Availability
Today we rely on more electronics in our vehicles than ever before, and running power to these extra electronics can be challenging and time consuming. Moroso multi-power battery terminal distribution blocks allow the installer more power options without cutting into the vehicle's wiring harness. Features: * Positive and negative terminals that have power connection points for ring terminals; 5/16 in., 3/8 in., and 1/4 in. * Can be used to replace factory battery terminals or as new battery terminals on a new build or remote battery installation Terminals are machined from billet aluminum and fit both SAE and JIS battery posts Includes hardware
( 17 )
$67.99
Moroso new Ultra 40 Race ignition wire sets are the most powerful and RFI/EMI-resistant wires available for racing today. Features of these 8.65mm wires include a Kevlar® core that's four times stronger than Aramid cores, a class-leading 40 ohms of resistance per foot, nickel copper alloy conductors for superior spark energy transfer, an extra-thick EPDM layer for greater dielectric strength, high-temperature silicone boots that can withstand heat up to 600 degrees, and locking stainless steel plug terminals. Plus, their closely woven fiberglass, silicone-impregnated insulation provides up to 8,000 extra volts of protection, and their extra-thick diameter extends wire life by adding additional insulation against heat, chaffing, and contaminants.
( 134 )
$31.99
—
$294.99
Moroso spark plug wire separators protect your plug wires from contacting hot engine components, and prevent ignition crossover by holding them away from one another. These separators snap into place with slight pressure and can be used to route wires just about any way you can think of. The high-temperature plastic separators securely grip the plug wires and are available in a variety of colors.
( 155 )
$16.99
—
$28.99
Moroso Universal Ultra LS/LT spark plug wire sets are perfect for installing remote-mounted coil packs. They're available in black in Ultra (350 ohm/ft.) and Ultra 40 (40 ohm/ft.) styles. Sets include eight 60 in. wires with coil ends pre-terminated, eight straight boots and terminals, eight 135-degree boots and terminals, and eight 90 degree boots and terminals.
( 3 )
$135.99
—
$166.99
Who said high quality and high performance can't be cost effective? Moroso Ultra ignition wire sets are equal to or exceed OEM specifications, depending on the application, without the dealer prices. Moroso has more than 50 years of experience in supplying spark plug wires to the top teams of NASCAR and NHRA, as well as auto manufacturers. These sets are available in different thicknesses and colors, assembled or not, with multiple boot end angles. Some models include high temperature sleeves. Order the ignition wires recommended for your application.
( 65 )
$32.99
—
$162.99
The new standard in ignition wires for racers on a budget! Moroso Ultra 40 unsleeved custom-fit ignition wire sets are the most powerful and RFI/EMI-resistant wires available for racing today. Plus, their closely woven fiberglass, silicone-impregnated insulation provides up to 8,000 extra volts of protection. Features: * Kevlar® core that's four times stronger than Aramid cores * Class-leading 40 ohms of resistance per foot * Nickel copper alloy conductors for superior spark energy transfer * Extra-thick EPDM layer for greater dielectric strength * High-temperature silicone boots that can withstand heat up to 600 degrees * Locking stainless steel plug terminals
( 142 )
$103.99
—
$225.99
Moroso offers Ultra 40 ignition wires—cost-effective versions of their race-proven wires without the heat sleeving. Sporting aluminum shields and available in a choice of wire colors, these Ultra 40 wires are an excellent choice to spark the energy you need. Moroso Ultra 40 ignition wires feature: * 40 ohms of resistance per foot * Highly engineered spiral-wound conductor * More energy to the spark plugs with less electrical interference * Silicone jacket protects against heat, chafing, and contaminants * Locking stainless steel terminals that fold over and crimp, stay connected, and won't vibrate loose like core crimped brands * Aluminum shielded spark plug ends are resilient to high temperatures
( 8 )
$68.99
—
$314.99
Moroso battery disconnect switches are designed to be the best quality switches available. They are perfect for engines with large starter draws, RVs, race cars with alternators, and more. They feature copper mounting studs, sealed shafts to keep out moisture and debris, an indexing pin alignment to prevent switch rotation, and a face plate. They fit panels up to 1/4 in. thick.
( 54 )
$57.99
—
$112.99
Moroso's Super Looms wire looms can help keep your engine bay looking neat and orderly—as well as prevent ignition crossfire by keeping the plug wires spaced apart. These looms place your spark plug wires safely out of the way of hot headers or exhaust manifolds. They feature chrome plated brackets for stout valve cover mounting, and high temperature plastic separator looms to securely grip the spark plug wires. Moroso Super Looms are available in a variety of colors and styles for fitment with most engines.
( 124 )
$28.99
—
$50.99
These Blue Max spiral core spark plug wire sets from Moroso are designed to be taken out of the box, fitted, plugged in, and raced. They're preterminated at the plug end only and include enough wire length and terminals (including the coil wire!) to fit both HEI and non-HEI distributors. They also include a wire-stripping tool to simplify the termination and, like all Moroso Blue Max wires, each wire is individually tested for unsurpassed quality control.
( 27 )
$72.99
—
$144.99
Whether you're relocating your battery to the trunk, or custom routing your battery cable, Moroso universal battery cables will do the trick. Their high-grade copper cable provides unrestricted current flow and comes in multiple color options. Their rugged insulation resists extreme under hood temperatures and chemicals like fuels and oils.
