Availability
Morimoto projector headlight conversion harnesses are designed to adapt the 2009+ Dodge Ram projector-style headlights onto trucks that came standard with the basic dual halogen headlamps. The harnesses enable you to upgrade to the most modern Ram look without cutting, splicing, or modifying anything on the truck's factory harness. It's a seamless plug-and-play solution to keep your low and high beams under control on the new OEM projector lights using the original controls inside the cabin. The outputs will plug directly into the multi-pin connector on the back of each headlight from Dodge. Note: These adapters are tested and work on OEM/TYC headlights. At this time, they do not work on DEPO aftermarket headlights.
( 2 )
$94.00
Morimoto's XB backup light boost bars complement their XB LED taillights, bolt-on easily, offer plug-and-play installation, and generates maximum output—in reverse! Morimoto XB backup light boost light bars rely on a combination of optical refinement and raw power to produce the perfect reverse light beam pattern. The optimized lens distributes the most possible light in the most effective beam pattern based on typical surface mounting angles. The bar is filled with 54 CREE J Series 2835 LEDs rated at 4500K/80CRI and a 180mA driver that produces 29.9 watts of maximum power to pump out 2,700 raw lumens--that's translated into 1,950 real lumens after transmission through the optical lens. If you are running the XB taillights the boost bar will be easy to setup, but even if you are not, the kits include 1.5 meters of integrated wiring and a high-quality tap kit to draw 12 V from your factory reverse light harness. An integrated rubber grommet is included to keep moisture and dust out of a pass-through hole, if necessary, too. The light bar bolts onto your vehicle's top two license plate mounts and features a diecast aluminum housing contoured according to the geometry of US-spec license plates for a flush fit. The mounting points are positioned according to the same universal standard, and the system is finished in a satin black powdercoat.
( 2 )
$85.00
On Sale
Revolutionize your driving experience with cutting-edge lighting technology! Crafted after a year of relentless innovation, Morimoto 2Stroke 4.0 LED bulbs redefine clarity and safety on the road. They boast unparalleled beam quality, replicating the original optics pattern while reducing glare for oncoming traffic. With a slender 1.45mm emission surface, advanced PCB technology guarantees optimal performance. Achieve precise beam distribution with the filament-sized accuracy of the 2Stroke 4.0s, making every drive secure and well-lit. Their adjustable base accommodates diverse reflectors, and the built-in cooling system ensures longevity even in extreme conditions. Upgrade now and illuminate your journey with confidence. Order the replacement bulb style recommended for your vehicle. Additional details: * Designed and engineered by Morimoto in California, the 2Stroke 4.0 is packed with more patented, innovative features than any other bulb on the market today * Perfect Focus: The ceramic PCB and Osram HJL LEDs help illuminate the road more effectively, with zero glare to oncoming traffic * Heat Exchanger: Cools the bulb while warming the ambient temperature inside of the housing, increasing resistance to snow/ice buildup on the lens during the winter months * Designed and built with OE-grade materials
( 3 )
$120.00
—
$123.00
$96.00
—
$98.40
Morimoto XB LED side markers should make you second guess simply adding LED bulbs to your stock housings. These units are well-built, have an infinite lifespan, an unbeatable warranty, and out-perform other options—making them the best Corvette side marker lights on the market today. They're available in different light colors and for specific Corvette models. * BRIGHTER: You've already done an LED upgrade to the headlights, the fog lights, and the taillights on your Corvette, so does it make sense to keep the side markers stock? No way. Now you can complete the package and make sure everything matches, both in terms of output intensity and purity in color with these assemblies. With high-powered Osram LEDs behind the optical lens, they'll be much more effective both day and night compared to the OEM setup. * DURABLE: Their UV-coated polycarbonate lens will resist the test of time, ensuring that they look good as new for many years to come. To save on cost, the cheap alternatives do not use a UV-coated PC lens—and that will become obvious, quickly. We've seen them fade within a matter of months. Spend a few bucks more now, save yourself the hassle of swapping out later. * PLUG-N-PLAY: Again, there's no comparison between the Morimotos and the generic. When it comes to wiring, these are far better quality. The Morimoto LED side markers are designed to work without any modifications. They will plug into the factory connectors. No error codes, no flickering, hyper-flashing, or radio interference. They can easily be removed and will not void your factory warranty. * BENCHMARK: Morimoto—the Automotive Lighting Benchmark. This company is globally recognized as the brand to beat when it comes to lighting upgrades for the automotive aftermarket. No other brand blends performance, quality, and style quite like they do. Their vast product line covers today's most popular trucks and cars.
