Availability
RESTOPARTS® Manufactured has raised the bar when it comes to quality, value, and authenticity with all of their exterior accessories, including these accurately reproduced outside mirrors. Each assembly features a diecast housing with brilliant chrome finish, and most models come with a precision-tooled base and hardware to facilitate easy installation. The mirrors are available in a variety of shapes and styles for replacement on select 1950s, '60s, and '70s applications.
( 57 )
$84.99
—
$99.99
RESTOPARTS® Manufactured coolant overflow tanks are authentic and ready for duty as part of your coolant system. Molded in heavy-duty plastic, these tanks feature the correctly-located mounting tabs and hose connections for a hassle-free installation. Order the RESTOPARTS® Manufactured coolant overflow tank designed for your application.
( 9 )
$66.99
RESTOPARTS® Supplied front-end fastener sets make finding the required parts so much easier. These master kits include all of the necessary hardware—nuts, bolts, and washers—to assemble the complete front-end on your vehicle. Each bolt features the correct factory dimensions and coatings for an authentic appearance when installed. The sets are available for dozens of Chevrolet and Pontiac applications from the 1960s and '70s.
( 4 )
$64.99
—
$84.99
RESTOPARTS® Manufactured offers door sill plates for hundreds of vehicles from the 1950s, '60s, '70s, and '80s. These door jamb step plates are machined from aluminum with a clear anodized finish for protection. They're identical to the factory originals, including the engraved or riveted logo emblems. Sill plates take a lot of abuse, with driver and passengers getting in and out of the vehicle for decades. Now you can replace the highly visible components economically! Order for your application.
( 47 )
$92.99
—
$109.99
RESTOPARTS® Manufactured interior sunvisor brackets are designed to mount your sunvisor to the headliner. They're manufactured from quality materials using exacting tolerances for an OEM-quality fit. The brackets are available in a variety of styles and finishes for replacement on many vehicles from the 1960s, '70s, and '80s. Secure your sunvisor and eliminate glare with new attachment components from RESTOPARTS®.
( 18 )
$64.99
—
$93.98
Supe up your classic Super Sport with these professionally reproduced RESTOPARTS® Manufactured hood pin kits. They include the finest stainless steel and hand-polished components—all countersunk holes in the right places, authentic bolts, and original style cables. Install them on your vehicle today and boast some serious show-type eye appeal. Hood pin kits include: * 2 Polished stainless steel plates * 2 Rubber plate gaskets * 8 Plate mounting screws * 2 Threaded hood pins * 4 Hood pin washers * 4 Hood pin nuts * 2 Hood pin clips * 2 Hood pin cables * 2 Plastic cable retainers
( 23 )
$56.99
RESTOPARTS® Manufactured door hinges are available for a wide range of 1960s, '70s, and '80s era vehicles. These OEM-quality replacements are built to factory specs for proper fit and function. Decades of use can lead to faulty or sagging hinges—so that your car doors are misaligned and fail to close securely. New hinges will restore the performance you expect. Numerous models are available, with and without hardware. Order the hinges recommended for your application.
( 30 )
$59.99
—
$94.99
RESTOPARTS® Manufactured offers reproduction hood moldings for dozens of Chevrolet applications from the 1960s and '70s. Machined from aluminum or stainless steel, the trim pieces are available in different styles and finishes. They're designed to look and fit just like the factory hood moldings. Order the kit recommended for your vehicle.
( 4 )
$64.99
—
$103.99
Timeless craftsmanship is evident in RESTOPARTS® Manufactured roof drip molding kits. They are properly shaped via industry-standard stamping methods (not "bending," like competitors' versions, which can be inconsistent). Because they are properly stamped, there is no loss of brilliance or detail.
( 10 )
$92.99
—
$124.99
RESTOPARTS® Manufactured offers a selection of fan shrouds to fit your "cool" classic. Designed for OE-sized radiators, these precision shrouds are available in plastic-molded, injection-molded, and steel versions. Most are not pre-drilled and do not include mounting hardware. The replacement shrouds are available in a variety of sizes to ensure a factory fit, appearance, and lasting performance. Order the model recommended for your application.
( 155 )
$74.99
—
$142.99
RESTOPARTS® Manufactured offers heater and air conditioning box seals for hundreds of vehicles from the 1960s, '70s, and '80s. These replacement seals are complete die-cut sets to ensure proper fit and performance. They're available for applications with or without A/C. Order the box seals recommended for your ride.
( 10 )
$52.99
Keep things real on your restoration with legit-looking dome lights from RESTOPARTS® Manufactured. These precise reproductions come complete with the base, wire, and leads. The bases are made of chrome plated plastic and are identical to the originals in fit and appearance, while the lenses are white or opaque with correct patterns and ribbing. Light up your interior with authentic dome lighting from RESTOPARTS® Manufactured.
