sanctioning bodies' racing rules. The rubber boot seal is a vast improvement over the small O-ring typically used on older OEM tube designs.
( 186 )
$40.95
Investing in TCI transmission pans ensures the longevity of your transmission. They offer a selection of designs, depths, materials, and finishes to keep your transmission cooler and your undercarriage looking good. Skip the pans of lesser quality doomed to warp and leak; choose the policy of lasting performance from TCI transmission pans. TCI cast aluminum pans feature: * Exterior cooling fins wick away and dissipate heat * Provides additional strength and rigidity to transmission case * Ensures long transmission service-life * Include all required accessories and hardware necessary for installation TCI Max-Cool aluminum pans feature: * Black powdercoated finish * Large fluid capacity reduces internal transmission temperature * Exterior cooling fins wick away and dissipate heat * Aircraft-quality aluminum construction for strength and durability * Magnetic drain plug TCI polished die-cast aluminum pans feature: * Thicker than stock pans * Finned and polished to a high luster * Stock depth to avoid ground clearance issues * Includes drain plug for simpler fluid and filter changes * Includes necessary gaskets, filters, and installation hardware TCI chrome-plated steel pans feature: * Stock depth is easy to install * Includes drain plugs * Thicker than stock for added durability * Chrome prevents rust and adds show quality looks
( 183 )
$164.95
—
$221.95
Get maximum performance and quicker ETs with these TCI full manual valve bodies. They're engineered to allow full manual control of the valve body, for quicker shift timing and higher line pressures. You get less clutch slippage under high load, so that more power gets to the ground. They're a great choice for bracket cars, monster trucks, and virtually any off-road competition vehicle where a transbrake is either illegal or undesirable.
( 58 )
$338.95
Maximize your transmission's power potential! TCI sprag and drum assemblies are designed to reduce rotating mass without compromising drum integrity. They will hold up to five clutches and are hard coated for improved wear characteristics.
( 6 )
$517.95
—
$548.95
These TCI transmission Master Racing overhaul kits are designed for racers who maintain their own transmissions. They contain parts that are required when freshening up an existing competition transmission. You'll receive the high performance filter, clutches, steels, seals, gaskets, and bushings normally replaced during a rebuild. In addition, kits for late model GM overdrive transmissions also include a new performance band.
( 58 )
$232.95
—
$251.95
No matter what transmission you have, there are a lot of different parts that are required to make it work. TCI has you covered with these racing transmission filter and pan gasket kits. They will provide more flow with superior particle filtering, to extend the life of your transmission.
( 100 )
$32.95
TCI Extreme Racing starters are engineered for racing and tight engine swaps where a smaller, lighter weight starter is desired. These starters are new, not rebuilt. They not only reduce front-end pounds for better weight distribution, but they will also provide extra room for headers, oil pans, and increased ground clearance as well. TCI Extreme Racing starters are built with full ball bearings for less friction and more torque, a heavy-duty contact disc solenoid for more consistent starts, and a high-temperature, epoxy-encapsulated armature to resist heat and vibration. Their efficient design draws less amperage, leaving more power for your ignition system to keep you in the race.
( 2 )
$355.95
Don't go to the junkyard looking for that replacement transmission yoke for your performance application--TCI has you covered. Since your application may not match with manufacturer specifications, TCI can supply you with a matching yoke without any hassles.
( 14 )
$212.95
TCI steel transmission pans are the perfect replacement for performance and appearance beneath your vehicle. These steel reservoirs are thicker than stock for longevity, and some models are beautifully chrome plated to further prevent rust—in addition to including a drain plug to facilitate fluid maintenance. Over time, many transmission pans develop a warped, leaky gasket flange, or become damaged by road debris. Protect your transmission by bolting on one of these economical replacement upgrades from TCI.
( 67 )
$67.95
—
$83.95
TCI high-performance intermediate sprags feature more elements than stock, to provide better holding power. They are available for a variety of applications to suit your needs.
( 2 )
$127.95
High torque starters from TCI should be your pick for tow truck and street performance applications. These starters are OEM remanufactured with four fields of windings with high-temperature solenoids and will produce 20 percent more cranking power than stock to keep you moving. The high torque starters are resistant to heat produced by performance exhaust headers and will take repetitive cranking without failure. TCI high torque starters offer great power at a small price.
