Availability
Rigid Industries A-Series Low Power Lights are universal lights that can be used just about anywhere and throw out a whopping 200 raw lumens to help you see in the dark! Vehicle cabs, boat cabins, work vehicle beds, under hoods, or in trunks are just a few of the places where the A-Series can provide handy, bright lighting in otherwise dark places. They feature durable compact aluminum housings and include rubber, flat-mount, 3M VHB 2-way pads for flat-mounting, and radius tube-mount adapters, that provide side or bottom wire exits to accommodate different applications. They are lightweight, waterproof, and available in a variety of LED colors. The versatility of A-Series lights makes them an easy installation on almost anything.
Not Yet Reviewed
$101.99
Rigid Industries A-Series High Power Lights are universal lights that can be used just about anywhere and throw out a whopping 400 raw lumens to help you see in the dark! Vehicle cabs, boat cabins, work vehicle beds, under hoods, or in trunks are just a few of the places where the A-Series can provide handy, bright lighting in otherwise dark places. They feature durable compact aluminum housings and include rubber, flat-mount, 3M VHB 2-way pads for flat-mounting, and radius tube-mount adapters, that provide side or bottom wire exits to accommodate different applications. They are lightweight, waterproof, and available in a variety of LED colors. The versatility of A-Series lights makes them an easy installation on almost anything.
Not Yet Reviewed
$111.99
Rigid Industries 3-wire 360 Series light wiring harnesses are designed to connect one pair of 360 Series lights to your 12 V electrical system. Rigid 3-wire 360 Series light harnesses feature: * Battery terminal connectors * 3-position switch (on/off/backlight on only) * Fuse holder with a 20 amp fuse * 60 amp 14 V DC relay * Flying leads for universal fitment * 10 ft. (3.05 meters) * Compatible with the 360 Series 4 in and 6 in. family of lights * Use for backlight versions only--not for SAE versions
Not Yet Reviewed
$109.99
Rigid Industries LED flasher units are offered in 12 and 24 V. They feature a waterproof housing and can flash one complete 10 in. and smaller section or two separate sections that don't exceed 10 in. They include wiring instructions for a simple installation and are capable of seven different patterns.
Not Yet Reviewed
$85.99
Clearance
Rigid Industries A-pillar bar light mounts are designed to allow you to mount D-Series, SR-M, SR-Q , or Q-Series LED lights to the A-pillars of your vehicle. They compensate for the forward angle of the A-pillar, making it easier to position your LED lights. The single "clamp" UTV mounts are constructed of black anodized billet aluminum; while the full Q-Series kit brackets are black anodized stainless steel—built for certain Jeep models . The kits allow you to mount an LED light (not included) to each of your A-pillars. For an aggressive look and better light for off-road or nighttime driving, choose the size and style mounts needed for your specific application.
Not Yet Reviewed
$108.99
—
$154.99
$61.50
—
$84.50
Clearance
Rigid Industries LED light bar roof mounts allow for a clean installation of Rigid's high-output LED lighting. These roof mounting kits fit their 40 in. SR-Series PRO straight LED light bar. They are made with stainless steel and covered with UV and abrasion-resistant powdercoat to ensure years of use in the harshest conditions. "Own The Night" with Rigid LED light bar roof mounts.
Not Yet Reviewed
$179.99
—
$184.99
$92.50
—
$94.50
Rigid Industries D-Series mounting brackets allow you to mount your D-Series LED lights below the windshield. They are made of high-quality stainless steel and powdercoated black. Patented hybrid and specter systems, along with state-of-the-art electronic technology, make Rigid Industries LED products second to none. These easy-to-install Rigid Industries D-Series mounting brackets are exactly what you need to add some LED lights to your ride.
Not Yet Reviewed
$67.99
—
$97.99
Complement your Rigid Industries cowl mount with a cowl mount standoff kit. The standoffs are designed to move your lights up and away from the cowl, giving you more complete lighting options. Rigid standoffs are made from laser-cut stainless steel and have been powdercoated allowing for a clean sleek look that only Rigid Industries can provide. Don't live in the dark when you can own the night with the help of Rigid Industries cowl mount standoff kits.
Not Yet Reviewed
$93.99
Rigid Industries Adapt Stealth mounting kits provide another way to mount your light bar. Compatible with the Adapt light bars, these underside, low-profile mounts feature 100 percent stainless steel construction covered with UV- and abrasion-resistant powdercoat to ensure years of use in the harshest conditions. Instead of mounting from the ends of the light bar, mount from the underside where the brackets are less likely to be seen using Rigid Adapt Stealth mounting kits.
