Availability
Swap your 2.3 turbo into another Ford with Ford 2.3 turbo EFI engine swap wiring harnesses from The Detail Zone. Great for replacing factory-equipped 2.3 turbo vehicles as well, these partially wrapped TDZ wiring harnesses come complete with circuits for the electric fan, fuel pump, diagnostic port, check engine light, water temperature/oil pressure, and alternator. And, to make your install easier, a firewall grommet, instructions, and enough high-temperature zip loom and harness wrap tape are included. Make a swap or replace an existing harness with The Detail Zone Ford 2.3 turbo EFI wiring harnesses.
( 2 )
$676.15
The Detail Zone offers EFI wiring for your Cobra replicas, hot rods, and street rods. Their Ford 5.0 EFI universal fit wiring systems are stand-alone Ford fuel injection harnesses that come partially pre-wrapped. These semi-finished harnesses come with enough high-temperature zip loom and harness wrap tape to complete the job, once you verify lengths and layout. Detail Zone Ford 5.0 universal systems work with mass airflow equipped 302 and 351 engines, and where the ECM is placed behind the dash. The systems include a firewall grommet and complete instructions. Do you want fuel injection for your kit car or hot rod? Try Ford 5.0 EFI universal fit wiring systems from The Detail Zone.
( 15 )
$676.15
Wire up your classic Mustang or early Bronco for fuel injection with Ford 5.0 EFI direct-fit wiring systems from The Detail Zone. These stand-alone Ford fuel injection harnesses are finished off with high-temperature zip loom and harness wrap tape. Ford 5.0 wiring systems work with mass airflow equipped 302 and 351 engines. You get firewall grommets and complete instructions to make the installation trouble-free. Make a fuel injected stallion out of your ponies with The Detail Zone Ford 5.0 EFI direct fit wiring systems.
( 2 )
$744.75
The Detail Zone Telorvek Ford 5.0 Coyote EFI wiring harnesses make wiring your project easier. These wiring kits come with all of the sensor connections pre-installed on color-coded and printed wire, which attaches to the engine and transmission using the factory ECM. TDZ Telorvek harnesses create an exceptionally neat installation, along with the advantages of superior troubleshooting. The EFI systems include detailed instructions, and will support manual and 6R80 automatic transmissions. Trust Telorvek from Ron Francis and The Detail Zone to wire your next EFI project.
Not Yet Reviewed
$1,309.95
Take control of your Ford wiring job with Telorvek Ford 2.3 turbo EFI wiring harnesses from The Detail Zone. Featuring the Telorvek panels, these harnesses are your solution for a professional looking job and a trouble-free start-up. Detail Zone includes everything you need to get your ride to run like factory. Correct Ford connections, terminals, and 20 ft. of fire-resistant wire for each sensor--no predetermined wire lengths--are enclosed, allowing you to place the ECM anywhere you desire! You're in control with a centrally located panel, step-by-step instructions, and printed wire. Get a guess-free install with Telorvek Ford 2.3 turbo EFI wiring harnesses from The Detail Zone.
Not Yet Reviewed
$739.85
Swap out or replace an existing harness on your 1987-88 Ford Thunderbird Turbo Coupe 2.3L turbo with Ron Francis Wiring's direct replacement Ford 2.3L turbo EFI injector harnesses. These harnesses are factory-dimensioned, and come with circuits for the electric fan, fuel pump, diagnostic port, check engine light, water temperature/oil pressure, and alternator. They're also emissions-compliant for an OBD-I system. To make installation trouble-free, the harnesses come complete with instructions, and include assorted 300 degree F wire looms, harness wrap, and zip ties (not bare wire) for a finished look and protection.
Not Yet Reviewed
$156.75
Ron Francis Wiring TPI cold start injector plugs are designed to cap off the cold start injector, since the part is not needed when converting to a speed density system. Available in assorted designs, these plugs are manufactured from quality materials and install with no modification.
