Availability
Stock intake manifolds in electronic fuel injection vehicles often fall short of lasting for the life of the vehicle. Being molded from polymers they tend to warp or crack and start leaking vacuum or coolant over the years. Summit Racing™ Premium EFI intakes are just what you need when it's time to replace your manifold as our design improvements address the failures that occur with existing manifolds for this application on the market today. These units are made to fit your specific vehicle and come complete with the necessary hardware for an easy OE type installation. Make this the last manifold you ever buy for your car or truck. Check out these features and benefits below: • Made in USA by OE Tier 1 Supplier • Aluminum crossover design improvement to mount direct to the cylinder head eliminating coolant exposure and eventual failure at the plastic interface of existing manifolds on the market. • High grade coolant resistant material used in coolant fitting and block out locations to coolant system. All coolant exposure areas are addressed with appropriate material. • Heat staked inserts for coil mounting. • Includes alternator brackets, throttle body adapter (application specific), thermostat, gaskets or O-ring seals, and mounting hardware.
( 65 )
$199.99
—
$242.99
Summit Racing™ OE-style harmonic dampers are ideal for those mild street rebuilds that don't require the expense of a high-buck race damper. They feature durable nodular construction with bonded elastomer between the inner and outer rings. The balancers also have engraved timing marks, which means no timing tape! Summit dampers are available in a variety of sizes for many engine balance applications. Models are available for hundreds of vehicles; order the OE replacement recommended for your ride.
( 667 )
$101.99
—
$105.99
Summit Racing™ hydraulic lifters are designed with two things in mind: High quality and affordability. We think you'll be happy with the results. These lifters have a lengthened plunger, designed for less wear and to provide precise oil control through 6,000 rpm.
( 104 )
$137.99
—
$139.99
Whether you're looking to add amperage to your electrical system, or style to your engine compartment, we've got a Summit Racing™ alternator to help you accomplish your mission. Depend on Summit Racing™ to get the power you need and the space you crave.
( 919 )
$136.99
—
$189.99
On Sale
Our Summit Racing™ cast aluminum intakes are the perfect performance upgrades for your engine. The dual plane carbureted manifolds feature a runner design to deliver improved power. They're available in a variety of sizes, RPM ranges, and finishes. Order the model recommended for your vehicle application.
( 50 )
$209.99
Summit Racing™ OE replacement flywheels offer a great fit and an economical price. They are manufactured from ductile iron and offer original fit and function. Replace your old flywheels with Summit Racing™ OE parts.
( 72 )
$126.99
—
$176.99
Get more power from a high-energy ignition than you ever expected with a brand new Summit Racing™ blueprinted HEI distributor. They feature a 50,000 V coil, medium weight advance springs, and an aluminum housing. The distributor shafts are guided by precisely aligned bushings for durability in extended street use, and most models include an adjustable vacuum advance. Separate advance springs are available, so you can fine-tune to your hearts content. Be in it to win it—with the Summit Racing™ blueprinted HEI distributor designed to fit your application.
( 1243 )
$177.99
—
$247.99
You don't have to sacrifice safety or quality to save money; our affordable Summit Racing™ bracket racer SFI dampers have been spin-tested to 12,500 rpm and carry an SFI-18.1 rating. The carbon steel dampers have an injection-molded and bonded elastomer, easy-to-read engraved timing marks, removable counterweights (where applicable), and a highly polished baked-enamel finish, so they look as good as they perform.
( 390 )
$179.99
—
$189.99
Our Summit Performance® headers are manufactured from mandrel-bent tubing for superior flow and greater horsepower. The headers feature a pressure-formed collector for a better flow rate and a JIG-welded tube-to-flange plate for a perfect fit. They're made for off-road and racing use only. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom-altered parts, then it is the installer's responsibility to verify fitment. The headers are available in a wide range of styles, sizes, and configurations. Order the pair recommended for your application. (Special warning regarding Summit Racing™ painted headers only. The paint on these headers is not designed as a final finish; it is designed to protect the headers after the manufacturing process and during shipping. This paint will not withstand the high heat associated with engine break-in, nor will it withstand the heat cycles associated with any type of driving. It is recommended that this protective coating be stripped, and a high heat paint or coating designed for use on headers be applied.)
( 2025 )
$184.99
—
$249.99
Summit Racing™ Protorque Starters are 100 percent new! Our lightweight Nippondenso-type starters offer a 4.0:1 gear-reduction ratio and a whopping 1.9 HP. That's 222 ft.-lbs of racecar cranking power. If that's not enough cranking power to suit you, there are even more powerful 3.1 hp monsters, which are a pound lighter! They have a 4.44:1 reduction ratio and churn out an awesome 342 ft.-lbs. of torque. Both of our Summit Racing™ powerhouses are suitable for engines up to 502 c.i.d., and compression ratios of up to 18.0:1. GM versions are adjustable for five mounting positions; Ford types, for 18. And, to prevent corrosion and electrical shorts, both starters wear a gold dichromate finish.
( 603 )
$235.99
—
$247.99
Summit Racing offers Mustang conversion oil pans for a variety of small block Windsor engine applications from the 1970s, 80s, and '90s. These steel pans include a pickup, dipstick, and main cap stud—and they're available with a black or chrome finish. The wet sump style oil pans are ideal replacements, ensuring proper lubrication for your street/strip muscle car.