( 1 )
$62.00
—
$107.00
Morimoto Off-Road 2-Pod Power Harness Kits feature a triple-sealed propriety 4-pin relay with hanger; an over-molded inline fuse holder with 20 amp mini-fuse; DTO6-2S female outputs with dual seals; stainless steel power and ground terminals; and an M-Spec push button switch with yellow-LED backlight. All wiring is properly sized and relays rated for flicker-free, reliable power delivery. Every line of the 16 awg copper wiring is protected with black mesh insulation. Every connector has been over-molded, sealed, or protected with heavy-duty heat shrink. Other details: * PLUG N PLAY: The connections on the harness are laid out in a logical way to power an LED pod on each side of your vehicle. There are two Deutsch outputs, a positive battery terminal, a ground terminal, and a switch. The wiring for the in-cabin push button switch has an inline barrel connector that drastically improves ease of installation. * COMPATIBLE: While this harness is a perfect match for the Morimoto 4Banger LED pods, you can make good use of it with any other off-road lighting setup that takes a DT-style 2-pin input (which is basically the industry standard).
( 1 )
$97.00
On Sale
Morimoto offers XB Bi-Xenon light bulbs in a variety of styles. In fact, nothing compares to the Morimoto XB HID lineup. Compatible with 35W and 55W, the XB's will produce more lumens, last longer, project farther, and look better doing it. The XB Bi-xenon bulbs use a magnetic solenoid in their base to change the focal point of the bulb to produce a secondary pattern. Simple, and effective - they work well in most fog lights to provide more light in both modes. At the heart of the XB bulbs is their perfectly aligned 100 percent Philips quartz glass that houses a capsule from APL-USA. Using high-quality halide salts, the bulbs produce nearly the same luminosity (intensity) as the amazing Osram CBI bulbs at 5500K. Plansee electrodes help keep the bulbs running brighter for longer. After 200 hours of use, Morimoto bulbs will maintain 83 percent of their intensity. Morimoto's Symmetry-Structure frame surrounds the base of the glass capsule, keeping everything properly lined up—wich is paramount when it comes to HID bulbs. The XB HID bulbs are built to industry-standard size specifications and are compatible with all ballasts with "AMP" outputs, making them a perfect match for a replacement bulb or upgrade!
Not Yet Reviewed
$75.00
—
$106.00
$60.00
—
$84.80
On Sale
Morimoto Micro D2S 5.0 projectors offer the best of both worlds with the beam pattern of the Mini D2S 5.0 inside a Mini H1-sized package. The Micro D2S 5.0 projectors' beam pattern is perfectly distributed with a natural gradient of intensity down to the foreground, and the high beam is hard to beat. The lenses have a blue tint--an AR coating that increases the transmission of light through the glass while decreasing bleed, resulting in 10 percent more light and less glare compared to a traditional clear lens. They come standard with the MotoHolders--a one-piece design that's far easier to work with than the bulb holders found on no-name brand projectors. Finally, they also include CNC-machined aluminum lock rings that are great looking and 300 percent stronger than the old diecast part, and Torx screws for the lens holder instead of Philips screws. Choose a set for your vehicle.
Not Yet Reviewed
$90.00
$72.00
Morimoto XB LED headlight adapters allow you to upgrade your existing units. These headlight adapters retain all OE functions and make installation of the XBs a simple plug-and-play operation. Morimoto headlight adapters are vehicle-specific, choose the correct XB LED connection for your vehicle.