Not Yet Reviewed
$15.63
—
$22.49
What a great engine! What a mess of wiring! Telorvek GM Ram Jet wiring harnesses from The Detail Zone will clean up your engine bay! These replacement wiring harnesses let you move the controller and other components off of the intake. The Detail Zone Telorvek Ram Jet wiring systems can be used with any non-computer controlled transmission and include an optional O2 sensor and speed sensor wiring. TDZ wiring systems feature the necessary connectors with 20 ft. of fire-resistant, printed wire, so there's no guessing where they go, and adjustment of the wire lengths is easy for a super-neat installation. Plus, since everything plugs into the Telorvek panel, you can move your controller almost anywhere. These systems fit first generation GM crate engines with MEFI-3, or second generation with MEFI-4 controllers. Get rid of the fuel injection bird's nest! Replace it with The Detail Zone Telorvek GM Ram Jet wiring harnesses--great wiring for a great engine!
Not Yet Reviewed
$568.35
—
$617.35
Around for over 15 years, the Telorvek panel design is a link between the engine sensors and computer, allowing the adjustment of wire lengths to create an exceptionally neat installation, plus the advantage of superior troubleshooting and the ability to mount the computer anywhere inside the vehicle. When it comes to EFI wiring, Telorvek is the name to trust. The Detail Zone Telorvek GM LS Vortec EFI wiring harnesses give you full control over your wiring job. Designed for coil-on-plug based LS-1 iron block engines found in most Chevy and GM trucks and SUVs, the kits include the correct, new GM connectors as required, along with crosslink, fire-resistant wire. Each kit has 20 ft. of wire for each sensor allowing you to cut to the proper length, and the wires are color-coded and printed with the sensor and terminal they connect to. Telorvek systems are fully functional, closed loop system, which allows the engine to run like factory. Due to the complex anti-theft found in these computers, your ECM will need reprogrammed. The Detail Zone can provide a host of other services on the ECM, including removing all the emissions. Key features: * Telorvek panel is stainless steel construction * High-quality SAE relays and connectors * Color-coded and labeled wires * Simple, straightforward instructions * Sensor connections pre-installed * ECU reprogramming available (sold separately) * Perfect for engine swaps, hot rod, GM vehicles, and track cars
Not Yet Reviewed
$1,131.85
The Detail Zone puts you in control of your Ford wiring job with their Telorvek Ford 4.6/5.4 V8 Modular EFI wiring harnesses. Your 4.6 or 5.4 V8 Modular-powered ride will run like factory with these TDZ fully functional, closed-loop, fully scannable wiring systems. Installation starts with the Telorvek panels--your centrally located link between your engine sensors and computer. Detail Zone supplies all of the correct and necessary connections, terminals, and 20 ft. of fire-resistant wire--no predetermined wire lengths! Not only will you have plenty of length, but all wires are printed with sensor and terminal information, so there's no guessing which is which or where it goes! You'll have no more long hours spent tracing circuits, cutting, or soldering. The Telorvek panel is capable of being used as a breakout box required for diagnostic procedures to take voltage readings of different circuits. Take control of your project for a guess-free install and a trouble-free start-up with The Detail Zone Telorvek Ford 4.6/5.4 V8 Modular EFI wiring harnesses.
( 3 )
$1,131.85
—
$1,283.75
Wire your hot rod your way with The Detail Zone Telorvek EFI wiring harnesses for GM LS1—because TDZ Telorvek fuel injection systems offer freedom, flexibility, and factory operation! They provide freedom of wire routing to fit your needs, the flexibility to choose almost any location you desire for your ECM, and the factory run of a complete closed loop system with diagnostic scan tool connections and MIL circuits for OEM scanning. The Detail Zone EFI wiring systems include all of the correct and necessary GM connectors and 20 ft. of printed wire for each sensor. They are easy to install—simply attach them to the sensors, correct the length, install the terminals, and connect them to the Telorvek panel. The panel's factory installed connectors allow you to plug right into your ECM!
