Availability
An 883 to 1200cc Hooligan cylinder kit for a Harley-Davidson®, like the ones made by S&S Cycle, provides a significant increase in engine displacement, resulting in substantially more power and torque without requiring major engine modifications, making it a popular upgrade for riders seeking better performance on their Sportster 883, with benefits like increased horsepower—by boosting the engine size from 883cc to 1200cc, the Hooligan kit delivers a noticeable power gain, allowing for better acceleration and highway cruising capabilities. Typically these kits are designed as "bolt-on" upgrades, meaning they can be installed without needing extensive machining or engine rebalancing, making the process relatively simple and straightforward. Compared to a complete engine rebuild, a Hooligan kit is a cost-effective way to significantly improve your bike's power. When installing a Hooligan kit, it may be necessary to upgrade the clutch to handle the increased torque produced by the larger engine. Depending on the specific kit and your bike setup, you may need to adjust fuel injection mapping to optimize performance.
Not Yet Reviewed
$1,095.95
—
$1,999.95
With S&S Cycle's wide selection of Harley-Davidson® parts, you're sure to find the parts you're looking for, including head bolt kits. These kits include steel 12-point head bolts and washers that are designed to exceed the needs of your high performance engine.
( 1 )
$19.76
—
$137.66
S&S Cycle billet oil pumps are designed and built for your V-Twin. They feature a smoother design from beautiful strong billet and pressure relief towers that are .300 in. shorter than your OEM oil pump. Kits may include: * Pump with cover * Mounting bolts * Supply and return gears * Driveshaft with keys and snap rings * Check ball and spring * Pressure relief valve and spring * Check ball and release valve cover screws with O-rings * Miscellaneous hose fittings, plugs, screws, and gaskets
Not Yet Reviewed
$395.06
—
$398.66
S&S Cycle breather reed valve assemblies improve oil scavenging and reduce oil carryover. Plus, they'll make your bike run better. The steel breather reeds of these valve assemblies are normally closed. As they open and close again during the stroke cycle, a slight vacuum is maintained in the crankcase, greatly improving oil scavenging. Enjoy your riding experience even more after you install S&S Cycle breather reed valve assemblies.
Not Yet Reviewed
$147.56
S&S Cycle precision tappets are high performance replacements for S&S Cycle's previous standard and premium lifters for M8, Twin Cams, and late Sportster applications. Each precision tappet is hand assembled to exacting tolerances and designed for quiet operation and rapid pump up. Features and benefits: * Reduced valve train noise from start-up to shut down * Close tolerances for low leak-down rates * Fast pump up and superior high-rpm performance
Not Yet Reviewed
$251.96
S&S Cycle TC3 oil pump and cam plate kits are designed to deliver increased oil pressure and return scavenge volumes over your factory oil pump while providing increased rigidity and a pressure relief valve. The TC3 oil pump features three stages for consistent oil pressure, plus reliable scavenging, and the TC3 cam plate includes removable passage plugs for easy service. S&S Cycle TC3 oil pump and cam plate kit features include: * Precision CNC-machined forged aluminum * Adjustable oil pressure regulator adjusts without removing the plate from engine * Screens and magnetic traps help protect the scavenge rotors from debris * Special design allows S&S pumps to tolerate more pinion shaft runout without damage
Not Yet Reviewed
$753.26
S&S Cycle standard adjustable pushrods help to assure consistent valvetrain operation under all conditions. The pushrods are made from rigid chromoly steel tubing and offer a simple, trouble-free installation. You can purchase just the pushrods or as a set with pushrod covers, O-rings, and cover keepers. Replace the stock, non-adjustable pushrods in your stock or high performance application with S&S Cycle standard adjustable pushrods, available for a wide range of Harley-Davidson® bikes from 1984 and up.
( 1 )
$137.66
—
$279.95
S&S Cycle cylinder studs are the perfect replacement for your OEM or S&S cases. These steel head studs are black oxide coated and strong enough to use on the largest of V-twin engines. So next time you do a top end on your Harley-Davidson®, update those head studs with S&S cylinder studs.
