Availability
Mr. Gasket electric transfer pumps eliminate the need for hand cranks. They're electrically powered, so just plug one into any 120 V outlet—or you can use the bonus harness with clips for connection to a 12 V battery. The suction pipe telescopes from 33.5 in. to 49 in., allowing one pump to be used on metal or plastic drums from 15 to 55 gallons. These transfer pumps are compatible with ethanol, methanol, DEF, washer fluid, detergent, water based media, agricultural chemicals, and light oils. These electric transfer pumps are not just for getting alcohol fuels into a race car; they can be used at the shop, on the farm, or in the yard. The included discharge hose is 6 1/2 ft. long and has a full control nozzle with easy on/off. Instructions are also included with the electric transfer pump.
( 7 )
$299.95
Mr. Gasket rear main seal installation tools are special alignment tools that center the front or rear cover when it is installed, allowing an easier way to install the seal (by lightly tapping on the tool with a rubber mallet). The timing cover and rear cover on GM LS series engines don't have dowel pins to ensure correct alignment to the center line of the crankshaft--often leading to annoying leaks at the front damper seal and rear main seal. Mr. Gasket durable plastic rear main seal installation tools are your resolve to a leak-free installation.
( 15 )
$75.65
After putting time and money into your engine, make sure you protect it with a Mr. Gasket engine bag. These heavy duty bags are designed to last and protect your engine from dust, debris and moisture that can get into places you don't want causing damage to your pride and joy. Mr. Gasket engine bags are big enough for most engines and even fit over most engine stands and dyno carts.
( 13 )
$12.57
Mr. Gasket rocker arm oil deflector clips keep hot engine oil off of you and your exhaust system by deflecting it down into your rocker arm assembly. This allows you to adjust your valves while your engine is running. They're designed to fit hollow feed-through type pushrods.
( 35 )
$22.64
Mr. Gasket top dead center indicator whistles can be used to locate approximate top dead center for all sorts of uses--distributor installation, timing chain inspection and replacement, or individual cylinder valve adjustment. Quick and easy to use, they whistle on the compression stroke and stop whistling at approximately top dead center. Just another one of those "Gotta Have It" tools from Mr. Gasket.
( 25 )
$34.51
On Sale
Mr. Gasket battery operated fuel transfer pumps are sure to quickly become the most popular tool in your shop or garage. With adaptability to most fuel jugs and cans, plus the compatibility with several type fluids, you will love using it for cars, boats, dirt-bikes, ATVs, Side x Sides, lawn mowers, and tractors. Simple, safe, and easy-to-use, these handy Mr. Gasket battery operated fuel transfer pumps make all your fill-ups fun! Product highlights: * Includes adapters to allow fitment to most fuel and gas cans * Flexible intake hose allows operation in 5 gallon jugs and smaller * Compatible with gasoline, diesel, and kerosene * 3 gallons per minute flow rate * Operating temperatures of 25 degrees to 110 degrees * 4.25 ft. flexible discharge hose * Auto stop feature shuts pump off when tank is full * Uses four AA batteries (not included) Safety Note: This product is not intended for use for drinking water.
( 18 )
$99.95
$74.96
Mr. Gasket LS timing cover alignment tools allow a safe, easy way to install the seal—by lightly tapping on the tool with soft rubber mallet. These specialized tools are designed to center the front or rear timing cover when it's installed to provide the correct alignment to the centerline of the crankshaft, and to help avoid seal leaks at the front or rear damper cover when installed. Mr. Gasket LS timing cover alignment tools are made of quality material, and are available in styles for use with or without a front seal in the timing cover.
( 16 )
$56.69
—
$62.95
Everyone from serious engine builders to backyard mechanics knows that for proper lubrication and long life, it's necessary to clean all of the holes and passages found in today's engines. These engine brush kits from Mr. Gasket feature stiff nylon bristles that won't soften or melt when used with cleaning solvents. To minimize bending, each handle is made from heavy-gauge twisted steel wire and has a loop on the end for easy hanging and storage.