Not Yet Reviewed
$1,131.85
The Detail Zone Telorvek GM LT1 EFI wiring harnesses offer freedom, flexibility, and factory performance. And TDZ Telorvek panels are the heart of your professional wiring job--the connection between your engine sensors and computer. Freedom: GM sensor connectors are factory installed to 20 ft. lengths of wire for easier routing. You plug the connector into the sensor, run the wires to the Telorvek panel that has factory installed connectors, and then plug them into the factory computer. Flexibility: These Detail Zone systems allow the ECM to be put almost anywhere you desire! Factory: All systems are complete and operate the engine in a closed loop--like the factory units, with comparable gas mileage and drivability! Trust Telorvek GM LT1 EFI wiring harnesses from The Detail Zone for a neat installation and excellent operation.
Not Yet Reviewed
$945.65
—
$1,019.15
Dress your Vortec V6 engine with The Detail Zone Telorvek GM Vortec CPI EFI wiring harnesses. These installer-friendly EFI wiring harnesses let you choose the locations of components and suit up your ride with a neat, professional look. Based on the TDZ Telorvek panel, these GM Vortec CPI systems allow you to install the computer just about anywhere in the vehicle. The sensor connectors are factory installed to 20 ft. lengths of wire. You plug the connector into the sensor and run the wires to the panel that has factory installed connectors to plug into the factory computer. And the fire-resistant wires are printed with sensor and terminal information! You get everything that your engine needs to run like the factory units with the advantage of simplified troubleshooting. Give your ride a perfect-fit wiring system with performance that's comparable to factory systems. Outfit your ride with The Detail Zone Telorvek GM Vortec CPI EFI wiring harnesses.
Not Yet Reviewed
$754.55
Telorvek harnesses from The Detail Zone are your links to GM EFI wiring! Their GM TPI with MAF fuel injection kits are an excellent choice for modified Chevy tuned port engines with mass airflow. At the heart of these Detail Zone EFI systems are the Telorvek panels--your link between your engine sensors and computer. These wiring harnesses provide all of the correct GM connectors necessary and 20 ft. of crosslink printed fire-resistant wire for each sensor. You trim them to length, install the terminals, and connect them to the Telorvek panel. You'll finish with a neat, professional installation, plus superior troubleshooting abilities and the flexibility to place the ECM almost anywhere--under your front seat, rear seat, or even the trunk! And TDZ fuel injection harnesses run like the factory units! Do you have a larger cam or higher compression? Get the perfect link to an excellent wiring job with Telorvek GM TPI wiring harnesses with MAF EFI from The Detail Zone.
Not Yet Reviewed
$695.75
The Detail Zone Telorvek Ford 5.0 EFI wiring harnesses are for 5.0s. Are you tired of tracing circuits, cutting, and soldering? TDZ Telorvek fuel injection wiring systems provide all that you need, plus plenty of wire and instructions for a neat and professional looking job. Detail Zone systems supply you with the necessary Ford connectors with fire-resistant, printed wire--20 ft. for each sensor! And since they're printed with sensor and terminal information, there's no guessing or hours spent trying to figure out where they go! Simply plug them into the sensors, cut them to length, attach the terminals, and connect them to Telorvek panel, which then connects to the ECM. Complete closed loop systems allow your engine to run like the factory units. Diagnostic scan tool connections and MIL circuits are included, and you can also use the panel as a breakout box to take the voltage readings of different circuits. Free yourself from exhausting hours of checking for the right wires--wire your ride with The Detail Zone Telorvek Ford 5.0 EFI wiring harnesses.
