Availability
Moroso super duty battery disconnect switches, with a rating of 2,000 amps intermittent and 300 amps continuous, are perfect for engines with a large starter draw, RVs, drag cars with alternators, and other applications. Two pairs of copper studs make these switches ideal for disconnecting alternators or other electrical devices in addition to the battery. They feature sealed shafts, which keep out moisture and debris, and the indexing pins align the switches with the mounting panels to prevent rotation. These super duty battery disconnecting switches include switch position face plates and decals to indicate switch location during emergencies. They are for use with Moroso push/pull switches for remote installations.
( 30 )
$99.99
Moroso battery disconnect switches are designed to be the best quality switches available. They are perfect for engines with large starter draws, RVs, race cars with alternators, and more. They feature copper mounting studs, sealed shafts to keep out moisture and debris, an indexing pin alignment to prevent switch rotation, and a face plate. They fit panels up to 1/4 in. thick.
( 54 )
$53.99
—
$104.99
Moroso battery terminal disconnect switches protect your vehicles solid state voltage regulator and alternator during battery charging. Moroso offers versions for both top and side post batteries that can be used on 12 or 24 volt electrical systems. They can even be used as a theft deterrent when your vehicle is unattended.
( 68 )
$26.99
—
$28.99
Custom-wiring your vehicle just became so much easier with Moroso toggle switch panels. Every switch panel has indicator lights and front mounted, E-Z access fuse holders with pigtails attached. They come with custom labels, so you can customize each panel to your individual needs.
( 62 )
$85.99
—
$197.99
Moroso push/pull battery disconnect mounting kits allow you to mount a battery disconnect switch to a roll cage tube with a weld-on bracket, then actuate it with the provided T-handle protruding through the rear panel of the vehicle. They include the correct brackets, swing arm linkage, an 18 in. long black anodized aluminum actuator tube link, and the necessary bushings and mounting hardware for installation.
( 8 )
$86.99
Moroso adjustable momentary switches have a 15 amp rating—ideal for operating trans-brakes or line locks on drag race cars. Their adjustable collar allows the plunger travel to be set from .020 in. to .219 in., making the switch "fast" or "slow" to suit individual reaction time requirements. These heavy-duty push-button switches can be through-panel mounted or affixed anywhere, using the two mounting holes provided.
( 10 )
$46.99
Moroso remote push/pull battery and alternator disconnect kits allow you to disconnect both the battery and the alternator feed simultaneously without the need for relays. Required for many classes, including NHRA and SCCA, these easy-to-mount disconnect kits provide racers with an accessible on/off switch to completely shut-off electrical power in case of an emergency. Kit includes the following components: * Master disconnect switch * Brackets * Swing arm linkage * 18 in. long aluminum tube actuator link * All necessary bushings and fasteners * Switch position decals and switch location decal for the exterior of vehicle
( 2 )
$143.28
—
$195.99
These Moroso shrink sleeves will ensure a complete seal between spark plug boots, distributor boots, and any of the spark plug wire heat sheathes. They are sold in packages of 18, enough for a full set of spark plug wires, including an externally mounted coil.
( 6 )
$17.99
—
$30.99
Moroso alternator shutdown relay kits are designed to stop engine run-on when the electrical master disconnect is turned off, by stopping electrical feedback in malfunctioning or high amperage alternators. They feature a heavy-duty solenoid rated at 250 amps, a mounting bracket, and terminals.
( 2 )
$126.99
Put control at your fingertips with Moroso rocker switch panels. They're available in a variety of styles and switch counts. Other options include fused circuits, circuit breakers, lighted and momentary rockers, and mounting locations. Choose the panel that's best suited for your vehicle application.
( 23 )
$151.99
—
$266.99
Moroso universal momentary switch cables feature a 15 amp rating and two 16-gauge wires enclosed in a protective PVC outer layer. They're ideal for transbrakes, brake line locks, and nitrous systems. The cables stretch to 4 ft. and spring back when relaxed.
( 5 )
$32.99
Moroso push button starter switches are waterproof and dustproof. They also have a neoprene cap for in-car or underhood mounting.
( 8 )
$20.48
These Moroso toggle switches are available as momentary switches. They're ideal for starting engines, or as on-off, single-throw switches used to control accessories such as lights, pumps, fans, etc. They come available in short and long-handled versions.
( 4 )
$17.99
—
$30.99
Moroso battery disconnect switch replacement components will have your disconnect operating again in no time at all. They are made of quality heavy-duty materials for optimum performance and a clean, finished look. For a solid, sure cut-off you can trust Moroso products.
( 4 )
$12.99
—
$28.99
These Moroso replacement rocker switches are designed to fit the Moroso rocker switch panels. They are available for the standard on/off or momentary switches. The rocker switches light up red, feature a 20 amp rating, and are made of durable plastic.
Not Yet Reviewed
$20.99
Moroso precision, high-quality momentary switches and coiled flex cables are used on roll control devices, nitrous oxide systems, as a push-to-talk button on radios, or in any other application where an instant on/off switch is needed. The snap-action, short-throw switches mount in a 1/4 in. diameter hole, and are rated at 6 amps at 28 V DC or 125 V AC.
( 1 )
$63.99
Moroso replacement 20 amp circuit breakers are designed to fit Moroso switch panel part numbers 74180, 74181, and 74190. They feature a high 20 amp rating that will work with most electrical systems.
( 1 )
$17.99
Moroso electric float switches allow single-point detection of coolant high/low levels through a sidewall of your tanks using "normally open" or "normally closed" contacts. Wire these 30-watt-rated switches into your OEM low-coolant-level circuits or use them as switches for aftermarket coolant-level lights. They include a bung so that the level sensor option can be added by drilling and welding to the coolant tank. The combination of highly skilled craftsmen and highly accurate machinery guarantees that the tradition of quality continues with each and every one of Moroso's products.
( 1 )
$57.99
Moroso ballast resistors are required for points-triggered ignitions equipped with coils that do not feature built-in resistors. They feature a ceramic base that supports the resistor to eliminate the possibility of electrical shorts and to help dissipate heat. Moroso ballast resistors feature a built-in mounting boss and 1/4 in. spade terminals that facilitate wiring to the battery side of the coil.
( 3 )
$16.99
Take your engine compartment to the next level with a Moroso aluminum fuse box dust cover. These fuse box covers are fabricated out of .100 in. thick aluminum with TIG-welded corners. They can be polished, chromed, powdercoated, or left as-is for a cool race look. They're easy to install--just fit them over a factory plastic fuse box lid.
( 10 )
$60.99
These Moroso flip-up toggle switch covers are designed to fit over your Moroso toggle switches and prevent them from being accidentally turned on. They are manufactured from durable plastic and have a bright red finish for quick, easy identification. Protect yourself and your toggle switch with one of these Moroso flip-up toggle switch covers.
( 1 )
$27.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
