Availability
C-clip eliminators, which were originated by Strange Engineering, are required by drag racing rules for good reason. C-clip type axles are retained by a clip above the spline portion of the axles. When the stock axle or differential breaks, the entire axle/brake/wheel assembly can slide completely out of the housing. Strange's C-clip eliminators eliminate wheel loss and worn bearing areas. The bearings are retained and the axles are held securely in place by the C-clip eliminators, which are bolted to the stock axle housing through the existing backing plate holes.
( 24 )
$188.99
—
$284.99
Whether you're narrowing a rear axle housing for bigger tires, or just building a new housing for your street car, you will need housing ends to complete the project. These Strange rear housing ends are offered in five popular styles, each CAD-designed to ensure a proper fit. They are forged from mild steel for ease of welding and then fully machined on CNC equipment.
( 12 )
$149.99
Strange 9 in. nodular iron cases have steel bearing caps with socket head cap screws and machined adjusting nuts. The cases use D-4512 nodular iron--eight percent stronger than OEM nodular iron--and have extra material around the pinion pilot bearing area to prevent cracking. The bolt holes are deep-tapped and cast with extra material around their diameters. Bearing bores and reinforcing ribs are also cast with additional material for strength, and the stud holes are spot-faced to prevent leaks and mounting surface damage.
( 22 )
$288.99
—
$368.99
Strange Lightweight Pro Race spools give you the traction that you need by locking the axle shafts together, forcing your rear tires to turn at the same speed. They're CNC-machined from forged chromoly steel to provide a more rigid ring gear mounting. This eliminates the gear failure caused by case deflection or differential side-gear failure. For even lighter weight, there are aluminum-alloy versions available for some applications.
( 33 )
$178.99
—
$294.99
Strange C-Clip axles are designed for those wanting to upgrade their axles to stronger, more reliable units. These axles are manufactured from the same high-strength steel as the rest of the S-Series performance axles that have proven themselves in race and road cars all over. Their hardened surface protects the axles and bearings, giving them a longer service life and their deeper case hardening offers superior torsional strength when compared to OEM axles. Each axle features fully ground bearing surfaces, is designed to work with OEM bearings, and is drilled for screw-in and OEM press-in studs. Upgrade your axes to help reign in and plant all of the horsepower your hot rod or race car can muster with these Strange C-Clip axles.
( 21 )
$389.99
Strange HD Pro aluminum case kits offer large bore sizes for the highest splined axles. They use superior 206-T4 heat-treated aluminum, which has 12 percent more yield strength and 32 percent higher tensile strength than the commonly used 356-T6; it's also substantially lighter than an iron case. HD Pro kits are designed for drag racing or abusive street/strip applications with high horsepower and torque. They feature a billet pinion support with 360 degree channel to maximize oil flow to the pinion bearing, as well as two contact points with the bore of the case--which holds the pinion shaft more securely for improved bearing and gear life. Their oversized tail bearing handles more load and greater rpm; billet main caps with chromoly studs support the carrier bearings, while significantly reducing ring gear deflection.
( 3 )
$894.99
A perfect match for your Strange Engineering pinion supports, Strange offers Timken pinion bearings. They are high-quality units that will make the most of your Strange setup.
( 12 )
$34.99
—
$117.99
These Strange Daytona pinion supports use larger pinion bearings and oil porting to provide an increase in strength over stock pinion supports. They are ideal for oval track and street/strip applications.
( 6 )
$114.99
These Strange Engineering aluminum pinion supports are completely CNC-machined from Strange Engineering designed forgings. They are an economical solution to replacing failure-prone stock supports. These supports are designed for drag racing only and are not suitable for continuous use.
( 6 )
$149.99
—
$164.99
Strange drain plug assemblies are perfect for adding a drain plug to anywhere you need to change fluids, but don't have a factory drain plug. Each kit includes a weld bung and pipe plug. Each new plug protrudes 1/8 in. to 3/16 in. from the top of the bung when installed. Plug diameters are: 1.100 in. O.D. x 0.225 in. deep inside end, with a 1.300 in. O.D. x 0.150 in. tall flange.