( 1 )
$764.35
—
$1,131.85
Around for over 15 years, the Telorvek panel design is a link between the engine sensors and computer, allowing the adjustment of wire lengths to create an exceptionally neat installation, plus the advantage of superior troubleshooting and the ability to mount the computer anywhere inside the vehicle. When it comes to EFI wiring, Telorvek is the name to trust. The Detail Zone Telorvek Ford 3.5 Ecoboost EFI wiring harnesses come with all the sensor connections pre-installed on color-coded and printed wire which attaches to the engine and transmission using the factory ECM. These harnesses support manual and 6R80 automatic transmissions and come with detailed instructions as well as tech support. Please note: In 1996, Ford began installing Passive Anti-Theft Systems (PATS) in their ECMs. Short of installing all the components and sensors from the donor vehicle, the only way to defeat PATS is through an ECM reprogramming (sold separately).
Not Yet Reviewed
$1,283.75
The Detail Zone Telorvek Ford 5.0 wiring harnesses with MAF EFI make your wiring jobs easier. Are you tired of tracing circuits, cutting, and soldering? TDZ Telorvek fuel injection wiring systems provide all that you need, plus plenty of wire and instructions for a neat and professional looking job. All Detail Zone fuel injection systems supply you with the necessary Ford connectors with fire-resistant, printed wire--20 ft. for each sensor! Simply plug them into the sensors, cut them to length, attach the terminals, and connect them to the Telorvek panel, which then connects to the ECM. The systems are complete, operate the engine in a closed loop, and include diagnostic scan tool connections and MIL circuits so that your engine runs like factory and can be scanned. Also, this design allows you to use the panel as a breakout box to take voltage readings of different circuits. Free yourself from exhausting hours of checking for the right wires--wire your ride with The Detail Zone Telorvek Ford 5.0 wiring harnesses with MAF EFI.
Not Yet Reviewed
$793.75
The Detail Zone Telorvek Ford 5.8 EFI wiring harnesses make wiring your project easier. These wiring kits come with all of the sensor connections pre-installed on color-coded and printed wire, which attaches to the engine and transmission using the factory ECM. TDZ Telorvek harnesses create an exceptionally neat installation, along with the advantages of superior troubleshooting. The EFI systems include detailed instructions, and are set up for speed density. Trust Telorvek from Ron Francis and The Detail Zone to wire your next EFI project.
Not Yet Reviewed
$1,156.35
The Detail Zone Telorvek GM truck TBI EFI wiring harnesses will make wiring your engine easier. These wiring kits come with all of the sensor connections pre-installed on color-coded and printed wire, which attaches to the engine and transmission using the factory ECM. TDZ Telorvek harnesses create an exceptionally neat installation, along with the advantages of superior troubleshooting. The EFI systems include detailed instructions, and include the necessary wiring for electronic transmissions. Trust Telorvek from Ron Francis and The Detail Zone to wire your next EFI project.
( 1 )
$793.75
—
$828.05
Do you need to wire your turbocharged ride? The Detail Zone Telorvek Buick 3.8 turbo EFI wiring harnesses are your best solution. These closed-loop Buick systems are fully functional and scannable. All Detail Zone EFI wiring harnesses feature Telorvek panels. They are your convenient central location for wiring fuses and relays, plus everything you need for runs-like-factory circuitry, including connectors, terminals, and fire-resistant wire--20 ft. per sensor! And the wire is printed with sensor and terminal information, so there's no guessing where it goes! In the Buick Grand National, this engine took the street racing scene by storm. Make sure that the attention your ride receives isn't due to a bad wiring job. Do it right with professional results and Telorvek Buick 3.8 turbo EFI wiring harnesses from The Detail Zone.
Not Yet Reviewed
$754.55
The Detail Zone Telorvek GM 4.6 Northstar EFI wiring harnesses will make wiring your Cadillac engine easier. These wiring kits come with all of the sensor connections pre-installed on color-coded and printed wire, which attaches to the engine and transmission using the factory ECM. TDZ Telorvek harnesses create an exceptionally neat installation, along with the advantages of superior troubleshooting. The EFI systems include detailed instructions, and include wiring for injectors and MAP sensor. Trust Telorvek from Ron Francis and The Detail Zone to wire your next EFI project.
Not Yet Reviewed
$1,019.15
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
