Availability
Get one of these Rhodes Race Cars Pro Series anti-roll bar/sway bar kits for your ride, and let the performance begin! They are available in 24 in. and 36 in. frame rail widths and feature 1 1/2 in. diameter, .188 in. wall 4130 chromoly shafts that pivot on PTFE bushings for smooth and controlled body roll. The 4130 weld-on arms in these RRC kits will not slip or become loose like bolt-on arms. They work on cars up to 1,500 hp and up to 4,000 lbs. RRC Pro Series anti-roll kits come complete with all mounting tabs, rod ends, and Grade 8 hardware.
( 8 )
$340.00
Control wheel stands and put more power into moving the car forward. Get Rhodes Race Cars Sportsman Series wheelie bars for your vehicle today. Features and benefits: * Made from 1 1/8 in. diameter, .058 wall, 4130 chromoly tubing for the ultimate in strength * Main tubes come with TIG-welded wheel brackets installed * Wheel brackets are made from 4130 chromoly with a second hole to raise the wheelie bar for additional ground clearance during loading and unloading * Designed to be 70 in. from center of the rear end housing to center of the wheelie bar wheel * Comes complete with mild steel rod ends, pull pins, aluminum wheels, and all hardware necessary (welding required) * Welded kits available with lower section completely welded * Welded kits have upper bars with one threaded bung welded in; the second bung must be welded in once height has been established
( 6 )
$349.95
Rhodes Race Cars Pro Mod Double X-Brace Series Wheelie kits are designed to handle the extreme shock loads produced by Pro Mod's. These kits provide excellent stability for high performance drag racers and come complete with chromoly steel wheel brackets, mild steel rod ends, pull pins, aluminum wheels, and necessary installation hardware. Kit features: * Complete kit is made from 1 1/4 in. .065 chromoly * 4130 Chromoly construction for the ultimate in strength * Main tubes come with TIG-welded wheel brackets installed * Wheel brackets have a second hole for raising the wheelie bar during loading and unloading of the car to give you additional ground clearance * Designed to be 96 in. from center of the rear end hosing to center of the wheelie bar wheel * Full Double X-Brace design can handle extreme shock loads * Welding required for kit installation * Powdercoating available for an additional charge
Not Yet Reviewed
$849.95
Control wheel stands and put more power into moving the car forward. Get Rhodes Race Cars Pro Series wheelie bars for your vehicle today. Features and benefits: * Upper tubes, lower main tubes, and lower cross bar are made from 1 1/4 in. diameter, .065 in. wall, 4130 chromoly tubing for the ultimate in strength * Lower diagonals (X-braces) are made from 1 1/8 in. diameter, .058 in. wall, chromoly tubing * Lower main tubes come with TIG-welded wheel brackets installed * Wheel brackets are made from 4130 chromoly with a second hole to raise the wheelie bar for additional ground clearance during loading and unloading * Designed to be 80 in. from center of the rear end housing to center of the wheelie bar wheel * Full X-brace design for the lower section * Comes complete with 4130 heavy-duty rod ends, push pull pins, steel wheels, and all hardware necessary (welding required) * Welded kits available with lower section completely welded * Welded kits have upper bars with one threaded bung welded in; the second bung must be welded in once height has been established
Not Yet Reviewed
$549.95
Rhodes Race Cars Funny Car cage conversion kits include all the tubing necessary to upgrade your existing roll cage. These conversion kits can be installed in virtually any existing roll cage or tube chassis vehicle. The tubing is purposely left long so that it can be cut to fit to your vehicle's particular chassis application. Funny Car cage conversion kits are available in the following materials: * 1 5/8 in. X .134 in. wall ERW mild steel * 1 5/8 in. X .120 in. wall DOM * 1 5/8 in. X .083 in. wall chromoly
( 6 )
$249.95
—
$324.95
Rhodes Race Cars competition roll cages meet or exceed NHRA and IHRA requirements (when properly installed). Available in 4, 6, 8, and 10-point models, all RRC bars are precision bent for each particular body style and feature notched tube ends (where applicable) for ease of installation. Increase chassis stiffness, and race safe with Rhodes Race Cars competition roll cages. RRC roll bars and cages are available in the following materials: * 1-3/4 in. x .134 in. wall mild steel tubing * 1-3/4 in. x .120 in. wall DOM tubing * 1-3/4 in. x .083 in. wall 4130 chromoly tubing The 4-point kits include main hoop, rear braces, seat crossmember, and four steel mounting plates. The 6-point kits include main hoop, rear braces, side bars, seat crossmember, and six steel mounting plates. The 8-point kits include main hoop, rear braces, side bars, frame supports, seat crossmember and 6 steel mounting plates. The 10-point kits include everything in the 8-point kits, plus a roof hoop, windshield runners, and dash crossmember. Note: Because of differing driver positions and main hoop locations, roof hoop and windshield down bars are not notched!
