Availability
These Milodon stainless steel oil dipsticks are CNC-machined from billet stainless steel to stay bright and rust-free. All dipsticks feature an O-ring seal top and bottom to positively seal against water & dirt. The braided stainless steel hose will flex around headers, tube mounts, and anything else in the way.
( 180 )
$92.95
—
$99.95
Milodon oil pump pickups are engineered for maximum flow and long-term durability, even in the most extreme applications. They use precision-bent, thick-walled tubing with a larger-than-stock inside diameter—which is heliarc-welded to Milodon's own high-flow, compact-design pickup head. All oil pump pickups receive either a gold iridited or black powdercoat finish for ultimate durability against corrosion. Over a hundred models are available; order the pickup recommended for your year/make and engine application, oil pan style and depth, and other options.
( 231 )
$50.95
—
$99.95
Milodon windage tray stud kits are required to mount a windage tray assembly correctly. The adjustable mounting feature allows you to position the tray as closely as possible to the rotating assembly (minimum 1/10 in.), so the tray can work at its maximum potential. You can also adjust your tray to avoid interference with the oil pan (special torquing requirements apply, and the tray must lie naturally flat after positioning nuts are torqued). These fasteners are available individually or in larger quantities, and are designed for fitment on a wide range of make/model engine applications.
( 39 )
$83.95
—
$93.95
A good oil pump is the cheapest insurance you can buy. Milodon small block Chevy high/standard volume oil pumps were built with engineering expertise to provide the highest level of quality and reliability available. The improved housing is made of a G-10 material with 40,000 psi tensile strength. G-10 is the same rugged material that brake rotors are made of. The neck is thicker than standard pumps to improve strength and end pump neck breakage under severe conditions. They're engineered to perform well in low or high-rpm applications and are CNC-machined for precise tolerances. Every pump is 100 percent flow-tested.
( 33 )
$96.95
—
$99.95
• Milodon’s exclusive high efficiency impeller design is installed into new GMB castings using heavy-duty bearings and large-diameter shafts. It is the impeller that makes the pump work so much better than a standard, stock design water pump. • Milodon water pumps are available in high-volume (steel or aluminum) and standard-volume versions Pumps are direct factory replacements with OEM hose connections and bosses. • These high-volume pumps have a balanced distribution design (equal flow to both sides of the engine block) and a high-efficiency impeller that increases coolant flow up to 30 percent over stock. • These features increase coolant pressure in the block to prevent hot spots and air pockets and improve coolant flow in the radiator. • A high-flow thermostat is recommended when using a high-volume pump.
( 220 )
$62.95
—
$96.95
Ideal for street and strip applications, Milodon windage trays are specially contoured for a good fit. They permit rapid oil return and protection from oil splash-back, while providing increased power. They are available in either a solid design with louvers or a high-tech screen design.
( 96 )
$78.95
—
$99.95
Do you have a new timing cover, or one that lacks a timing pointer? If so, then you clearly need a great looking pointer to complete the package. Milodon has the perfect accent to your timing cover. They will look great with your cover and are marked off with a wide span of degrees both before and after TDC, so you can get the precise timing setting that you need.
( 52 )
$72.95
—
$82.95
Milodon Vac-U-Pan systems are a highly effective method of achieving optimum power through significantly reducing oil pressures. The breather of the units attaches to the valve cover and the probe is inserted into the header. Exhaust scavenging pulls pressure and blowby out of the motor. These complete kits include breathers, check valves, and weld-in nipples.
( 16 )
$80.95
Milodon premium roller timing chains are equal to and, in most aspects, exceed OEM-quality specifications. They feature a double-wide non-split roller design to allow for easier chain movement, yielding increased performance and longevity. These timing chains come in application-specific designs to ensure an exceptional fit, superior strength, and quality performance for your ride.
( 9 )
$87.95
—
$94.95
Milodon high volume/high pressure oil pumps provide a 20 to 30 percent increase in both volume and pressure, where most heavy duty and performance applications require an increase in both areas. Increased bearing loads, rpm, and horsepower all place greater a demand on the oil system, which if not up to the job, can cause premature engine failure. All Milodon oil pumps are 100 percent flow-tested to assure you the quality your engine demands.