( 1 )
$45.86
—
$55.76
S&S Cycle 110 in. Power Packages are the ideal combination of performance and savings to transform your Twin Cam HD without breaking the bank. Bump the early Twin Cam from late 96ci or 103ci to 110ci, as well as add matched cams/cam plate/oil pump and everything else a high performance cam chest needs to reliably make big power. Features: * 4 in. bore bolt on cylinder and piston kit * 10.5:1 compression * Wrinkle black finish * S&S 585 Easy Start cams in either gear or chain version * TC3 oil pump * TC3 cam plate * S&S cam chain tensioners or outer cam drive gears * Quickee adjustable pushrods with tubes * S&S precision tappets * Low-friction ductile cast iron liner * Bolts in with no machining, balancing, or splitting the crankcases * Cylinders fit to pistons--no machining required * All parts required to upgrade to gear drive cam or hydraulic tensioners in one easy to order part number
Not Yet Reviewed
$2,992.95
—
$3,121.16
S&S Cycle Late Twin cam chain drive cam chest upgrade kits contain everything needed to replace it all! Your engine will receive increased performance from the higher lifts, optimized camshaft timing, and from more consistent oil flow and pressure. Kits can be installed without the removal of your rocker box covers. They're available for a variety of Harley-Davidson© street bikes from 2006 and up. Kit components include: * Forged cam plate * Forged 3-stage oil pump * Premium lifters * Hydraulic chain tensioners * Quickee pushrods * Pushrod tubes * Chain drive camshafts * Inner camshaft bearings * All necessary gaskets, O-rings, and hardware
Not Yet Reviewed
$1,079.96
—
$1,854.86
S&S Cycle Late Twin Cam Easy Start chain drive cam chest upgrade kits contain everything needed to replace it all! Your engine will receive increased performance from the higher lifts, optimized camshaft timing, and from more consistent oil flow and pressure. Kits can be installed without the removal of your rocker box covers. Easy Start kits allow the stock starter to start any engine regardless of compression ratio! Order the kit recommended for your particular Harley-Davidson© street bike. Kit components include: * Forged cam plate * Forged 3-stage oil pump * Premium lifters * Hydraulic chain tensioners * Quickee pushrods * Pushrod tubes * Easy Atart chain drive camshafts * Inner camshaft bearings * All necessary gaskets, O-rings, and hardware
Not Yet Reviewed
$1,955.66
—
$2,529.95
S&S Cycle offers several Super Stock cylinder heads to choose from for your motorcycle. They feature premium valves and high flowing ports to supply your engine with plenty of air, as well as high performance valve springs that may allow installation of cams with up to .650 in. of lift (depending upon cylinder heads chosen). Super Stock cylinder heads are also available in different finishes. Select the ones designed for your bike.
Not Yet Reviewed
$1,428.26
—
$1,999.95
Easily installed, easily removed--S&S Cycle Quickee adjustable pushrods are designed for a simple, trouble-free installation that does not require removal of the gas tank, rocker assemblies, or even the rocker box cover! Innovative Quickees feature threaded adjusters that screw into the pushrods until the threads disengage and the adjuster simply slides into the pushrods, making your installation or removal easy. Then, once the pushrods are installed and adjusted, the locknut keeps the adjuster from moving. They will work with stock and aftermarket cams, as well as stock pushrod covers. S&S proven performance makes life easier with their Quickee adjustable pushrods.
( 1 )
$188.96
—
$303.26
S&S Cycle Super Stock cylinder head kits feature stock-appearing cylinder heads with improved performance. These heads work well with engines of stock displacement but are ideal for engines with a little larger stroke or bore. They are compatible with stock rocker boxes, intake manifolds, and exhaust. The S&S high-performance valve springs allow for camshafts with larger lifts. Super Stock aluminum cylinder head kits are available in multiple finishes depending on application and they contain all the parts needed for installation except where noted.
Not Yet Reviewed
$1,398.56
—
$1,999.95
S&S Cycle early Twin Cam chain drive cam chest replacement kits are designed to upgrade your early 1999-2006 Twin Cam to 2007-16 style camshafts and oil pump. Your engine will receive increased performance from the higher lifts, optimized camshaft timing, and from more consistent oil flow and pressure. Kits can be installed without the removal of your rocker box covers. Order the kit recommended for your specific Harley-Davidson© street bike. Kit components include: * Forged cam plate * Forged 3-stage oil pump * Premium lifters * Hydraulic chain tensioners * Inner and outer camshaft bearings * Quickee pushrods * Pushrod tubes * Available with or without chain drive camshafts * All necessary gaskets, O-rings, and hardware
Not Yet Reviewed
$1,499.95
—
$1,854.86
S&S Cycle forged piston and ring kits include your rings, piston pin, and circlips. S&S Cycle has many years of experience producing quality pistons for motorcycles. These piston kits provide strong, lightweight pistons with optimized designs that improve engine efficiency and maximize your torque and throttle response.