( 47 )
$52.99
—
$56.99
You've run out of gas ... again. The gauge shows that you still have gas. What gives? Maybe it's time for a new fuel tank sending unit from RESTOPARTS® Manufactured. The sending units are exact reproductions guaranteed to perform flawlessly. Assembled from stainless steel for rust resistance, these replacements include an O-ring for sealing, as well as a 1/4 in. return line on select models. If running on empty is not your idea of excitement, install a new fuel sending unit from RESTOPARTS® Manufactured for accurate gas levels. They're available for a wide range of vehicles.
( 99 )
$72.99
—
$94.99
RESTOPARTS® Manufactured offers special hard rubber trim to finish your headliner installation. These reproductions are made to OEM dimensions with the right contours and mounting holes (where applicable) to ensure a hassle-free fit with authentic appeal. The trim is available for nearly a hundred classic vehicle application from the 1960s and '70s.
( 1 )
$104.99
RESTOPARTS® Supplied bucket seat extension brackets move your seat back 2 in. to add extra leg room. Based on an original factory option, these steel brackets are approximately 3/16 in. thick for superior strength and rigidity. Installation is made easy with properly located and pre-drilled mounting holes, as well as studs for seat tracks. The authentic GM "sliding style" reproductions are designed for dozens of 1960s and '70s era Chevrolet, Buick, Pontiac, and Oldsmobile applications.
( 2 )
$95.99
Why compromise quality? When it comes to rear view mirrors, you don't have to! RESTOPARTS® Manufactured inside rear view mirrors are high-end reproductions and are manufactured in precision-stamping dies, just like the factory originals. Their stainless steel backing finely replicates the original mirror-like finish to a tee! These precision crafted reproduction mirrors are professionally assembled, ensuring that your mirror will be trouble-free and a breeze to install.
( 4 )
$92.99
—
$112.99
Your car's bushings are dried-out and in need of replacing, but keeping your favorite ride in top form can drain your wallet. No worries, now you can maintain your investment and get the best value for your money with RESTOPARTS® Manufactured body bushing kits. These kits are still produced in custom case-hardened steel tools—expensive, but the right way to do it—ensuring a precise, injection-molded rubber bushing every single time. Plus, each steel insert is stamped the right way—in authentic zinc. The bushing kits are available with or without hardware for many applications from the 1950s thru the 1980s. Get time-tested and proven quality for your dollars with quality parts by RESTOPARTS®.
( 52 )
$109.99
RESTOPARTS® Manufactured taillight lenses are premium injection-molded replacements for specific vehicles. The lenses are made with better-than-original polycarbonate plastic for longevity. They're offered in a wide variety of configurations to restore the look and functionality of your tail lamps and backup lights. Complete your back-end with RESTOPARTS® quality reproduction lenses, available for many classic 1960s and '70s applications.
( 9 )
$59.99
—
$102.99
RESTOPARTS® Manufactured offers body molding strips for a wide range of vehicles from the 1960s, '70s, and '80s. This OEM exterior replacement trim is made to exacting specifications for a perfect fit and appearance. The strips are available in countless styles, as well as material and finish options. From front-end to rear-end and every point in-between, you'll find the body molding designed for your restoration—and installation is easy with clips, adhesive, or bolt-on.
( 11 )
$59.99
—
$109.99
RESTOPARTS® Manufactured glove box doors are authentically reproduced to fix your repair or restoration! They include hinge hardware and feature the original grain surface.
( 2 )
$72.99
RESTOPARTS® Supplied bumper pads are neoprene compressed rubber pads feature the "SS" logo and are completely authentic in every detail. They are easy to install and look unbelievably identical in fit, color, and texture--just like the factory originals.
( 3 )
$91.99
RESTOPARTS® Manufactured instrument cluster lenses offer a crystal-clear, factory-fresh look. Correctly reproduced, these injection-molded plastic gauge lenses replace your existing clouded or cracked dash panel lens. The cluster lenses are available for dozens of 1970s era Chevrolet Super Sport applications.
( 5 )
$92.99
RESTOPARTS® Manufactured parking light assemblies are custom-designed for your classic ride. They're a direct fit, hook up easily, and look and work just like the originals. These replacements are available for the driver or passenger side, and the assemblies include an amber or clear lens, depending on your application. RESTOPARTS® Manufactured parking light assemblies ensure a perfect fit for a no-hassle install and performance.
( 2 )
$56.99
—
$102.99
RESTOPARTS® Supplied steering shafts are made from polished stainless steel and allow you to customize your car with aftermarket columns and steering boxes. The shafts are available in several lengths so you can select exactly what you need for your project.
( 1 )
$65.99
—
$103.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
