Availability
OTB Gear makes tough and attractive retro hot-rod parts and accessories geared toward old-school rodders. Summit Racing carries an array of OTB Gear parts, including...
OTB Gear makes tough and attractive retro hot-rod parts and accessories geared toward old-school rodders. Summit Racing carries an array of OTB Gear parts, including hot rod lighting assemblies and headlight housings, dash panels, air cleaners, ignition coil covers, radiator caps, velocity stacks, fuel distribution blocks, clutch master cylinders, and much, much more. If you’re looking for top-quality polished chrome hot rod parts with that killer retro design, then OTB Gear from Summit Racing will satisfy your needs! Order yours today!
OTB Gear makes tough and attractive retro hot-rod parts and accessories geared toward old-school rodders. Summit Racing carries an array of OTB Gear parts, including hot rod lighting assemblies and headlight housings, dash panels, air cleaners, ignition coil covers, radiator caps, velocity stacks, fuel distribution blocks, clutch master cylinders, and much, much more. If you’re looking for top-quality polished chrome hot rod parts with that killer retro design, then OTB Gear from Summit Racing will satisfy your needs! Order yours today!
For the well-dressed engine--OTB Gear valve cover breathers are crafted from aircraft-grade A356 aluminum. OTB's selection presents show-quality style for under your hood. Their classic fin designs will top your choice of twist-on or push-in breathers, offering "old school" looks that are clean and appealing. Add some nice little embellishments to your valve covers with OTB Gear breathers.
( 21 )
$59.00
—
$145.00
OTB Gear ignition coil covers have taken a page from the classic "old school fins" book. Not only are they great looking, they have some worthwhile features—such as a standoff rib that allows you to easily clean the backside and the surface behind it. No inaccessible areas to drive you crazy. The covers are mounted with 1/4 in.-20 drive studs (removable) that can't be mistakenly driven into the side wall of the coil. Cast in aircraft-grade A356 aluminum, they're available with a natural finish or polished to a very high sheen. Some models feature chromed coils.
( 2 )
$129.00
—
$199.00
OTB Gear Bug Domes keep the big stuff out of your velocity stacks and 2-barrel carburetors. Originally created for 2-barrel carbs, Bug Domes have found many other applications. Totally fabricated out of stainless steel, these screens fit within the throat of a variety of velocity stacks or trusty old Stromberg, Holley, or Ford brand carbs to keep bugs, stones, and loose screws from getting into your engine. But, not only that--they also look really cool! And, since they fit within the inner diameter of 2-barrel carburetor throats, you can use them with popular slip-over accessories such as velocity stacks and the like. Built the right way ... and at the right price ... OTB Gear Bug Domes deliver quality, style, and function.
( 5 )
$18.00
—
$22.00
OTB Gear rear-end covers are the perfect cure for the boring pumpkin. Sturdy and popular rear-ends need a little work to look stylish. These new differential covers are cast in A356 aircraft-grade aluminum alloy—and are available in a natural or highly polished finish. No hardware is needed to attach; a generous supply of high temperature adhesive (600 degree) is furnished, allowing you to powdercoat after assembly, if desired. If the two surfaces being joined are clean, they are joined forever! Find the model designed for fitment on your axle.
( 3 )
$349.00
—
$419.00
OTB gear oil filler tubes with classic fin-style breather caps offer a finished look for your engine. These chromed steel filler tubes fit the 1 1/4 in. hole in various vintage-style manifolds and engines. The caps are crafted in aircraft-grade A356 aluminum. Dress up your engine compartment in classic style.
( 7 )
$69.00
—
$79.00
OTB Gear shift knob adapters allow you to convert a normal aftermarket shift knob from 16mm to other common metric or U.S. thread sizes. The inserts are made from brass to eliminate seizure, which often occurs with aluminum. These adapters are available individually or in multi-piece sets for specific applications, and jam nuts are included for each adapter.