( 28 )
$84.99
Swap out your leaky stock timing chain cover with one of these stylish, high-quality Milodon timing covers. CNC-machined from quality steel, each timing cover is precision-checked for the proper placement of the seal and dowel pins to avoid leaks and to ensure an exact fit. Order the model you need.
( 106 )
$69.95
Milodon rocker arm studs are made from 8740 chromoly steel and are heat-treated to 180,000 psi tensile strength. With an extra-large radius base, they are more resistant to flex and will provide a more positive seating. These screw-in rocker arm studs are made for roller rocker arms.
Not Yet Reviewed
$51.95
Milodon extra-long wheel studs, which are a must for racing applications, are designed for thick-centered racing wheels and wheel spacers. All are made from premium 8740 thread-rolled, heat-treated, Grade 8 quality steel.
( 11 )
$56.95
Milodon externally adjustable oil pressure regulators will allow you to adjust the oil pump pressure without removing the oil pan or oiling system. They feature a spring-activated, stainless steel pressure valve that is adjusted by an external stud and bolt assembly.
( 6 )
$65.95
Milodon rugged crushproof premium oil pan gaskets can be used with gasoline, alcohol, and race fuels. They won't crush, split, shrink, or squeeze out like other gaskets. What's more, Milodon says you couldn't tear them, even if you tried.
( 131 )
$50.95
Simple logic says that one of the best ways to avoid oil pan leaks is to make the pan gasket one piece. That's the philosophy behind Milodon's one-piece pan gaskets. They end leaks at the corners, where multi-piece gaskets often fall down on the job. Molded in one continuous piece of rubber, with steel inserts around each bolt hole, the bolts can be securely tightened but not over-tightened. Because of this construction, these gaskets are reusable.
( 22 )
$50.95
Overcome space limitations and change your filters with ease. Milodon oil filter adapters make oil filter changes quick and easy. They're made from high-quality materials to ensure durability.
( 10 )
$69.95
—
$94.95
Milodon lifter valley baffles prevent hot oil from splashing on the intake manifold, thus eliminating power loss. They keep surplus oil out of valve covers by eliminating oil splash from lifter bores, and maintain oil pressure (during pushrod or rocker arm failure) by keeping lifters in their bores, except with roller cams.
( 10 )
$50.95
Milodon oil pump rebuild kits are designed to keep your oil pump operating properly. They include all necessary parts to overhaul your pump. Milodon oil pump rebuild kits are available for Mopar Hemi and big block engines.
( 1 )
$52.95
Milodon freeze plugs will not rot out, like lower cost steel ones. Your new engine assembly deserves the best. Don't get stuck trying to replace a leaking steel freeze plug behind a motor mount a year or two from now. Milodon freeze plug kits include all of the necessary external block freeze plugs, and cam and oil galley plugs for one complete engine.
( 48 )
$55.95
Milodon bellhousing studs are thread rolled, starter nosed fasteners that make aligning and installing your transmission or scatter shield a snap. Just slide them up into place. No more fighting to get a bolt started, while hoping it won't slide off the dowel pin. The stud sets include small diameter 3/8 in. hex nuts for easy access and heat-treated lock washers.
( 1 )
$59.95
Milodon replacement studs can be used anywhere in your engine. They feature 190,000 psi tensile strength for maximum performance. The studs are manufactured from high-grade 8740 chromoly and have a black oxide finish for durability inside or outside of the engine.
Not Yet Reviewed
$51.95
—
$52.95
Milodon offers nearly 20 types of timing gear drive replacement parts for specific year/make and engine applications. Direct-fit components include cam covers, gears, and hubs; crank gears; bushings, bearings, seals, and hardware; main housings; idler axles, gears, and retainers; mounting plates and more. Order the replacement parts recommended for your timing gear drive.
( 9 )
$54.95
—
$98.95
These Milodon bulkhead fittings are made from high-quality anodized aluminum to precise aerospace tolerances. They give you an easy way to connect lines through firewalls or frames.
( 1 )
$63.95
—
$67.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