Not Yet Reviewed
$55.00
—
$109.00
On Sale
Morimoto XB ballast resisters are designed to last for 2,500 hours. Their powerful AS15-G4 IC chip recognizes outside system faults, such as a loose high-voltage connection, and after one misfire will cut power rather than potentially self-destruct. The software is proprietary to this ballast alone. Additional features include: * PROTECTED: The diecast aluminum shell houses a 100 percent potted circuit board, eliminating any chance of moisture damage. The AMP SuperSeal 3-pin connector from TE Connectivity between the igniter and the ballast ensures the safety of this crucial output. * COMPACT: The slim 18mm body will mount almost anywhere. There are four mounting points cast directly into their shell, no spare brackets to mess with. * VERSATILE: Since the igniter cord can be unplugged from the HID ballast computer, you can easily change from AMP to D2S or vice-versa (without the use of unreliable adapters, that is). Likewise, if an igniter does happen to go bad, it can easily be replaced. * FAST, FRIENDLY AND EFFICIENT: Power hungry HID ballast replacements never work well with tricky CanBus systems, but the new Morimoto XB35 2.0 ballast consumes less than HALF of the start current that the previous model did. Far less than Denso, Mitsubishi, or FastBright—which makes their ability to reach full intensity a more efficient process. * MODERN: Like all modern OEM ballasts, the XB has relocated igniters far closer to the HID bulb. The lack of high voltage transmitted through wiring drastically reduces EMI/RFI (radio interference). Total system reliability is also improved by shielding the main circuit board from the static produced by these high voltage bursts on start up. * FUNCTIONAL WORK OF ART: Morimoto XB35 2.0 HID ballasts are just as good looking on the outside as they are well-engineered on the inside. Stainless steel hardware. TechFlex braided insulation. Embossed circuitry on the shell. * MATURE: The XB35 2.0 features countless advancements from the most popular OEM ballasts. In terms of modern headlight tech, High Intensity Discharge is now fully matured; and therefore the aftermarket gets the full benefit engineering progress in the OEM world.
Not Yet Reviewed
$89.00
$71.20
No doubt the aluminum F150 is a capable truck, and if you've already upped the ante by making more power, new wheels, and fatter tires, then it's time to ditch the stock lighting setup too. Morimoto's unbeatable XB LED fog lights have been top sellers forever, and now the lineup expands with offerings such as the new high performance XB LED taillights! * COMPATIBLE: With all Non-BLIS F150s from 2015-20, these complete taillight assemblies will swap directly in place of the original F150 taillights, use all of the stock mounting points, and should only take around 30 minutes to install. * PLUG-N-PLAY: Wiring is easy too! The XB LED tails are designed to work without any special wiring (2018-20 do require the optional harness). They will plug into the factory connectors for the stock lights; and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug-n-play install. No additional resistors, modules, etc. needed! NOTE: 2018-20 F150S REQUIRE THE OPTIONAL HARNESSES, HOWEVER THESE ARE STILL NOT COMPATIBLE WITH OEM LED OR OEM BLIS TAILLIGHT-EQUIPPED TRUCKS. * STYLE: While they look radical, they don't look out of place like other aftermarket options. The geometry flows with the body lines like a boss. The XB LED tails for your F150 are available with either a smoked or red lens. Both will illuminate red. * WELL-BUILT: Their durable polycarbonate lens will resist the test of time, keeping the housings looking new for many years to come. The injection molded ABS housing is lightweight and much stronger than comparable cheap alternatives. The XB taillights may not be the cheapest new taillights for your F150, but they're OE quality.
Not Yet Reviewed
$56.00
Morimoto offers 4Banger fog light mounting brackets for different areas of your vehicle, including the A-Pillars and front bumper. They're machined from durable materials, with a finish that will withstand extreme weather. Order the pair recommended for your application.
