Filters
Scott's Hot Rods IFS packages are the ultimate improvement to the ride quality and handling of your classic vehicle. Starting with a ground-up, clean-sheet design, these independent front suspension kits are custom-fit to your specific chassis. Optimized steering and suspension geometry provide modern handling, while adding the convenience and feedback of rack-and-pinion steering. Designed and fabricated in-house ensures precise, accurate fitment. These IFS packages are available in a wide array of ride heights, suspension options, brake configurations, and even wheel bolt patterns! Features include: * Stock, mild, or low ride height configurations * One-piece, boxed steel crossmember construction * Frame/chassis-specific frame notches and reinforcement plates * Fully adjustable, tubular upper and lower control arms * Oversized serviceable ball joints * Built-in anti-dive geometry * Rack and pinion steering * Forged steel spindles (stock or drop-height options) * Available with Wilwood brake packages in multiple color choices * Available air bag and multi-level coilover suspension options
( 4 )
$3,769.99
—
$13,332.00
Scott's Hot Rods offers bolt-on exhaust hangers in a variety of styles and sizes. CNC-machined from billet aluminum, the hangers can be mounted in many locations to work with whatever situation you have underneath your vehicle. The upper mount can be ordered flat or coped for 1 1/2 in. tubing. These hangers are available to fit 2 1/2 in. or 3 in. diameter exhaust pipes, and include high-temperature bushings and aluminum clamps.
( 1 )
$98.00
Scott's Hot Rods billet line clamps are CNC-machined from 6061 billet aluminum. They're engineered to clean up the routing of soft and hard lines on your custom hot rod—and the 2-piece design allows for easy installation. The clamps sandwich your lines and are secured with a stainless steel 10-32 buttonhead bolt. Scott's Hot Rods billet clamps are available in most common sizes, in fixed or floating styles, for either hard or soft lines.
( 2 )
$11.99
—
$37.79
Scott's Hot Rods enables you to clean up your engine compartment—by mounting their billet aluminum remote reservoirs anywhere you choose. The universal design allows them to be used for brake or clutch master cylinders, so that you can combine both into one reservoir, or mount a separate one for each unit. They're offered in a variety of sizes and finishes. Additional features: * Constructed from CNC-machined 6061 T-6 billet aluminum * Available in single, double, or triple configurations * 1/8 in. NPT fittings on rear and bottom for multiple mounting configurations * 1.1 oz. capacity per reservoir tube * Reservoir includes gasket, diaphragm, and billet lid
( 7 )
$121.00
—
$154.00
Scott's Hot Rods motor mounts are available for stock or custom fit—on any car, utilizing any motor combination. These heavy-duty TIG-welded steel mounts can be bolted or welded into place. They include polyurethane bushings to absorb vibration, and the mounts are guaranteed not to break under stress. Order the model recommended for your vehicle and engine application.
( 1 )
$185.00
—
$323.00
Scott's Hot Rods custom billet A/C bulkheads include all necessary hardware and general instructions. They're available in a variety of styles, shapes, finishes, and fitting sizes. (Lines are not included. Some adapting may be required for installation, depending on your configuration.)
( 2 )
$77.00
—
$110.00
Scott's Hot Rods manufactures these pedal assemblies so that you can easily mount pedals in your street rod or anything else with wheels and an engine. They're available for mounting on the firewall, under-dash, or on the frame—with just brake pedal or brake-and-clutch pedal assemblies for those who like to shift gears. In addition, Scott's pedal assemblies are 100 percent TIG-welded and feature brass bushings with no grease fittings required. These assemblies are available by themselves, or with a Wilwood brake master cylinder or Wilwood brake-and-clutch master cylinder. Pedal arms and pads are sold separately.