Not Yet Reviewed
$89.99
Rigid Industries headlight conversion harnesses are 16-gauge, wire-encapsulated circuitry, which connects to 7 in. round standard H4 LED headlamp connectors. Rigid is committed to providing innovative technologies and always guarantees a quality product.
Not Yet Reviewed
$55.99
Experience high-powered LED lighting in a completely new way with Rigid Industries Ignite LED flush-mount lights. These auxiliary units are Rigid's smallest forward-projecting lights, delivering big output in a compact package. They're perfect to install where space or appearance is a concern. Their flush-mount design allows for unlimited mounting options, while also adding flexibility during installation. Rigid Industries Ignite LED flush mount lights are available in spot, flood, and diffused beam options.
( 2 )
$104.99
—
$106.99
Clearance
Rigid Industries A-pillar mount kits give you the option to add any of Rigid's pod lights to the A-pillar mounting location on your vehicle. The brackets use bolt hardware for mounting, no drilling or cutting required. They will give your vehicle a clean, from-the-factory look and allow you to position your lights in the direction you need. These durable stainless steel brackets feature a UV and abrasion-resistant black powdercoat finish to match vehicle's trim and the Rigid Industries pod lights. This the brackets only. Lights not included.
Not Yet Reviewed
$181.99
$81.50
This Rigid Industries 3-position switch is a custom switch for the Adapt XE dirt bike LED light—and features three settings: on, off, and Adapt modes. The switch is designed to easily mount to the handlebars and allows the Adapt XE LED light to run in either "On" or GPS-driven Adapt mode.
Not Yet Reviewed
$100.99
Let there be light! Radiance multi-trigger harnesses from Rigid Industries make the installation of your Rigid Industries Radiance Series pod lights as simple and clean as possible. Features: * Circuit one: designed for primarily projecting LEDs (same 18 awg wire for primary and backlighting) * Circuit two: designed for backlighting circuit * Integrated fuse holder to protect both circuits * Two backlit LED rocker switches included for independent on/off of primary LEDs and backlighting * Three connectors with built-in shrink ends to be used for splicing in the pigtail * Radiance Series pod light and sets sold separately
Not Yet Reviewed
$84.99
Get big light out of Rigid Industries smallest forward projecting lights with Rigid Industries Ignite LED surface mount lights. These lights utilize off-the-shelf GoPro-style mounting brackets for almost limitless mounting applications. With less than a 1 amp draw, these Rigid Industries Ignite LED surface mount lights put out 1,000 raw lumens and are available in spot, flood, or diffused beam patterns.
Not Yet Reviewed
$103.99
Rigid Industries Chase 28 in. LED light bar rear tube mounts feature a UV- and abrasion-resistant polyester powdercoat. The tube mounts are made from cast aluminum and fit 1.5 to 2 in. tubes. Tube mounts, mounting brackets, and hardware are included; lights sold separately. Professional installation is recommended. Own the night with Rigid Chase bar mounts for virtually any rear-facing application.
Not Yet Reviewed
$81.99
Rigid Industries fog mounts are designed to provide a clean look when adding LED lights to your ride. Each mount is specially designed to fit your vehicle and is made of stainless steel with an abrasion-resistant black powdercoat to ensure durability. Own the night with Rigid Industries fog mounts.
Not Yet Reviewed
$95.99
Rigid Industries bumper light bar mounting brackets are designed to bring aggressive, rigid styling to your ride. They're made of high-quality stainless steel that's powdercoated black to deliver long-lasting durability and performance. The brackets are available in a variety of styles for different vehicles—and include all necessary hardware for a clean, easy installation. Want to add some amazing lighting to your ride? Rigid bumper light bar mounting brackets are the perfect way to get it done.
Not Yet Reviewed
$87.99
Rigid Industries' custom 70 In. wiring harness is specifically designed to connect their Adapt XE LED moto light and switch to your bike's electrical system. It features battery terminals on one end and bullet connectors on the other to connect the light to the custom 3-position switch. Also included is a blue wire with insulated butt connector to power the light and switch, plus an inline 15 amp fuse holder.
Not Yet Reviewed
$61.99
Rigid Industries light bar wiring harnesses are designed to connect a single LED light bar to your 12 V electrical system. These light bar wiring harnesses feature battery terminals on one end and a Deutsch connector on the other end to connect to a light bar. They're compatible with Rigid Industries LED lights: Dually (single), D2 (single), 4 in. E-Series, 6 in. E-Series, 4 in. SR-Series, and 6 in. SR-Series light bars.
( 5 )
$59.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