( 18 )
$34.72
—
$74.19
On Sale
Mr. Gasket 7-piece AN wrench sets are designed to make it easy to assemble hose ends and maintain your race car or high performance vehicle. The contoured edge is comfortable in your hand and the short length helps to prevent over-tightening the hose ends. All wrenches are stamped and color-coded anodized for easy identification of the desired size, and they are made from 6061 T-6 billet aluminum.
( 4 )
$138.95
$76.95
Mr. Gasket non-marring scrapers work great for removing stubborn gasket residue using non-marring plastic blades. They feature a carbon steel body with a comfortable plastic and rubber grip handle. The razor blades also work well for removing labels and decals from glass. The gasket scrapers accept standard single-edge razor blades. They include 10 non-marring double-edge plastic blades and 10 single-edge razor blades.
( 7 )
$23.58
Serious engine builders and backyard mechanics alike need these special length brushes from Mr. Gasket to properly clean all of the holes and passages found in most automotive engines. Available in a wide variety of diameters and lengths, each brush is made from pure stiff-bristle nylon that won't soften or melt when used in conjunction with most engine-cleaning solvents. To minimize bending, each handle is made from heavy-gauge twisted steel wire, which also firmly holds the bristles in a spiral twist. A convenient loop on the end of each brush makes for easy hanging and storage.
( 8 )
$52.75
Pro degree wheels from Mr. Gasket have color-coded scales for instant readouts. Their universal design uses the harmonic balancer bolt to mount on the engine, and is designed to also work well on engines equipped with a roots-style supercharger.
( 1 )
$75.65
Mr. Gasket engine lift plates are designed for use with 2-barrel and 4-barrel manifolds. These steel plates feature bolt-on construction and a durable gold iridited finish.
( 31 )
$26.37
—
$37.80
Mr. Gasket's universal degree wheels are designed to ensure maximum accuracy during camshaft installations. They're made from anodized aluminum and feature easy-to-read instructions etched into the face. They include two adapters for a universal fit on all engines.
( 4 )
$56.69
On Sale
Connecting rods can be tough to hold securely without damage when removing the caps, replacing bolts, torquing the bolts, checking rod clearances, beam polishing, or during machining. Mr. Gasket connecting rod vises are ideal for holding one or more aluminum or steel connecting rods and can be permanently bench mounted or used with a shop vise.
( 1 )
$156.95
$86.95
On Sale
Mr. Gasket engine port polishing kits will allow you to do your own detailed porting, polishing, and flashing removal on all engine parts, with the use of an electric drill. They are designed to work with both cast iron and aluminum components. They include one tapered cutting stone, one 1 in. diameter mini-grind flex flat wheel, 31 assorted polishing rolls, and three various-length mandrels.
( 4 )
$84.49
$46.47
Get three tools in one with these spring-loaded, automatic-return safety wire pliers from Mr. Gasket. You get a cutter, a wire twister, and a heavy-duty pair of pliers. You can grip, twist, and snip safety wire faster and better than ever before. Designed for aircraft, industrial, and other vibrating applications, these pliers are versatile tools to help you do reliable safety wiring (lock wiring) rapidly and consistently.
( 5 )
$87.15
On Sale
These Fast-Fill funnels from Mr. Gasket are made of heavy-duty, unbreakable plastic. They feature a wide mouth and a narrow tube with a built-in brass screen filter.
Not Yet Reviewed
$26.34
$14.49
Mr. Gasket pin extraction tool sets are designed to release and extract GM, Ford, and Mopar OEM terminals from the factory housing, saving precious time and money during any electrical wire installation. The sets include one 0.050 in. narrow pick, one 0.090 in. wide pick, and one tubular extractor tool. The tools have color-coded plastic handles with durable steel tips and picks.
Not Yet Reviewed
$12.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