( 13 )
$18.00
Gas caps seal the filler neck to your vehicle's tank; they are necessary and usually very ordinary. OTB Gear offers a line of gas caps that serve the purpose and make a statement. Using high-quality aluminum alloy to create bold designs, OTB's selection of fuel caps will be show-stopping additions to your vehicle. Available for 1932-48 Ford and 1928-65 Chevrolet, OTB Gear gas caps are shipped in two parts allowing you to align the cap designs properly. OTB recommends the use of metal-to-metal adhesive (not included) for the task. Select the favorite style for your classic ride. Styles and notes: * Finned gas caps -- U.S. made casting is of show quality A356 aluminum alloy * Pit Stop gas caps -- Machined from high quality aluminum alloy with a stainless steel cross bar * Octagon gas caps -- Machined from high quality aluminum alloy with stainless steel rivet-style screws * El Mirage gas caps -- Machined from high quality aluminum alloy with stainless steel rivet-style screws -- El Mirage Dry Lake has been associated with California hot rod racing for at least 80 years
Not Yet Reviewed
$89.00
Retro-look accessories enhance the interior of any classic vehicle--and no one does "old school" quite like OTB Gear. Their line of cast aluminum gauge panels harkens back to the early days of hot rodding, with a variety of shapes, sizes, and decorative vintage styles. Some models actually reflect the engine head designs of a bygone era. OTB Gear gauge panels are available for mounting in or under your dashboard, and you can choose to frame anywhere from one to six gauges. Finishes include natural and polished--but most can also be custom-painted.
( 10 )
$39.00
—
$239.00
OTB Gear radiator caps replace your mundane original with something far more ornate. These vintage look underhood accessories are furnished to you as a 2-part assembly, allowing exact alignment. The top shell is cast and machined from A-356 aircraft-grade aluminum, then polished to a show-quality lustre. Internally, the cap is a top-shelf Stant Corp. product. OTB universal radiator caps are available in several vintage and deco styles, with pressure ratings of 7 or 16 psi.
( 3 )
$72.00
—
$79.00
OTB Gear air filter elements are a cut above the rest. Their media are a medium gray, washable oiled cloth—and to hold it together, OTB used stainless steel mesh to add some shine, instead of the normal black painted steel mesh. The rubber ends are molded very cleanly for a nice fit and years of service. These filter elements are available in various shapes and sizes; order the model that works best with your application.
( 1 )
$32.00
—
$69.00
No more plastic. OTB Gear master cylinder remote reservoirs dress your ride with classic lines and premium aluminum materials. Expertly machined and cast, OTB reservoirs are offered in single, double, and triple styles with either a soft satin or stunning polished finish. Tasteful, clean, and very cool, OTB Gear master cylinder remote reservoirs beat plastic hands-down.
( 5 )
$149.00
—
$359.00
OTB Gear air cleaners will make the "oohs and aahs" flow! Whether you have a 2-barrel, 4-barrel, or fuel induction, these absolutely stunning retro toppers provide best-of-show style and modern performance. From OTB's finned and mohawked, to their domed, smooth, and teardrop designs, they are crafted from glorious aircraft-grade aluminum and polished (unpolished is available, too) to brilliance. Many of the air cleaners are fitted with their extremely effective Platinum Series filters that even sparkle in the sunlight! Vintage, old-school--no matter what you call them, it's all about the look, and from any angle, any one of the wide selection of OTB Gear air cleaners will be undeniably cool under your hood!
( 8 )
$165.00
—
$369.00
You don't have to settle for a plastic or billet reservoir, thanks to OTB Gear's master cylinder reservoir covers. They are a real focal point jewel with their double chamber reservoir, which is precision-cast in aircraft-grade A-356 aluminum and polished to show-grade standards. They feature a retro-style design and will allow you to run fluid lines from the bottom or backside, thus expanding your mounting possibilities. They are also available in a nice conversion top for early Corvette-style master cylinders (the ones secured by two wire bails on top). This conversion top is available in a choice of either polished or unpolished finishes.
Not Yet Reviewed
$145.00
—
$165.00
OTB Gear velocity stacks look cool and boost power. Compatible with 2-barrel carburetors, these impressive aftermarket units are available in several heights—and include the Bug Dome mesh screen to keep the debris out. The aluminum stacks are polished to a brilliant shine, an attractive accessory at car shows or any other time you lift the hood.
Not Yet Reviewed
$135.00
—
$169.00
OTB Gear radiator overflows make a statement! They offer a choice of unique tubes with custom caps that are anything but boring and predictable. First, their ribbed tube, topped with a sprocket-style cap, is available polished or unpolished. Second, their polished, smooth tube comes with a choice of sprocket, aero, or ribbed-style caps. All are cast in beautiful, top-quality aluminum and are finished to show-quality perfection. Coolant recovery becomes a visual art form under your hood with OTB Gear radiator overflows.
( 1 )
$169.00
—
$349.00
OTB Gear Bug Horns are a practical detail to top off your carburetor. These unusual velocity stacks are carefully constructed of premium aluminum alloy and secured with the stainless steel screws which are included. They allow plenty of airflow, while protecting your engine from debris with the stainless mesh Bug Dome. The units are available in a polished or an unpolished satin finish. Order the model designed for fitment with your particular carburetor—then enjoy the unique new look and power boost offered by OTB Gear Bug Horns!
