Availability
Today we rely on more electronics in our vehicles than ever before, and running power to these extra electronics can be challenging and time consuming. Moroso multi-power battery terminal distribution blocks allow the installer more power options without cutting into the vehicle's wiring harness. Features: * Positive and negative terminals that have power connection points for ring terminals; 5/16 in., 3/8 in., and 1/4 in. * Can be used to replace factory battery terminals or as new battery terminals on a new build or remote battery installation Terminals are machined from billet aluminum and fit both SAE and JIS battery posts Includes hardware
( 17 )
$67.99
Moroso's universal dipstick kits are designed to work with Moroso and other brands of oil pans with a built-in 1/4 in. NPT dipstick provision. Moroso dipsticks feature a universal mounting tab that can be bent or modified to accommodate a wide variety of engine compartment clearances and mounting locations. The dipstick seals to the tube with an O-ring that secures it in place and prevents crankcase gasses from escaping. Moroso universal dipsticks also feature "full" and "fill" marks which can be used as-is, or new marks can be added to indicate your desired engine oil level.
( 87 )
$80.99
It's important to have a clean block, especially in the critical, hard-to-reach areas of the oiling system. Each of the brushes in these Moroso engine cleaning brush sets is designed for a specific purpose. They can be used on crankshaft oil holes, cylinder heads, etc. Their bristles are made of nylon, which cleans as well as wire but does not scratch.
( 58 )
$63.99
Moroso Perm-Align valve cover gaskets are manufactured from 30-durometer rubber, which is molded over and vulcanized to a rigid steel frame. They won't leak, blow out, or get sucked in, the way stock or inferior-quality aftermarket gaskets can. These gaskets feature superior-quality rubber and steel, which outlast cork-and-rubber composite designs to provide years of dependable service, especially if you frequently have to remove and reinstall the valve covers.
( 201 )
$56.99
—
$92.99
These Moroso Pro degree wheels are designed for the professional engine builder. They accurately measure camshaft centerline, valve timing, TDC, and BDC. Made from heavy-gauge metal with a silkscreen finish for long-lasting use, they include an adapter to fit virtually any engine.
( 40 )
$94.99
Add a stylish look and a dedicated performance edge with Moroso universal twist-lock dipstick kits. They are designed with an efficient twist-lock design to eliminate oil leakage and oil blowing out of the handle. These dipsticks have a brass adapter that can be adjusted upward or downward on the tube to suit the oil pan's depth and volume. The tube and universal mounting tab can be bent or modified to accommodate engine compartment clearances or mounting location. A rubber capping seal keeps the dipstick secure in the tube and prevents crankcase gases from escaping, and the existing "full" and "fill" dipstick marks can be used as-is, or new marks can be added to indicate the desired oil level.
( 23 )
$82.99
Moroso extended oil pump pickups are engineered to be "where the oil is" under the most demanding racing conditions. Designed for use with Moroso oil pans and constructed of steel, they are precision-bent and heliarc welded. A wire mesh steel screen, which is welded to the pickup box, traps debris without restricting oil flow.
( 127 )
$51.99
—
$98.99
Moroso external heating pads are excellent for the pre-heating of oil pans, tanks, and automatic transmission pans. They bring your oil up to operating temperature before each race for more consistent times, and are available with self-adhesive or hook/spring attachment methods. They have an etched foil design that distributes heat evenly, and a silicone outer shell that resists oil and dirt. Each heating pad includes an 18 AWG electrical cord with a plug for 110 V AC outlets.
( 11 )
$90.99
Moroso radiator overflow tanks holds a full quart capacity. They can be used in many forms of competition, are NHRA and IHRA accepted, and include hose fittings and a drain.
( 33 )
$51.99
Moroso oil pan gaskets offers race-quality, reinforced, and available for many popular engine applications. So, if you're tired of your car marking its territory in your garage or driveway, give one of these Moroso oil pan gaskets a try!
( 141 )
$57.99
—
$92.99
Made from 7075-T6 aluminum, Moroso U-Joint girdles have a unique design which provides more bearing surface for the universal joint bearing cap. The result is greater strength compared to conventional girdles. They have an anodized finish and come complete with fasteners.
( 45 )
$50.99
—
$81.99
Moroso V-belt crankshaft pulleys are CNC-machined from billet aluminum with a hard-coat anodized finish. They're designed to fit any 1 in. diameter crank-driven mandrel with 1/8 in. x 1/8 in keyway. Moroso V-belt crankshaft pulleys are available in 2.5 in. and 4 in. diameters.
