Availability
OTC Strut Tamer II Extreme spring compressors supply the strongest compression force—up to 4,000 lbs. to compress and rebuild large truck, SUV, and passenger car shock/strut assemblies. They also set a standard for safety, meeting the new ASME PASE safety standards for spring compressors. Safely compress the largest strut springs with OTC Strut Tamer II Extreme. They are available with or without stand. Features include: * Forged locking jaws includes larger pads and offset to clamp onto and compress springs even tighter than before * Extra-thick 5/8 in. compression arms for superior strength, stability, and safety * Locking trunions for optimal stability during spring compression * Arm-locking rings eliminate the need for tools to adjust * 2:1 reduction gearbox allows for a 2:1 torque compression increase when compressing struts * Spring capacity of 2 1/2 in. to 10 in. diameter; 1 1/4 in. to 24 in. vertical stroke * Stand with wheels for easy mobility in the shop (ST model only) * During compression, the stand's wheels lift off the floor, and four no-slip rubber pads keep the stand firmly in place
( 1 )
$1,539.99
—
$1,898.99
OTC Hub Grappler kits are the complete solution for servicing wheel hubs and bearings on the vehicle without removing the steering components or knuckle. They eliminate unnecessary alignments or the use of a shop press, cutting service time dramatically. OTC Hub Grappler kits include six adapters that increases application coverage, a tie rod/ball joint tool, and two Ford axle installers. Features include: * Hub Grappler puller is specifically designed to apply maximum force with minimal effort from an impact gun * The jaws are designed and sized to properly fit hub applications and can be quickly located on the puller bar without the use of fasteners * A 3/4 in. custom drive screw coupled with a special equalizer washer provides smooth operation while the proprietary heat-treating extends its life 5 to 10 times longer than similar designs
( 3 )
$1,954.99
OTC's 25-ton capacity ram with half coupler are commonly used in shop presses, for tasks like pressing rear axle bearings and piston pins, as well as for bending, straightening, and other maintenance operations. The hydraulic cylinder is used to apply force in various applications, particularly in situations requiring pushing, pulling, or lifting heavy loads. Product Overview: * Designed for applications where space is limited, and offers increased efficiency to handle tasks that would be difficult or impossible manually * Hydraulic operation—uses hydraulic pressure for powerful and controlled force application * Commonly used in shop presses to apply force for pressing, bending, and straightening, handles a wide range of heavy-duty applications like pressing rear axle bearings, straightening frames, or correcting rear housings and axles * Also useful in various maintenance and repair tasks where controlled force is needed * 25-Ton capacity—indicates the maximum force the ram can exert * Half coupler allows for connection to other hydraulic components or attachments * Threaded ram collar and base facilitates easy mounting connection to other equipment
Not Yet Reviewed
$1,734.99
Available in 5 to 100 ton capacities, these OTC hydraulic rams can handle a wide range of load conditions. OTC's design ensures positive, leak resistant sealing throughout all pressure ranges, while maintaining full piston return characteristics. OTC also manufactures these rams with additional bearing surface to effectively resist the stress by off center loads.
Not Yet Reviewed
$1,694.99
—
$1,722.99
Rugged and stable OTC 2,000 lb. capacity low-lift transmission jacks will handle your heavy transmission workload. They include an adapter plate for Eaton Fuller Road Ranger transmissions, and their low-profile design gets under the lowest clearance trucks, making them ideal for clutch repair work. The pump handle rotates 360 degrees for operator convenience, and a safety overload prevents use beyond their rated capacity. OTC 2,000 lb. capacity low-lift transmission jacks feature a height range of 6 7/8 in. to 35 1/4 in.
Not Yet Reviewed
$1,990.99
OTC engine load levelers are designed to hook to a crane or hoist to handle and position large pieces. OTC engine load levelers can be adjusted to compensate for off-center loads or be adjusted horizontally.
( 27 )
$1,958.99
OTC service floor jacks have built-in safety overload to prevent over utilization beyond the jack's rated capacity. They also feature a convenient foot pedal to speed the lifting operation, with a handle lock and release control located on top of the handle. The spring-loaded handle can be locked into any position from vertical to horizontal. Cycle tested design for a long life of professional duty. Offered in 5, 10, or 20-ton with or without air-assist OTC service floor jacks out muscle all others.
Not Yet Reviewed
$1,564.99
—
$2,020.99
OTC 13-ton capacity puller sets are true all-makes/models puller sets with 13 tons of force. They feature 11 pullers, three bearing splitters, and nearly a dozen threaded adapters to help you easily pull gears, bearings, shafts, pinions, outer races, and more. Whether you are pulling something off a shaft, pulling something out of a hole, or pulling a shaft out of something, OTC 13-ton capacity puller sets have everything you need to separate rusted, frozen, or seized components. OTC kits include: * Push-puller with 6 3/4 in. legs to remove and install press-fit parts * 15 3/4 in. legs for pusher-puller * Grip-O-Matic 2-ton 2-jaw puller * Grip-O-Matic 5-ton 2-jaw puller * Grip-O-Matic 7-ton 2-jaw puller * Grip-O-Matic 13-ton 2-jaw puller * Gear and pulley puller * Flange-type puller * Steering wheel puller * Pilot bearing puller * Slide hammer puller * Pitman arm puller * Step plate adapter set * Internal threaded adapters: 1/2 in.-20 x 5/8 in.-18 * Internal threaded adapter set * Bearing cup pulling attachment * Bearing splitter with maximum spread of 15/16 in. * Bearing splitter with maximum spread of 2 in. * Bearing splitter with maximum spread of 4 5/8 in. * Bearing splitters are to be used with pusher-puller or Grip-O-Matic pullers
Not Yet Reviewed
$1,509.99
These OTC strong box puller sets are the most versatile pullers that your garage or shop will ever need. These OTC pullers enable you to pull gears, bearings, pulleys, wheels, and more on cars and light trucks. In these sets, you get eight pullers, five attachments, and extra puller jaws. All of these tools are contained in a rugged, lockable metal storage cabinet.
