Availability
Scott Drake coil spring seats bolt to the upper control arm and support the bottom of the coil spring. They are manufactured from stamped steel--and use durable bushings and anti-squeak protector pads.
( 48 )
$86.59
These replacement control arms will not break the bank! These Scott Drake reproduction control arms are all-new, not rebuilt units. Scott Drake manufactures these control arms from quality materials, ensuring a good fit. Additional features include the following: * Shaft * Bushings * Riveted ball joints * Nut with cotter key * 90 degree Zerk fittings * Washers and locking nuts
( 35 )
$84.09
—
$97.55
Scott Drake offers neutral safety switches to replace your damaged, missing, or faulty original. They're available for a variety of transmission applications from the 1960s and '70s. These quality reproductions are factory-style, so they will fit your vehicle without any modifications.
( 24 )
$71.89
On Sale
Scott Drake replacement outside mirrors will enhance the look of any classic musclecar or restoration project. They're offered in a variety of styles, such as racing, bullet, round, and rectangular. Most of the housings are die-cast aluminum with a chrome finish—although some models are primed and ready for your custom paint. Choose from flat or convex mirrors, and either manual or remote adjustment. Browse through the dozens of driver and passenger side options, then select the Scott Drake mirrors designed for fitment on your vehicle.
( 183 )
$62.19
—
$97.55
Scott Drake FE oil filter adapter is an exact reproduction of the updated version Ford switched to in 1968 which provides increased oil flow compared to earlier versions. It is an excellent upgrade for any pre-1968 high performance engine where oil flow is critical.
( 16 )
$78.05
Power steering hoses need to fit properly—and Scott Drake offers a selection of quality replacements at affordable prices. They have designed authentic reproductions for your classic Mustang to provide not only the fit but the look, as well as carrying aftermarket styles. These lines feature the right bends and ends to make your install easier. Restore or repair your power steering with OE-style hoses and lines from Scott Drake.
( 38 )
$51.19
—
$62.19
Strengthen the front end suspension on your vintage car—with a big assist from Scott Drake. These export braces are designed to tie in the shock towers to the firewall, reducing fatigue, cracking, and twisting of the chassis. Scott Drake manufactures these braces right from the original Ford blueprint, and they feature the correct deep draw stampings for added strength and an excellent fit. The steel shock and strut braces are available in a variety of finishes to complement your particular vehicle.
( 52 )
$86.59
Add some extra protection over your stock lap belts. Scott Drake race-style lap belts are designed based on the vintage race car look that dominated the '60s. Scott Drake manufactures these belts with a 3 in. belt, a quick release, and leather protective pads.
( 25 )
$95.15
Scott Drake drum brake hubs enable you to easily replace your worn-out parts with brand spankin' new steel plates. They are available with either four or five holes for wheel studs, depending on your vehicle.
( 3 )
$99.95
Scott Drake fire extinguisher mounts are approved for NHRA drag racing and can accept various sizes of automobile fire extinguishers. They're machined from 6061-T6 billet aluminum with a black anodized finish and a laser-etched logo. The mounts feature a red anodized quick-release knob and versatile mounting options. Mounting clamps are sold separately.
( 7 )
$91.45
Scott Drake water pump pulleys are 2-groove steel models with a painted black finish. They are needed when adding power steering to manual steering cars, and will fit specific engines with or without air conditioning. Keep your water pump turning and circulating coolant with the help of a new Scott Drake pulley.
( 1 )
$85.85
Getting a carburetor to respond properly is much easier when you have the correct length and style of accelerator rod. Scott Drake throttle linkage kits are an exact reproduction of the OE parts designed to install on vintage Mustangs. These kits typically include an accelerator linkage rod, return spring, bushings, and clip kit. They're constructed from heavy-duty materials for longevity and dependability. Choose the correct fuel linkage kit needed—for either a 4-barrel or 2-barrel engine. Whether retrofitting a Mustang or simply making some upgrades, car aficionados rely on classic Ford replacement parts from Scott Drake.