( 13 )
$149.99
—
$169.99
Stuff your battery in Moroso sealed battery boxes and you can locate it just about anywhere you want on your vehicle and not worry about water, dirt, dust, etc. ruining it. Accepted by the NHRA and IHRA, these tough polyethylene boxes have an airtight lid with a foam gasket to keep battery gasses from entering your car's interior (six quick-release fasteners keep the lid on tight). These boxes come with a vent tube, a battery hold-down with 3/8 in. steel rods, rubber cable clamps and grommets, and mounting hardware.
( 45 )
$97.99
Moroso super duty battery disconnect switches, with a rating of 2,000 amps intermittent and 300 amps continuous, are perfect for engines with a large starter draw, RVs, drag cars with alternators, and other applications. Two pairs of copper studs make these switches ideal for disconnecting alternators or other electrical devices in addition to the battery. They feature sealed shafts, which keep out moisture and debris, and the indexing pins align the switches with the mounting panels to prevent rotation. These super duty battery disconnecting switches include switch position face plates and decals to indicate switch location during emergencies. They are for use with Moroso push/pull switches for remote installations.
( 30 )
$106.99
Moroso spark plug indexing washers are designed for use on all 14mm spark plugs. They include 30 washers with three thicknesses to choose from. Washers will correct the electrode placement on any plug and simplify the time-consuming task of spark plug indexing.
( 48 )
$33.99
—
$34.99
Moroso remote push/pull battery and alternator disconnect kits allow you to disconnect both the battery and the alternator feed simultaneously without the need for relays. Required for many classes, including NHRA and SCCA, these easy-to-mount disconnect kits provide racers with an accessible on/off switch to completely shut-off electrical power in case of an emergency. Kit includes the following components: * Master disconnect switch * Brackets * Swing arm linkage * 18 in. long aluminum tube actuator link * All necessary bushings and fasteners * Switch position decals and switch location decal for the exterior of vehicle
( 2 )
$155.99
—
$209.99
Moroso battery terminal disconnect switches protect your vehicles solid state voltage regulator and alternator during battery charging. Moroso offers versions for both top and side post batteries that can be used on 12 or 24 volt electrical systems. They can even be used as a theft deterrent when your vehicle is unattended.
( 68 )
$29.99
—
$31.99
You can benefit from a stronger and more consistent trigger signal with Moroso crank trigger Ultra Series kits. These kits use a transducer mounting bracket, which allows for a better timing adjustment range over the others. Their damper register locates the crank trigger wheel to help keep it perfectly aligned and concentric as it rotates. Other product features include built-in strain relief, a double-cavity nylon connector, and powerful rare earth cobalt magnets.
( 4 )
$403.99
Custom-wiring your vehicle just became so much easier with Moroso toggle switch panels. Every switch panel has indicator lights and front mounted, E-Z access fuse holders with pigtails attached. They come with custom labels, so you can customize each panel to your individual needs.
( 63 )
$92.99
—
$211.99
Moroso ignition coil mount brackets are designed for use with Moroso valve covers, but can be drilled to be used with other valve covers, or to remote-mount coils in a different location. These coil bracket kits may be used to relocate the LS coil between the top of the valve cover and the intake, and when used with Moroso valve covers, the valve cover can be removed and installed without disturbing the coils or brackets. Two versions are available: one for LS1/LS6 coils and the second for LS2, LS3, LS7, L92, L98, and L99 coils. The kits include black anodized aluminum brackets and hardware (one kit does one LS engine).
( 1 )
$163.99
—
$346.99
These Moroso shrink sleeves will ensure a complete seal between spark plug boots, distributor boots, and any of the spark plug wire heat sheathes. They are sold in packages of 18, enough for a full set of spark plug wires, including an externally mounted coil.
( 6 )
$19.99
—
$33.99
Moroso Blue Max Spiral Core custom-fit wire sets have a special strategically-wound 304 stainless steel conductor and Kevlar core that reduces the ohms of resistance per foot, while delivering more spark energy, better EMI suppression, and a higher dielectric strength. A tough synthetic silicone jacket resists high temperatures and oils, and the extra-thick EPDM layer adds greater electrical insulation. Compact silicone plug boots provide extra header clearance and feature fold-over crimped terminals for a secure connection.
( 51 )
$97.99
—
$122.99
Moroso push/pull battery disconnect mounting kits allow you to mount a battery disconnect switch to a roll cage tube with a weld-on bracket, then actuate it with the provided T-handle protruding through the rear panel of the vehicle. They include the correct brackets, swing arm linkage, an 18 in. long black anodized aluminum actuator tube link, and the necessary bushings and mounting hardware for installation.
( 8 )
$93.99
Moroso advance curve kits have three sets of advance springs, which allows you to adjust the rate of spark advance from quick, to super-quick, to ultra-quick. Each weight and centerplate is precision-stamped with smooth edges to eliminate erratic timing. Each kit comes complete with installation instructions.
( 44 )
$19.99
—
$21.99
Moroso distributor shim kits are designed to adjust the distributor and improve timing accuracy while reducing wear. These kits are available for the distributor gear or the distributor housing. The distributor gear shims are made of steel and the distributor housing shims are made of nylon.
( 36 )
$12.99
—
$18.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