Not Yet Reviewed
$1,512.99
OTC truck dual wheel dollies remove, transport, and replace dual wheel and tire assemblies without strain or struggle. Features: * 1,500 lb. capacity * Swivel casters, 3 1/2 in. front and 3 in. rear, provide easy maneuverability * Floor space is 43 in. by 42 in. * Hydraulic jack provides over 6 1/2 in. of lift and tilts wheel assembly 7 degrees to prevent damage to wheel seal * 6 ft. support chain to hold load in place
Not Yet Reviewed
$2,003.99
OTC's 30-ton hollow center rams are ideal for jobs that require a great deal of force and a relatively short stroke. Compared to the force the ram develops, they are lightweight, compact, and easy to handle, permitting use in confined quarters. Center-hole feature allows extending jacking screws, cables, puller screws, and more to be inserted through the ram. Product features: * The ram is designed to exert a significant amount of force (30-tons) over a relatively short distance * Despite its power, the ram is designed to be relatively compact and lightweight, making it easier to handle and position, especially in tight work areas * The hollow core allows for the insertion of rods, screws, cables, or puller screws, enabling unique pulling and tensioning setups for versatility of application * Chrome-plated piston rods resist wear, and superior packing and seals provide high cycle life without leakage * Piston head inserts are interchangeable for versatility * Tapped base mounting holes provide easy installation in fixed applications * Rams withstand full "dead-end" loads
Not Yet Reviewed
$1,844.99
OTC Revolver engine stand adapter plates are available for a long list of engines from Detroit Diesel to Volvo. Many of these steel plates will require the universal adapter assembly for mounting individual plates to your OTC Revolver engine stand. Choose the plate(s) for the engine(s) your work on.
( 2 )
$1,951.99
OTC's 17.5-ton hollow center rams serve as a specialized and powerful hydraulic tool that can generate significant force for tasks like pressing bearings, removing stubborn components, or straightening bent chassis parts, making them suitable for confined spaces for maintenance and repair work. The hollow center is particularly advantageous when dealing with components that require a jacking screw or puller rod to pass through the center for extraction or installation. This characteristic makes them ideal for working in tight or confined areas often encountered in automotive repair, such as engine bays or undercarriage components. Product Overview: * OTC rams are engineered for strength and durability, meeting industry standards like ASME B30.1 * The rams can exert a significant amount of force (17.5 tons in this case) with a relatively small and lightweight design * Common use for applications in automotive repair include bearing and bushing removal/installation, straightening frame of body components, pressing operations (can be used in conjunction with shop presses), and general pushing and spreading apart components * The hollow center aligns objects during assembly or disassembly, allowing technicians to insert jacking screws, cables, puller screws, and other accessories directly through the ram—this is particularly useful for applications like pulling bearings, gears, or other components where a central pull is needed
Not Yet Reviewed
$1,554.99
OTC high performance hydraulic rams are made for strength, safety, and performance. These OTC hydraulic rams feature threaded ram collars and internal base threads to simplify mounting, as well as threaded piston rod ends. These hydraulic rams are a great replacement for worn-out leaky rams on body and frame equipment.
( 2 )
$2,076.99
OTC push-pull sets are manufactured out of quality materials and are built to handle a wide range of pulling jobs. These OTC push-pull sets can be used with OTC internal pulling attachments and are available in multiple weight capacities.
( 1 )
$1,507.99
—
$1,619.99
OTC rear suspension bushing tool master kits will cut service time dramatically. With a 15-ton capacity cylinder and OTC's air hydraulic pump, these master kits will remove and install single-wrapped FAS II Airliner Freightliner rear suspension bushings in a fraction of the time of traditional methods.
Not Yet Reviewed
$1,728.99
OTC air/hydraulic pumps make ideal all-around power sources. They develop 10,000 psi at 100 psi air and feature a durable plastic reservoir, 2-stage release mechanism, internal relief valve, and a 3/8 in. NPTF oil port.
Not Yet Reviewed
$1,797.99
OTC Tools offers a variety of accessories for their 55-Ton Capacity Press. Sold individually or in sets, the components attach to the ram's forcing screw or support work on press bed. Available accessories include: * Bearing pulling attachment * Ram pushing adapter with 1 in. diameter shank * Ram pushing adapter with 1 1/4 in. diameter shank * V-pushing adapter * 14 in. long V-blocks (pair) * Ram forcing cap * Threaded adapter (for single acting only) Order the parts needed for your applications.
Not Yet Reviewed
$1,872.99
There are always trade-offs when working on vehicles. Sometimes doing things on the cheap ends up costing more than getting what you need to do it right the first time. OTC car ball joint master service kits will save you the hassle of trying to find the right tool for the job. These 50+ piece adapter kits for press-in-ball joints and universal joints fit the majority of car applications. These large kits come in two cases and include a comprehensive manual including diagrams with instructions. Experts will agree that ball joints are among the most important parts for safely driving a vehicle. Make certain to change them out correctly with OTC car ball joint master service kits.
Not Yet Reviewed
$1,521.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