( 2 )
$94.00
Morimoto offers custom trim sets for several of their headlight assemblies. These ABS plastic replacements are available in a black or chrome finish to complement your truck. Order the stylish trim pair recommended for fitment on your vehicle.
Not Yet Reviewed
$88.00
—
$91.00
On Sale
Morimoto XBT Bluetooth RGB controller harnesses provide plug-and-play installation and complete control with a proprietary app that works with both iPhone and Android devices. The app features a color wheel that gives you virtually infinite control over the exact hue and intensity of your RGB accessories. Adjustable Fade, Strobe, and pre-programmed color-changing themes provide a handful of special effects to spice it up. And you can save your favorite combinations to pull up later. Morimoto XBT Bluetooth RGB controllers are capable of operating up to three different zones/pairs of RGB accessories—apply a different color or effect to each zone, or lock them together to easily apply the same settings across the board. For safety and convenience, when the XBT System powers up it defaults the output to white. The power to control your RGB accent lighting will be in the palm of your hand with Morimoto XBT Bluetooth controllers.
Not Yet Reviewed
$105.00
$84.00
On Sale
Morimoto X5-R 2.0 Switchback LED projector shrouds mimic the style of modern headlights with excellent coverage, integrated switchback LEDs, and an attractive look. Made with the highest quality plastic and durable metalized chrome finish, the X5-R 2.0s will mount directly to all standard/generic and Morimoto projectors with a normal centric ring. Simply press-fit the centric ring on the back, add some epoxy to make sure it stays put permanently, and press-fit to the front of your projectors (some trimming may be needed for retrofitting). Morimoto X5-R 2.0s have a Type II White/Amber Switchback LED circuit built into the integrated acrylic halo on the front, so there's no need for any extra LED halos or accent lighting. They are also DRL ready. Their bright white LED function can also be dimmed when your low beams turn on by hooking up the "dim" wire to your low beam power circuit for fully compliant functionality.
Not Yet Reviewed
$98.00
$78.40
On Sale
Morimoto EVOX-R 2.0 projectors deliver great performance and fit to upgrade older bi-xenon HID projectors. EVOX-R 2.0 projectors come standard with a 3 in. clear lens and a mirror finish reflector bowl to produce an intense hot spot of any projector in the Morimoto lineup. Plus, their bolt pattern is identical to older 3 in. halogen, xenon, and bi-xenon HID projectors, making each one a direct bolt-on upgrade in many OEM or aftermarket housings that use these designs. The bulb holders are also compatible with D1S, D2S, and D3S bulbs. Whether doing a retrofit or a direct swap out for the old, Morimoto EVOX-R 2.0 projectors are winners. Choose a set for your vehicle.
Not Yet Reviewed
$79.00
$63.20
Morimoto XB LED license plate lights are well-built, have a virtually infinite life span, an unbeatable warranty, and out-perform other options—making them the best license plate lights on the market today. No doubt your original license plate lights look fine, but if you have upgraded the power, wheels, and tires, isn't it time for a high-performance facelift on the rear of your vehicle, too? Morimoto offers the perfect choice in their XB LED license plate lights to complete your vehicle's new attitude. With high-powered Osram LEDs behind the optical lens, they will be much more effective, both day and night, compared to the OEM setup. While the Morimoto LED License plate lights may cost a bit more relative to other options in the aftermarket, their fit and finish is far superior to everything else out there. No other brand blends performance, quality, and style quite like Morimoto does. Their vast product line covers today's most popular trucks and cars. So, what are you waiting for? Set your ride apart from the others on the road with these head turning license plate lights from Morimoto. Order the license plate lights for your application. Additional attributes: * Compliant with road safety standards * Available in different light colors and for specific vehicle models * Durable housings with UV-coated polycarbonate smoked lenses * High-quality, long-lasting LEDs * Makes license plate more visible * Designed to work without any modifications * Easy installation—simply plug into the factory connectors * No error codes, no flickering, hyper-flashing, or radio interference * Can easily be removed and will not void your factory warranty
( 5 )
$56.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