( 1 )
$291.00
—
$389.00
Scott's Hot Rods 4-bar rear suspension kits have a simple design, but will greatly improve the ride quality and handling of your hot rod or custom. These truly equal length parallel 4-bars use a very long, perpendicular panhard bar to maximize efficiency and reduce lateral movement. Both user-friendly and fully adjustable, the kits also use their CNC-machined and tapped stainless steel rod ends with right-hand or left-hand thread, allowing you to adjust the pinion angle and setup without unbolting the link bars. And unlike a Triangulated 4-link system, the pinon angle does not change throughout the travel of the suspension. The kits are offered with coilovers or airbags. Your rear suspension is just as important as the front to the ride and handling of your car; install a Scott's Hot Rods 4-bar rear suspension kit and increase your driving pleasure. Additional notes and what's included: * CNC-machined 1 1/8 in. x 1/4 in. wall DOM tubing link and panhard bars (adjustable RH- and LH-thread) * Scott's utilize a bar as long as possible per vehicle application to ensure the least amount of lateral movement * CNC-machined stainless steel rod ends--RH- and LH-thread * FK Bearing heim joints--RH- and LH-thread * Aldan American single-adjustable coilovers or Firestone 9000 tapered air springs * Coilovers are the most popular for everyday cruisers * Airbag kits are for those who want to lay their vehicle on the ground * Upper shock crossmember is standard on all kits allowing you to determine final ride height when installing * Rear-end housing brackets * Front frame brackets * 5/8 in. Grade 8 hardware * Lifetime guarantee
( 4 )
$2,093.00
—
$8,665.50
Stock taillights don't provide much light output and aren't very effective at alerting drivers that you're braking or turning. They use standard bulbs which create a lot of heat, won't last very long, and aren't exciting to look at. Scott's Hot Rods new billet LED taillights are the upgrade solution. With 174 LEDs per side, they'll make your eyes water—while also conducting far less heat, lasting for 1,000's of hours, and offering a unique look. The taillight housings are manufactured from 6061 T-6 billet aluminum, with blinkers, brake, and taillights built-in. They're made in the USA using solid-state, epoxy coated, and fully sealed electronics. All necessary hardware and installation instructions are included.
Not Yet Reviewed
$506.00
—
$550.00
Scott's Hot Rods universal defrost ducts are manufactured from aluminum, with your choice of finish. They're available in different styles, each facilitating maximum airflow. Many of these replacement vents are designed for use with Vintage Air defrost ducts. Order the pair recommended for your application.
Not Yet Reviewed
$99.00
—
$110.00
Scott's Hot Rods column saver kits will allow you to maintain your factory steering column while upgrading your front suspension with a new manual or power rack. These kits enable a 1.500 in., 1.750 in., or 2.000 in. factory steering shaft to be connected to a 3/4 in. DD shaft. Select the kit designed to fit your column application.
( 1 )
$121.00
Scott's Hot Rods remote reservoir lids are made to complement the looks of your master cylinder's remote reservoir. Each replacement lid is crafted from solid billet aluminum, with either a natural, polished, or black finish. The lids are available drilled and tapped with NPT ports in various sizes.
Not Yet Reviewed
$96.00
Scott's Hot Rods manufactures their pedal assemblies so that you can easily mount pedals in your street rod or anything else with wheels and an engine. They're available for mounting on the firewall, under-dash, or on the frame with just brake pedal or brake-and-clutch pedal assemblies for those who like to shift gears. Once you mount your new Scott's pedal assembly, you'll need these pedal arms to mount to your assembly. The pedal arms are made from 6061 T-6 billet aluminum, machined to a beautiful finish to really set off your interior. They are available in either brake pedal or clutch pedal styles. (These are the arms only; pads are sold separately.)
Not Yet Reviewed
$248.00
Scott's Hot Rods' rod end bushings and sleeves are perfectly designed for your custom build. The polyurethane bushings are meant for 4-bar ends, making them an essential addition for your project. The steel sleeves provide a robust and reliable framework for your rod end bushings. The backbone of any vehicle build is the chassis and suspension. If the chassis is weak and the vehicle rides and handles like a wagon, it doesn't matter how pretty it is. Optimize steering and suspension geometry for modern day handling with chassis and suspension components from Scott's Hot Rods.
Not Yet Reviewed
$209.99
Scott's Hot Rods bolt-on IFS packages are the ultimate improvement to the ride quality and handling to your classic ride. Starting with a ground-up, clean-sheet design, these independent front suspension kits are custom-fit to your specific chassis. Optimized steering and suspension geometry provide modern handling while adding the convenience and feedback of rack-and-pinion steering. Designed, manufactured and fabricated in-house ensures precise and accurate fitment. Making the conversion process even easier, the bolt-on version of Scott's IFS packages offer simple installation advantages without sacrificing the factory system. Available in a wide array of ride heights, suspension options, brake configurations and even wheel bolt patterns! Features include: * Bolt-on installation for easy conversion * Stock, mild, or low-ride height configurations * One-piece, boxed steel crossmember construction * Frame/chassis-specific frame notches and reinforcement plates * Fully adjustable, tubular upper and lower control arms * Oversized serviceable ball joints * Built-in anti-dive geometry * Rack and pinion steering * Forged steel spindles (stock or drop-height options) * Available with Wilwood brake packages in multiple color choices * Available air bag and multi-level coilover suspension options
Not Yet Reviewed
$4,314.99
—
$13,332.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