( 5 )
$60.99
—
$96.99
Stuff your battery in Moroso sealed battery boxes and you can locate it just about anywhere you want on your vehicle and not worry about water, dirt, dust, etc. ruining it. Accepted by the NHRA and IHRA, these tough polyethylene boxes have an airtight lid with a foam gasket to keep battery gasses from entering your car's interior (six quick-release fasteners keep the lid on tight). These boxes come with a vent tube, a battery hold-down with 3/8 in. steel rods, rubber cable clamps and grommets, and mounting hardware.
( 45 )
$97.99
Moroso vacuum pump fittings are designed to fit Moroso's racing vacuum pumps. These fittings are made from aluminum and have a black or blue anodized finish. They feature a male O-ring that screws into the vacuum pump, and male threads for standard AN hose sizing.
( 9 )
$69.99
—
$85.99
Moroso's unique radiused air inlet design equalizes air pressure past the boosters for uniform air flow. Whether in triple chrome, anodized or powdercoated colors, these low profile racing air cleaners will provide more air flow and improve horsepower.
( 33 )
$86.99
These mounts are made for racing. Moroso solid steel motor mounts replace stock, OEM-style rubber mounts to prevent torque loss and binding linkages, a common result of excessive engine movement. These solid steel mounts eliminate the need for bulky torque straps and chains and are covered with a protective zinc coating.
( 135 )
$54.99
—
$83.99
Moroso engine block filler is designed to fill your block before the machining process Just fill with water, mix, and pour. It has an expansion rate very similar to cast-iron. It helps prevent cylinder walls from cracking, dampens unwanted vibrations, and improves piston ring sealing by keeping the bore round.
( 10 )
$96.99
Moroso no-weld oil fill cap kits provide an easy way of adding an oil fill to a valve cover without welding. And, since no welding is required, there is no possibility of heat damage. They're constructed from 6061-T6 billet aluminum with an O-ring and a finger grip cap with a black anodized finish and the Moroso logo.
( 7 )
$69.99
Moroso motor mount shim kits are used to make slight adjustments to engine height to compensate for minor oil pan, linkage, and header interference. They feature a standard Chevy bolt pattern.
( 9 )
$65.99
Moroso analog fuel pressure gauges are made with heavy-duty, stainless steel cases and bezels that won't rust, chip, peel, or oxidize like other similar designs. These instruments are not dampened by liquid, can be used with alcohol, and are accurate to within one percent. They can be mounted to fuel regulator or fuel block for convenient fuel pressure tuning. Moroso fuel pressure gauges deliver performance and accuracy. Gauge features and specs: * Available in three different psi ranges * Vibration-controlled dial * Compact 1.5 in. diameter gauge * Includes 1/8 in. NPT male fitting
( 41 )
$58.99
Moroso EFI fuel return line kits will allow you to convert to fuel injection without welding a return line or fitting into the gas tank. Just cut a 2.75 in. section out of any 2 in. fuel tank filler tube neck, and insert the billet aluminum adapter. Use the included Buna-N sleeves and four stainless steel hose clamps to seal the connection on each end of the adapter. They include a 3/8 in. aluminum fitting with a smooth 90 degree bend to direct fuel downward into the tank.
( 19 )
$69.99
Moroso wheel studs are manufactured from high-grade SAE 8740 steel to withstand shear loads of 190,000 psi. They are designed expressly for use with thick-hub racing wheels for both drag and Oval Track racing, and have quick start dog ends for easier starting of lug nuts. They're available in both press-in and screw-in styles.
( 186 )
$50.99
—
$62.99
Moroso offers manifold filler necks in a variety of styles, materials, and finishes—for applications from 1955 and up. These replacements locate the filler at the highest point to bleed off air on cars with low-mount radiators. The filler necks can be located on either the left or right side of the vehicle. They include 1/2 in. NPT fittings for the installation of a water temperature sending unit, and two 1/4 in. NPT fittings for return lines on popular aftermarket cylinder heads.
( 20 )
$62.99
—
$97.99
Moroso harmonic balancer tools use a pilot stud, which keeps the harmonic balancer perpendicular to the crankshaft's centerline, for a bind-free installation. Using a thrust bearing and protective washer, the drive nut can rotate freely, allowing the balancer to be pressed on easily.
( 95 )
$71.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