Not Yet Reviewed
$109.00
—
$169.00
OTB Gear fuel distribution blocks are a throwback to hot rod designs from a more stylish era. These retro-look plumbing necessities have been refined for better mechanical performance, and are ideal for running multiple carburetors or adding a fuel gauge. The cast aluminum units are available in various shapes, drilled and tapped with two, three, or four standard gas line fitting outlets. Choose between a natural or polished finish. OTB Gear fuel blocks include mounting tabs for installation on any flat surface.
( 2 )
$65.00
—
$119.00
Replace your ugly mechanical fuel pump with OTB Gear crankcase breathers. Installed on your flathead engine intake, these one-way check valves allow high pressure to escape your engine crankcase, while preventing grit from being sucked in. Constructed from aircraft-grade aluminum with the baffles built into the tube, they are precision-machined to exacting standards. They include a gasket, but not the bolts. Their low profile prevents clearance issues. They're available in your choice of show-quality polish or unpolished.
( 2 )
$165.00
—
$175.00
OTB Gear valve covers will add a retro look to your vintage rod! These valve covers are cast in a premium A-356 alloy, using modern CNC precision tooling to assure a quality product. The casting is heat-treated to correct any warpage that can occur on a lengthy component during the cooling process. The gasket surface is then CNC-machined to assure an absolutely flat surface to eliminate oil leaks. Each valve cover includes a 1/2 in. thick aluminum spacer, gaskets, and hardware. OTB Gear offers their valve covers in tall or short versions, different finishes, and mounting location options. Additional details of OTB Gear valve covers include: * Finned design on valve covers allow for easy cleaning * Fin tops, as well as the valleys between have the same radius * All visible areas of the valve cover are polished and easy to keep that way * Also raised areas for the breather and hardware are ramped to make cleaning that much easier * Each valve cover comes with rubber grommets for mounting bolts (also a rubber grommet for the use of breather with 1 in. shaft) * Valve covers are slightly wider to cover the (four) perimeter mounting holes on the 235 head * Available in polished or shot blasted finishes * To mount 216 style valve cover on a 235 or 261, a stud kit is required to change mounting hardware location (sold separately)
( 1 )
$449.00
—
$599.00
Make a classic even better than it ever was with hot rod headlights installed using OTB Gear headlight conduit kits. Their fittings are chrome plated solid brass for a long, shiny life, and the PTFE-lined tubing makes it easy to slide wires through them and allows for bending without kinking. They can be cut to the desired length and screwed back together for a perfect fit. The generous 6 in. leads on each end make your connections easier. And, they're made with four wires, enabling you to power parking lights and turn signals if needed.
Not Yet Reviewed
$99.00
OTB Gear remote canister oil filters are indeed a striking and compact update on an old concept. They can be plumbed through the bottom or backside surfaces, which will reduce your oil line clutter. These units use a commonly available spin-on type oil filter (provided) and 3/8 in. NPT fittings (not included). Each filter is drilled and tapped for 3/8 in. mounting hardware and comes with two plugs to cap off the unused fitting holes. These show-quality remote canister oil filters are available in different styles, as well as your choice of a polished or satin (machined) finish.
Not Yet Reviewed
$289.00
—
$319.00
OTB Gear firewall wire ports are an attractive way to conceal wire routing holes in your firewall. Their classic finned cover design hide a bushing and back plate that will handle up to a 3/4 in. bundle of wires. They are available in polished or natural finishes and a grommet is provided to protect your wiring.
( 1 )
$99.00
—
$109.00
OTB Gear transmission shift knobs are engineered to be comfortable to the hand in true vintage style. They will add the finishing detail to your classic vehicle. All OTB knobs are handcrafted from a wide variety of durable materials and feature a show-grade finish to add that perfect look to your interior. From vintage-style fins, classic beehives, striking bulls-eyes, and artisan knobs, you're sure to find the fresh retro design so important to achieving the "old school" look. OTB Gear shift knobs are drilled and tapped for 16mm threads. SAE and metric brass (to eliminate seizure) thread adaptors are sold separately to fit common shifter threads.
Not Yet Reviewed
$79.00
—
$99.00
Add some retro appeal under your hood with an OTB Gear '40 Style engine dipstick! These polished aluminum accessories look fantastic, while performing their important function: offering accurate oil level readings. The vintage beehive design is based on the 1940 Ford shift knob—but sprocket and acorn style handles are also available. Most dipsticks include a chrome or flexible braided housing tube which bolts to the block from the inside of the headers. They're offered in several lengths for compatibility with various car makes and engine blocks spanning a half-century.
( 1 )
$55.00
—
$149.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