( 28 )
$279.95
These universal TV/kickdown cables from TCI are designed to be economical replacement throttle valve cables. They feature an adjustable outer sheath, making them true universal replacements.
( 46 )
$51.95
TCI Racing starters are engineered for racing and tight engine swaps where a smaller, lighter weight starter is desired. These starters are new, not rebuilt. They not only reduce front-end pounds for better weight distribution, but they will also provide extra room for headers, oil pans, and increased ground clearance. TCI Racing starters are built with full ball bearings for less friction and more torque and a heavy-duty contact disc solenoid for more consistent starts. Their efficient design draws less amperage, leaving more power for your ignition system.
( 9 )
$294.95
TCI Permanent Magnet racing starters are engineered for racing and tight engine swaps where a smaller, lighter weight starter is desired. These are new, not rebuilt, starters that weigh almost 50 percent less than stock for less front-end pounds, and to provide extra room for headers and oil pans, as well as increased ground clearance. TCI Permanent Magnet racing starters are built with heavy-duty pinion bearings and a heavy-duty contact disc solenoid with 12 clocking positions for more consistent starts.
( 14 )
$251.95
TCI severe-duty transmission crossmember mount kits are made from urethane, and feature safety interlocks between mounting points. These kits are a great addition for high-horsepower applications that require maximum shock absorption.
( 5 )
$66.95
TCI Pro Super transmission overhaul kits contain the same parts and pieces used in building TCI Streetfighters. You will receive components normally replaced on a transmission rebuild, along with new performance frictions and steels, plus a Trans-Scat valve body kit, which enables you to change the valve body to a manual/automatic setup that delivers both a good solid shift suitable for towing applications and a competition-quality shift for drag racing. Features: * Seals, gaskets, and bushings * High performance frictions and steels * Reusable-type pan gasket * Adjustable modulator * High-volume filter * Drain plug kit * Trans-Scat valve body kit * Performance band included in 700R4, 4L60E, and 2004R kits as they normally require a band during regular repair cycles
( 87 )
$368.95
TCI automatic transmission rear case bearings are designed to take up the endplay in your automatic transmission's tailshaft housing. They include a needle thrust bearing assembly and three different shim thicknesses to adjust the endplay to your specific transmission.
( 12 )
$33.95
These TCI shifter levers are designed as replacements for your damaged or missing levers. Depending on the applications, all hardware is included for a complete installation.
( 19 )
$50.95
TCI high performance heat-treated sprag races are special intermediate outer roller clutch races that help to prevent sprag failures. TCI high performance heat-treated sprag races directly replace the stock outer races to improve the strength of your transmission.
Not Yet Reviewed
$144.95
These TCI PRO-X TH400 aluminum tailhousings feature light weight and improved strength, while using a tailshaft roller bearing rather than the factory bushing for superior lubrication and durability. The OEM bushing is a common failure point with TH400 transmissions, as it can run dry in high-speed TH400 applications. The TCI PRO-X TH400 aluminum tailhousings are more rigid than other factory or aftermarket tailhousings, with increased structure for added support and durability. The use of the roller bearing provides added lubrication, and the usually unreliable paper gasket used to seal the housing to the transmission is replaced with a precision-machined surface that incorporates an O-ring for a solid, drip-free connection. Build a stronger transmission and have better reliability with one of the TCI PRO-X TH400 aluminum tailhousings.
( 4 )
$288.95
Don't let worn-out gaskets on seals keep you from winning. TCI Racing Overhaul kits include oil seals, sealing rings, gaskets, and front and rear seals. Also included in each kit is a set of valve body gaskets. They have everything that you need in soft parts for an automatic transmission.
( 4 )
$84.95
These thrust washer kits from TCI contain assorted thickness Babbit and/or nylon thrust washers designed to correctly set proper case clearance and control end play during transmission assembly. TCI offers several different kit applications to best suit your vehicle needs.
( 11 )
$47.95
—
$50.95
TCI Competition transmissions are designed to take the abuse of drag-racing competition. They're available with full-manual and trans-brake setups and retain no automatic shift features. They feature special heat-treated races and sprags, high-performance clutches and bands, and improved lubrication. TCI blueprints and modifies these transmissions for maximum performance, then dyno tests and pressure tests them. So you can concentrate on winning the race!
( 31 )
$3,113.95
—
$3,830.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