( 24 )
$211.99
—
$234.99
Summit Racing™ Venom black milled polished lip wheels add lethal looks to your vehicle. Offered in a long list of sizes, our cast aluminum Venom wheels provide a wide split 5-spoke pattern perfect for allowing everyone to get a good look at your high performance brakes. The spokes have a durable black finish with milled edges surrounded by a gleaming polished lip. Choose the ideal size to fit your vehicle.
( 39 )
$202.99
—
$245.99
For fast, precise, and comfortable shifts, grab an American-made Summit billet aluminum short-throw shifter! The heavy-duty body is completely CNC machined—no welds, stampings, or castings—for durability and a precise fit. Inside, the nickel plated steel pivot shaft has been machined to exacting tolerances for smooth operation, and offset pre-load springs help you snag third even when shifting hard. Your shifts are 30 percent shorter, the lightweight forged aluminum stick places the knob closer to the driver, and you can re-use your factory boot and knob for a clean look.
( 130 )
$140.99
—
$144.99
Saggy, old springs can ruin your ride. Restore factory-fresh handling with stock-height rear leaf springs from Summit Racing™. They will fit and perform just like the originals, making the install easier and your ride quality like-new. Select the rear leaf springs designed for your vehicle.
( 55 )
$119.99
—
$159.99
Summit Racing™ master cylinder and brake booster combos deliver top-quality braking power and are designed to mount directly to your factory firewall. They work great as factory replacements or an upgrade from manual to power brakes for vehicles with automatic transmissions. Kit components are available in different sizes, styles, materials, and finishes for fitment on countless vehicles from the 1950s, '60s, and '70s. Make your quick stops effective and safe with Summit Racing™ combo kits!
( 41 )
$165.99
—
$238.99
Add the race look to your vehicle without the high price. Our high-quality, cast-aluminum one-piece Summit Racing Equipment® Fast-Five wheels include a center cap, 5-spoke star-style design, and are available in multiple bolt patterns to suit your performance needs.
( 52 )
$152.99
—
$176.99
Summit Racing™ offers clutch kits to fit thousands of vehicle applications. These stock-style replacements are engineered to OE design and performance standards. They will work in tandem with your transmission to deliver smooth gear shifts and an enjoyable ride. Besides the quality product, Summit Racing™ clutch kits present a fantastic value. Order the model recommended for your car, truck, Jeep, or SUV.
( 95 )
$138.99
—
$185.99
Stop searching junkyards and swap meets for a replacement for your cracked or broken timing cover. These Summit Racing™ Ford front covers are direct replacements for your stock timing chain cover. Windsor and Big block applications feature cast construction, while Cleveland/Modified covers are laser cut steel, just like OEM!
( 57 )
$118.99
—
$178.99
Trust Summit Racing™ to give you timing sets that will deliver accurate, reliable cam timing. Our billet steel true roller timing sets have rugged double-row, true-roller chains teamed up with billet steel crank and cam sprockets. The crank sprockets have multiple keyways, which allow you to modify your cam timing. Get reliable timing from Summit Racing™ billet steel timing sets.
( 120 )
$104.99
—
$237.99
Here's a simple high performance solution! Our Summit Racing™ camshafts feature straight-grind, and are designed for use with hydraulic flat tappet lifters. The tight lobe separation will boost your torque, throttle response, and mid range power for exciting action at the track and on the road.
( 162 )
$171.99
—
$174.99
You spend a lot of time inside your car. Overhaul the appearance of your interior by replacing worn, stained, or ripped factory carpet with a Summit Racing™ custom-fit molded carpet kit. Each kit is cut and tailored to your specific vehicle, making installation easy and avoiding extensive trimming. Summit Racing™ has partnered with the premier manufacturer of automotive carpeting to offer these kits in your choice of molded vinyl, cut pile, or nylon loop. They're available in popular factory colors to help you choose the look and feel desired. Whether it's your daily driver or a 100-point restoration, Summit Racing™ custom-fit molded carpet kits have you covered.
( 157 )
$129.99
—
$249.99
Our Summit Racing™ SFI-approved flexplates are built for racing. They're thicker than stock, double-welded with a forged one-piece ring gear. Available in several internally and externally balanced applications. NOT FOR MARINE APPLICATIONS.
( 505 )
$123.99
—
$196.99
Clearance
Summit Racing™ roll-up tonneau covers offer great looks and an affordable price. They're crafted from heavy-duty strength vinyl with sturdy aluminum rails, and their secure hook and loop attachment provides easy-to-fasten, unbroken contact between the rails and covers. The preset tension control keeps your cover smooth and aerodynamic, and your rig fuel-efficient. Of course, installation is easy--no drilling or cutting is required. And operation is even easier--you can roll them up in seconds, by yourself. Product highlights and features: * Heavy-duty tear- and weather-resistant vinyl cover * Multi-tiered hook-and-loop fasteners hold firm in all conditions * Integrated structural support rods prevent sagging, pooling, and flapping * Low-profile design for sleek styling * Complete bed access when transporting oversized cargo * Adjustable tension control system * Nylon straps included to secure the cover in the open position while driving * Simple, no-drill installation
( 30 )
$189.99
$169.50
Summit Racing™ mechanical fuel pumps are affordable replacements that deliver superior flow. They're available in two versions; one has 1/4 in. NPT inlets and outlets, provides 5.7 to 8 psi, and can free-flow 80 gph. That's twice what a normal pump delivers. The other has 3/8 in. NPT ports, delivers 6.5 to 8 psi, and can free-flow a hefty 110 gph. These pumps are offered in different finishes; and the lower housings of each unit can be rotated through 360 degrees for easy installation in tight spaces. Order the model recommended for your year/make and engine application.
( 521 )
$119.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