( 1 )
$364.95
—
$540.95
S&S Cycle 107 in. big bore kits are easy to install and require no machining or re-balancing. These are the largest bores that can be fit in your stock engine case. This is the largest bore that can be fit in a stock engine case. Stock engine height is maintained so there are no manifold or frame fitment issues. Using an 11-fin design, the pre-finished cylinders closely resemble the OEM shape and are ready to install. Take your stock engine case as big as it'll go with S&S Cycle 107 in. big bore kits! Product features include: * CP pistons feature a 3cc pop-up dome for slightly higher compression * Cylinders feature an increased fin area for better heat dissipation * Centrifugal cast gray liner features 40,000 psi tensile strength for superior wear and performance
Not Yet Reviewed
$1,175.36
On top of being constructed from superior materials, S&S Cycle's Evolution cylinders have thicker castings, larger cooling fins, and better wear resistance than stock cylinders. The design, finish and workmanship of these replacements corresponds to the stock counterparts that they replace. The cylinders feature ductile cast-iron sleeves in aluminum castings and are available in natural or black powdercoat finish to match OEM components. Individual cylinders and cylinder sets without pistons are bored slightly under size and are not honed, so they may be finish-honed to fit your pistons. Select the cylinders designed to fit your specific Harley-Davidson® model.
Not Yet Reviewed
$815.95
—
$1,499.95
Tap into the power of your Milwaukee 8 engine by installing an S&S Cycle camshaft. These kits will increase the torque and horsepower of your bike. They include all required gaskets, O-rings, bearings, and hardware. Order the model recommended for your Harley-Davidson® application.
Not Yet Reviewed
$211.46
—
$2,193.95
S&S tappet cuffs capture the tappets without impacting vertical motion and keeping them perfectly aligned, even in high-stress, high-rpm situations. Factory tappet guides are constructed of plastic and are at risk for allowing the tappets to twist under heavy stress. S&S Cycle tappet cuffs offer proven performance as they're made from billet aluminum and are more durable than your old, stock plastic guides.
Not Yet Reviewed
$76.46
S&S Cycle early Twin Cam gear drive cam chest replacement kits are designed to upgrade your early 1999-2006 Twin Cam to 2007-16 style camshafts and oil pump. Your engine will receive increased performance from the higher lifts, optimized camshaft timing, and from more consistent oil flow and pressure. By eliminating the chains, gear drive camshafts keep the valve events at precise timing and free up parasitic loss. Order the kit recommended for your specific Harley-Davidson© street bike. Kit components include: * Forged cam plate * Forged 3-stage oil pump * Inner and outer gear * Premium lifters * Quickee pushrods * Pushrod tubes * Available with or without gear drive camshafts * Inner camshaft bearings * All necessary gaskets, O-rings, and hardware
Not Yet Reviewed
$1,499.95
—
$2,010.56
S&S Cycle Super Stock generator-style crankcases for Big Twin engines with stock bores are designed with a stock-like appearance and incorporate updated design features that improve overall engine strength and reliability. Select the crankcase to fit your engine. Features and benefits: * Pre-clearance for strokes up to and including 5 in. * Motor mounts on crankcases for knucklehead engines are machined to fit stock 1936-47 frames. An adapter plate is included for 1948 and later-style frames * All cases are designed for late style generator, two brush type with 5/16 in. mounting bolts to eliminate early generator cradle/mounting strap bosses for simplicity and economics * Timken sprocket shaft main bearing, in all years, instead of stock-straight roller bearings; resulting in better flywheel assembly stability, placement and longer engine life * Kits include crankcase assembly, all required hardware and bearings for installation Note: All S&S crankcases use Timken style sprocket shaft bearings and 1958 and later pinion bearings. These cases will not accept stock 1957 and earlier flywheel assemblies.
Not Yet Reviewed
$1,937.66
S&S Cycle Early Twin Cam chain drive camshaft kits are an affordable way to increase performance. These kits allow you to reuse many stock cam drive components, saving you money on parts. Complete kits include the cams, gear cover gasket, cam bearings, and instructions. Go with the less expense and more performance of S&S Cycle Early Twin Cam chain drive camshaft kits.
Not Yet Reviewed
$377.06
—
$386.96
Inspired by S&S Pro Stock drag race engines, S&S Cycle 4 in. Sidewinder big bore kits utilize a ductile cast iron liner wrapped in cast aluminum for optimum thermal conductivity and performance. These bolt-in kits do not require machining, re-balancing, or engine removal, and include just about everything you'll need to complete the installation. S&S Cycle 4 in. Sidewinder kits offer the biggest cylinder bore that can be installed in a stock crankcase without machining! Features: * Low-friction ductile cast iron liner * 10.5:1 compression * Bolts in with no machining, balancing, or splitting the crankcases * 88 in. engines are boosted to 100 in. * 96 in. and 103 in. engines are boosted to 110 in. * Complete kits include cylinders, pistons, gaskets, and instructions * Wrinkle black and silver cylinders that match stock finish
Not Yet Reviewed
$1,395.86
—
$1,435.46
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