( 17 )
$11.99
Strange offers their rear axle housings in a variety of configurations, from just the center housing to complete, ready-to-bolt-in assemblies. The axle housings are designed and manufactured to be more rigid and stronger than OEM housings. Depending on the application, they're fabricated from proprietary nodular iron (substantially stronger than cast iron) and other quality materials—then fixture-welded to ensure proper alignment; slotted for full tube engagement; and reinforced at critical areas to reduce center section and axle tube flex. Whether your car is headed for the street, the track, or the drag strip, customize the rear-end with a Strange rear axle housing so it will meet or exceed your expectations.
Not Yet Reviewed
$334.99
—
$794.99
Strange Engineering provides you with another name brand you can trust: Timken. These kits supply you with two cups and two cones to complete the installation of an S/T Series spool.
( 6 )
$44.99
—
$54.99
These Strange Standard series spools are an affordable and dependable option when weight is not a primary concern. These Standard series spools are designed to be an easy changeover from OEM-type units. The internal splines are left in the stock location, allowing for the use of existing stock axles. Since the release of the Standard series spools, their popularity has become unmatched, and in most cases, they are even lighter than the competition's lightweight spools .
( 13 )
$178.99
—
$224.99
These Strange aluminum differential covers feature cast aluminum construction with optional extreme-duty bearing cap support for uncompromised differential protection. These covers are available for a variety of applications with different fit and finish options. All covers include gaskets and mounting hardware.
( 10 )
$128.99
Ford 8.8 aluminum support covers feature two premium grade load bolts; providing main cap support. The additional support of the case main caps dramatically reduce ring gear deflection, stabilize gear backlash, and diminish the change of cap breakage and or distortion. The ultimate cover features two tapped hole, which will accept the optional LPW brace kit.
( 11 )
$241.99
Axle housings need hardware--and Strange brake backing plate fastener kits are a preferred choice for quality and function. These steel components are black oxide coated to resist rust and corrosion. The fastener kits include T-bolts, washers, and nuts to fit a variety of axles. Select the thread size and length required for a perfect fitment on your vehicle.
( 12 )
$38.79
—
$46.79
Strange pinion depth shims allow you to seat your pinion gear perfectly. They're made of durable steel to withstand years of use and abuse. Strange Engineering offers these shims in a variety of thicknesses to custom-fit your axle model application. Installing gears is made easier with a set of Strange pinion depth shims.
( 4 )
$19.99
—
$59.99
These Strange billet aluminum differential main bearing end caps are lighter and far superior in strength to OEM caps. They are manufactured from heat-treated 2024-T351 billet aluminum and will provide exceptional durability at minimal weight. The end caps include 12-point chromoly steel and black oxide finished mounting hardware to complete installation.
( 15 )
$119.99
—
$122.99
Keep your axle shafts from leaking with a set of these Strange replacement C-clip eliminator hub gaskets. They are manufactured from quality materials to ensure a leak-free seal.
( 9 )
$3.99
—
$10.99
Strange Engineering offers their 2-piece pinion bearing preload assemblies to help you to maintain proper preload for your GM 12-bolt application. They're made from high-quality materials, and are designed using state-of-the-art technology to deliver great performance at an affordable cost.
( 5 )
$34.99
Strange C-clip replacement eliminator seals will help you get back out on the track. The seals are exactly the same as the ones that came in your original kit, so fit and function will be perfect. Don't waste time searching for a seal that will work when you can go to Strange and get these replacement C-clip eliminator seals.
( 2 )
$16.99
—
$18.99
Strange Engineering differential pinion nuts are designed to securely mount a pinion yoke. They are available in different styles and applications and can be installed with no modifications.
( 3 )
$7.99
—
$13.99
Strange pinion yoke spacer kits are required when using a stock Ford or Daytona pinion support on Ford 9 in. applications. They are manufactured from hardened steel and install without any special tools. The Strange pinion yoke spacer kits include spacers with two different thicknesses to help get the correct spacing for the pinion yoke.
( 5 )
$10.99
Designed by Strange Engineering, these steel differential vents have a pipe-threaded stem to install easily into the existing differential or other gear-housing vent holes. They come nickel-plated with a sintered bronze insert for long-lasting performance.
( 6 )
$2.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