( 33 )
$58.55
Scott Drake crankshaft pulleys are designed from steel and painted black. These 2-groove crank pulleys are used when adding power steering to a manual steering car. Their 3-bolt design will fit 1965-68 289 and 302 engines. Notes: They will not fit later 302s unless the proper harmonic balancer is installed. Not for cars with A/C.
( 2 )
$99.95
There are a few unwritten rules that musclecar owners abide by—showcasing a strong exhaust note, a snazzy paint job, eye-catching wheels … and the perfect stance! For classic Mustang owners, in particular, Scott Drake rear-end lowering kits can help you achieve a level street look with the front-end. These leaf spring suspension blocks enable you to safely drop the backside by a full inch. No more need to heat your springs or remove the leafs! Scott Drake kits include cast aluminum lowering blocks, U-bolts, and nylock nuts. It's an easy adjustment that will make a noticeable difference both in appearance and in corner-handling performance.
( 29 )
$65.85
Engine components need room to function properly. Scott Drake transmission to block spacer plates provide sufficient area for your flywheel, starter, and ring gear operation. These steel plates are precision-cut for the correct fit in your classic car's engine. Not too little, not too much; Scott Drake spacer plates locate your engine components in just the right place.
( 54 )
$71.89
—
$91.45
Keep your muscle car up to speed with ignition switch wiring pigtails from Scott Drake. They allow you to efficiently and quickly repair your classic Mustang's ignition harness, with correct color-coded wires. These replacement pigtails look and fit like the original, saving you from having to purchase and install an entirely new harness. When your original ignition switch begins to malfunction, Scott Drake pigtails are often the easy and affordable repair solution.
( 12 )
$51.19
—
$57.29
Are you having trouble closing your car door? Scott Drake door latch assemblies can remedy that. Over time, most drivers have experienced a door that sticks or just won't latch properly. Sometimes it's just one small part of the mechanism that causes the entire assembly to fail. These affordable reproductions are made from stamped steel and are available for fitment on a variety of classic makes and models. Gain perfect closure with Scott Drake door latch assemblies.
( 11 )
$80.59
—
$92.65
Scott Drake outside door handles are direct fit replacements for your worn-out and faded parts. They include both left and right handles, as well as buttons, pads, hardware, and brackets.
( 34 )
$60.95
—
$97.55
These original looking seat belts by Scott Drake have the correct vintage look used by Ford on several car models in the middle to late '60s. Scott Drake uses the starburst medallion on the buckles and the belts come available in many color selections.
( 31 )
$60.95
—
$72.05
Scott Drake rubber pony floor mats are exact replicas of the original Ford floor mats. They are molded in colored rubber and feature the spikes on the backside to reduce mat sliding. Now you can keep your carpet clean and maintain a factory look at the same time!
( 23 )
$78.05
—
$85.35
Scott Drake offers replacement fan shrouds for a variety of muscle car applications from the 1960s and '70s. They're available in different sizes and materials, with easy bolt-on installation. Fan shrouds are a cooling system accessory that help to facilitate cool air flowing throughout your engine bay. Order the model designed to fit your vehicle.
( 77 )
$71.89
Scott Drake Motorcraft spark plug wire sets are made to factory specifications to give you a perfect fit and finish, just like your original spark plug wires. If you're looking to restore your ride and want high-quality spark plug wire replacements just like your originals, Scott Drake Motorcraft spark plug wire sets are just the ones for you.
( 4 )
$71.89
If shifting gears on your classic Mustang isn't as smooth as it was back in its heyday, one remedy could be a Scott Drake clutch pedal roller bearing rebuild kit. These small parts are an easy fix to reduce pressure on your clutch or brake pedal support bushings. The roller bearings allow for a free-moving pedal, and they'll last longer than standard bushings. A new shaft is included as a replacement if your original shaft is scored. Scott Drake clutch pedal roller bearing rebuild kits include: * Pedal shaft * 2 roller bushings * 4 spacer shims * Wave washer * 2 plastic bushings * 2 snap rings * Cotter pin
( 7 )
$78.05
Replace your worn-out and ugly door handles with Scott Drake. These Scott Drake interior door handles are excellent factory reproductions, ensuring a proper fit. They come available in a chrome or satin finish.
( 20 )
$69.49
—
$89.05
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
