Availability
Do you have a custom wiring project or just need to repair some cable ends on your daily driver? Regardless, these Ron Francis Wiring cable lugs are sure to get the job done. These high-quality tinned copper cable lugs are available in several different configurations, depending on your needs and application. These Ron Francis Wiring cable lugs will make your battery cable installation fast and easy.
( 16 )
$10.73
Are you still using the original-style push to start buttons? Ron Francis Wiring push button switches are super-nice replacements. These clean, simple momentary start buttons are perfect for your early model cars and trucks. And they come with double contacts to fit all applications! Start your ride the cool way--with a push from Ron Francis Wiring starter button switches.
( 9 )
$22.49
Poor engine grounds are the leading cause of ignition problems. Get extra protection for grounding the engine and frame together with high-quality, heavy-duty ground straps from Ron Francis Wiring. Installed between the engine block and chassis, these ground straps ensure the proper grounding of the coil and spark plugs for sure ignition. They are a must for computer-controlled cars.
( 4 )
$20.53
Ron Francis Wiring insulated power studs help you get charged! These glass-filled nylon constructed studs include nuts, washers, and stud covers--a red cap for positive and a black cap for negative. These stud-type junctions have a maximum current load of 250 amps. Use insulated power studs from Ron Francis Wiring to help you do your wiring job right.
( 12 )
$21.51
Ron Francis Wiring flexible braided wire covers allow for complete coverage, even around inline plugs, connectors, and splices. These wire covers feature a unique split, semi-rigid, braided construction, which makes for a clean, uniform installation by gripping all of the wires tightly and closing around them with about 30 percent overlap. This time-tested product comes in various lengths and sizes and is even UV-resistant. It cuts easily with a hot knife and is rated at approximately 260 degrees F.
( 63 )
$17.59
Ron Francis Wiring neutral safety switch connector pigtails are designed to be factory or performance replacements. Order the model recommended for your vehicle make--and let Ron Francis meet all of your wiring needs.
( 43 )
$10.77
Steering column dimmers on a classic car? No way! Ron Francis Wiring floor dimmer switches keep your street rod or hot rod true to style. These floor dimmers are universal models to take you from high to low and back again in any ride. Floor models are available with a switch, housing, and terminals. Or, choose the switch-only model if you have a Ron Francis wiring kit, as the pre-wired plug is included in the harness! Put the headlight dimmer switch where it belongs--on the floor--with Ron Francis Wiring floor dimmer switches.
( 7 )
$18.57
—
$21.51
Are you in a jam with your car door and interior lights? Door jamb switches from Ron Francis Wiring are the right fix. Their switches are easy to install and are available for several applications. Ron Francis offers self-tapping, self-adjusting styles for applications requiring no ground to the body and GM styles, plus replacement switches for your Ford and universal switches with two contacts for vehicles needing a ground wire. Make sure that your lights come on and go off on cue with door jamb switches from Ron Francis Wiring.
( 4 )
$17.59
—
$18.57
Ron Francis Wiring zip looms can withstand high temperatures and are offered in various sizes to suit your needs. These high-temp zip looms are flexible conduits that protect your wiring and offer a sleek, finished appearance by concealing unsightly wires and cable runs. Whether you use them for your auto, under a workstation, or in an integrated home theater setup, these high-temp zip looms are up to the challenge! They're a cinch to install--just open the tube along the slit and insert the wires. It's really that easy!
( 8 )
$20.53
Get quick connections with Ron Francis Wiring quick connectors. Their connector housing is supplied with the correct brass contacts fitted properly and works best with 18-14 gauge wire. Ron Francis quick connectors include everything necessary for one joint. Wire up quality connections for quick access with Ron Francis Wiring quick connectors.
( 9 )
$10.73
—
$16.61
Ron Francis wiring bulb contacts are key components that most people overlook. The bulb contacts are crimped to the wire ends after they have been inserted into your lamp sockets. They make contact with the base of the bulbs to light your world. The bulb contacts work with either double or single-filament bulbs. Order the bulb contacts for your application needs.
( 8 )
$12.69
—
$22.49
Get a weatherproof seal with Ron Francis Wiring Weatherpack connector kits. These economical kits are available in a variety of configurations for 14- to 20-gauge cable—and include terminals, pins, and connectors. Make your wiring quick, easy, and waterproof with Ron Francis connector kits.
( 6 )
$10.73
Finish off your cable connection with these Ron Francis Wiring cable stud boots. They are the correct size for your master battery disconnect switch and jumper cable connections. Simply slide them on before you connect the cable end, and then slide them back over for a clean, finished-off look. Ron Francis Wiring cable stud boots are manufactured from quality materials and come in red for quick, easy identification.
( 3 )
$12.69
Eliminate splicing with Ron Francis Wiring double row terminal blocks. These high-quality, high-amperage, plated brass screw terminal strips provide you with enough connections for your automotive electrical work. The blocks are available with 4, 6, or 10 connections. Gather all of your wires together in one block with help from Ron Francis Wiring double row terminal blocks.
( 6 )
$22.49
Ron Francis Wiring vehicle speed sensor pigtails connect your VSS and transmission. They're available for later version GM transmissions and Ford vehicle speed sensors. Get the best performance with VSS pigtails from Ron Francis Wiring.
Not Yet Reviewed
$10.73
Are you looking to put something else in place of that old fusible link? If so, then these Ron Francis Wiring replacement AMG fuses are just what you need. Available in several different amp ratings, these heavy-duty Ron Francis Wiring replacement AMG fuses can be placed in a fuse holder (available separately) and provide a safe and clean looking setup for your vehicle's main power feed.
( 1 )
$13.67
Wiring is a key component in a conversion or restoration. Plan ahead and partner with Ron Francis Wiring. Their intake air temperature extensions are necessary items when you're swapping late model 4.6 Cobra mass airflow meters or relocating the IAT sensor. Don't be left scratching your head--turn to Ron Francis Wiring and their intake air temperature extensions.
Not Yet Reviewed
$14.65
These terminals from Ron Francis Wiring are made of brass and are a must for any garage or shop. They come in your choice of male or female ends.
( 7 )
$11.71
Wire your extras with Ron Francis Wiring single row terminal blocks. These high-quality, high-amperage, plated brass screw terminal strips provide you with enough connections for your automotive electrical work. Available in 4 or 8 connections, these terminal blocks use special narrow-width terminals. Gather your wires together in one block with help from Ron Francis Wiring single row terminal blocks.
Not Yet Reviewed
$14.65
—
$18.57
Has your relay gone bad? These Ron Francis Wiring replacement relays are just what you need. These high-quality relays are made to exceed OEM specifications for accurate and maintenance-free operation. These Ron Francis Wiring replacement relays are sure to get your electrical system functioning properly again.
( 2 )
$13.67
Ron Francis Wiring reverse lockout connector pigtails fit reverse lockout solenoids on various transmissions. Order the model recommended for your application.
Not Yet Reviewed
$10.73
Ron Francis Wiring race-ready toggle switches handle up to 20 amps, and can use RFW's new safety cover to prevent accidental switch activation. The toggle switches feature an attractive, short rounded paddle with factory nut and bezel.
( 2 )
$18.57
Ron Francis Wiring Potluck pigtails make maintenance easier. These pigtails can make switches disconnect for easy servicing or tie in-dash components. They have everything that you need for one joint, with locking bodies and housings fitted with correct brass contacts, properly machined installed on GXL wire. The wires are 3 ft. long—and are available in a variety of pin counts. Connect your project with Potluck pigtails from Ron Francis Wiring.
( 15 )
$18.57
Modal Header