( 141 )
$584.95
Rhodes Race Cars SCCA, NASA, and Drift roll cages are made specifically for hobbyists and for serious racers looking to compete in SCCA, NASA, or Formula D events. All road race cages feature a main hoop diagonal and dual door bars (can be made into dual X-bars). They are weld-in cages and feature notched tube ends (where applicable) for ease of installation. Roll cages are offered in these materials: * 1 5/8 in. O.D. 0.134 in. wall ERW mild steel tubing * 1 5/8 in. O.D. 0.120 in. wall DOM tubing * 1 5/8 in. O.D. 0.083 in. wall 4130 chromoly tubing DOM tubing is very strongly recommended; ERW cages will most likely NOT pass tech inspection for most classes. Chromoly is not recommended by most sanctioning bodies. Due to different requirements for specific classes and weights, you should check with your track or sanctioning body for specific guidelines prior to purchase. It is the installer's responsibility to assure that a cage meets race organization rules as to tubing material and sizes, fit, placement of components, and welding. Note: Because of differing driver sizes and main hoop locations, roof hoop and windshield down bars are not notched. Some minor trimming may be required during installation.
( 2 )
$974.95
Rhodes Race Cars Lemons and Chumps roll cages are specifically designed for those of you looking to compete in 24 Hour of Lemons and ChumpCar Series races. RRC has taken out all of the guess work and come up with these easy-to-install kits. All the tubing is pre-bent and notched for ease of installation. Rhodes Race Cars Lemons and Chumps roll cages are available in ERW mild steel, DOM, and chromoly. ERW mild steel is accepted by both sanctioning bodies, but DOM is very strongly recommended. Chromoly is generally NOT recommended for this type of racing. Check your sanctioning body's rules before you order! Note: Some minor trimming may be required during installation. All RRC cages are weld-in cages.
( 4 )
$974.95
Rhodes Race Cars rear end housing narrowing fixture kits allow you to "slim down" your rear end to get some additional clearance. Available with 60 in. or 72 in. lineup bar, each kit includes pinion centering plate, housing end outer pucks, and outer diameter inner pucks. Choose the kit preferred for your application.
( 1 )
$674.95
—
$699.95
When it comes to high-horsepower applications, Rhodes Race Cars fabricated Ford 9 in. housings are the only way to go. Available in 48 in. and 60 in. lengths, all the kits feature face plates with 3/8 in. press-in studs, billet aluminum fill caps, and drain fittings. Mild steel housings have 3 in. axle tubes; chromoly housings use 3 1/2 in. axle tubes. They are available with many different options--get one for your ride today. Un-welded kits require a rear end housing fixture (sold separately) to ensure proper axle alignment. Welded kits are available from mild to wild for a wide range of horsepower applications and feature: * Housing ends of your choice * 4-link or ladder bar brackets * Mild steel or chromoly back braces
( 17 )
$439.95
—
$789.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
