Availability
When it comes to high-horsepower applications, Rhodes Race Cars fabricated Ford 9 in. housings are the only way to go. Available in 48 in. and 60 in. lengths, all the kits feature face plates with 3/8 in. press-in studs, billet aluminum fill caps, and drain fittings. Mild steel housings have 3 in. axle tubes; chromoly housings use 3 1/2 in. axle tubes. They are available with many different options--get one for your ride today. Un-welded kits require a rear end housing fixture (sold separately) to ensure proper axle alignment. Welded kits are available from mild to wild for a wide range of horsepower applications and feature: * Housing ends of your choice * 4-link or ladder bar brackets * Mild steel or chromoly back braces
( 17 )
$789.95
Rhodes Race Cars competition roll cages meet or exceed NHRA and IHRA requirements (when properly installed). Available in 4, 6, 8, and 10-point models, all RRC bars are precision bent for each particular body style and feature notched tube ends (where applicable) for ease of installation. Increase chassis stiffness, and race safe with Rhodes Race Cars competition roll cages. RRC roll bars and cages are available in the following materials: * 1-3/4 in. x .134 in. wall mild steel tubing * 1-3/4 in. x .120 in. wall DOM tubing * 1-3/4 in. x .083 in. wall 4130 chromoly tubing The 4-point kits include main hoop, rear braces, seat crossmember, and four steel mounting plates. The 6-point kits include main hoop, rear braces, side bars, seat crossmember, and six steel mounting plates. The 8-point kits include main hoop, rear braces, side bars, frame supports, seat crossmember and 6 steel mounting plates. The 10-point kits include everything in the 8-point kits, plus a roof hoop, windshield runners, and dash crossmember. Note: Because of differing driver positions and main hoop locations, roof hoop and windshield down bars are not notched!
( 140 )
$759.95
—
$874.95
Rhodes Race Cars fuel tanks are made from .100 thick, 5051 aircraft-grade aluminum alloy—ensuring the best quality material and craftsmanship go into every tank. They're designed with your safety in mind. Fully baffled and designed to relocate the fuel tank from the cab area to under the bed near the rear axle, they can increase your fuel capacity to 20 gallons. Rhodes Race Cars fuel tanks come with all necessary mounting hardware.
( 5 )
$799.95
—
$899.95
Rhodes Race Cars offers several direct-fit fuel cells. They are made from .100 thick, 5051 aircraft aluminum alloy to ensure the best quality material and craftsmanship. Designed with your safety in mind, most options are internally baffled, will include a factory-style, standard, or sumped pickup, and are available with or without a single or dual internal fuel pump. Select the Rhodes vehicle-specific fuel cell needed for your ride.
Not Yet Reviewed
$889.95
—
$999.95
Rhodes Race Cars SCCA, NASA, and Drift roll cages are made specifically for hobbyists and for serious racers looking to compete in SCCA, NASA, or Formula D events. All road race cages feature a main hoop diagonal and dual door bars (can be made into dual X-bars). They are weld-in cages and feature notched tube ends (where applicable) for ease of installation. Roll cages are offered in these materials: * 1 5/8 in. O.D. 0.134 in. wall ERW mild steel tubing * 1 5/8 in. O.D. 0.120 in. wall DOM tubing * 1 5/8 in. O.D. 0.083 in. wall 4130 chromoly tubing DOM tubing is very strongly recommended; ERW cages will most likely NOT pass tech inspection for most classes. Chromoly is not recommended by most sanctioning bodies. Due to different requirements for specific classes and weights, you should check with your track or sanctioning body for specific guidelines prior to purchase. It is the installer's responsibility to assure that a cage meets race organization rules as to tubing material and sizes, fit, placement of components, and welding. Note: Because of differing driver sizes and main hoop locations, roof hoop and windshield down bars are not notched. Some minor trimming may be required during installation.
( 2 )
$824.95
—
$999.95
Rhodes Race Cars Lemons and Chumps roll cages are specifically designed for those of you looking to compete in 24 Hour of Lemons and ChumpCar Series races. RRC has taken out all of the guess work and come up with these easy-to-install kits. All the tubing is pre-bent and notched for ease of installation. Rhodes Race Cars Lemons and Chumps roll cages are available in ERW mild steel, DOM, and chromoly. ERW mild steel is accepted by both sanctioning bodies, but DOM is very strongly recommended. Chromoly is generally NOT recommended for this type of racing. Check your sanctioning body's rules before you order! Note: Some minor trimming may be required during installation. All RRC cages are weld-in cages.
( 4 )
$824.95
—
$999.95
Rhodes Race Cars Pro Mod Double X-Brace Series Wheelie kits are designed to handle the extreme shock loads produced by Pro Mod's. These kits provide excellent stability for high performance drag racers and come complete with chromoly steel wheel brackets, mild steel rod ends, pull pins, aluminum wheels, and necessary installation hardware. Kit features: * Complete kit is made from 1 1/4 in. .065 chromoly * 4130 Chromoly construction for the ultimate in strength * Main tubes come with TIG-welded wheel brackets installed * Wheel brackets have a second hole for raising the wheelie bar during loading and unloading of the car to give you additional ground clearance * Designed to be 96 in. from center of the rear end hosing to center of the wheelie bar wheel * Full Double X-Brace design can handle extreme shock loads * Welding required for kit installation * Powdercoating available for an additional charge
Not Yet Reviewed
$849.95
Rhodes Race Cars rear frame packages are great for the drag racer looking for the lightest possible back half kit! Mild steel frames feature 1/4 in. thick chassis brackets, and each frame arrives at your door completely JIG-welded, with the chassis brackets and upper shock crossmember fully TIG-welded. Order the frame rail width and other options designed for your car.
Not Yet Reviewed
$849.95
Rhodes Race Cars Elite Series 4-link suspension kits are specifically designed to handle the extreme horsepower levels produced by today's Pro Stock/Pro Mod cars. Features and specs: * 1/4 in. 4130 chromoly Pro Series housing and chassis brackets * Housing brackets have integrated shock and wheelie bar mounts * Housing brackets are for 3 1/2 in. axle housing tubes * 1 1/2 in. O.D. .095 in. thick wall chromoly 4-link tubes * Four left and four right hand 3/4 in.-16 weld-in threaded bungs * Coilover shock mounting kit * 1/2 in. holes with 5/8 in. hole spacing for the ultimate in adjustability * NAS mounting hardware * Overall length is 18 in.
Not Yet Reviewed
$799.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
