Availability
Melling offers their engine cylinder deactivation kits for converting active fuel management engines to non-active fuel management versions. These AFM (active fuel management) or MDS (multi-displacement system) delete combos include a variety of components to help complete the changeover. Order the Melling AFM/MDS delete combo best suited for your application. Each kit includes: * MDS delete camshaft (1) * Non-MDS hydraulic roller lifters (16) * Lifter guides for Non-MDS engines (4) Application dependent components include: * AFM/MDS solenoid plugs (4) * Camshaft thrust plate (1) * Variable Valve Tming (VVT) oil control valve (1) Notes: * When installing a delete cam, the active fuel management lifters must be replaced using non-active fuel management lifters. * The valve lifter guides used in non-active fuel management engines differ from those used in active fuel management engines and must be replaced for this application. * The AFM/MDS solenoids must be replaced using non-MDS plugs. * The vehicle engine control module/powertrain control module must be reprogrammed to turn off the active fuel management system in the operating software. * Pushrod length must be checked during installation to verify the correct length.
( 4 )
$634.99
—
$636.99
Restore your engine to its true power potential with Melling's stock replacement cam and lifter kits. They're perfect for either replacement or stock rebuilds. Melling cam and liter kits also include a matched set of lifters so you won't have to worry about mismatched parts during installation.
( 20 )
$532.99
—
$718.99
Melling M-Select Class 1 camshafts are part of their full line of high performance camshafts graded from Class 1 to Class 4. Class 1 camshafts have durations of 200 to 215 degrees at .050 in. lift. They feature good idle quality with strong low-rpm torque and midrange performance. These cams will work well with stock or slightly modified engines with either manual or automatic transmissions. M-Select Class 1 camshafts may have lower vacuum than OE camshafts.
( 33 )
$502.99
—
$646.99
If you are serious about building the ultimate wet sump system, then these Melling one-piece billet aluminum oil pumps with their integral screen pickup are the only way to go. These pumps not only eliminate the potential disaster of the oil pump pickup falling off, but they also offer smoother oil flow with less internal drag, resulting in an actual increase of 5 to 6 hp. Melling Select billet aluminum oil pumps will fit in your existing Moroso, Milodon, and Stef's wet sump pans, there is no need to buy a new pan or to modify your old one. Melling Select billet aluminum oil pumps offer the absolute latest in cutting-edge technology. Additional features include: * Billet aluminum housing and cover with anodized hardcoat * Standard or high volume billet spur gears * Multiple pressure settings * Chromoly driveshaft extended into the pump cover for support * Integral pickup screen assembly with stainless steel wire mesh * Robust CNC-manufactured design * Chromoly intermediate shaft, optional pressure relief springs, and instructions
( 2 )
$552.99
—
$598.99
Melling's years of experience are apparent in these Performance oil pumps. They boast a CNC-machined body and cover and hardened steel gears that are up to 25 percent longer, providing additional flow to performance engines with wider bearing clearances. Their drive and idler shafts have been extended into the cover to provide additional support and eliminate dynamic shaft deflection.
( 190 )
$558.99
—
$590.99
Melling retrofit hydraulic roller lifters are designed for street performance enthusiasts who want to upgrade to a hydraulic roller camshaft. They are manufactured to fit early or late model blocks, including blocks with tall lifter bosses.
( 1 )
$737.99
—
$793.99
Why waste time installing an old, worn-out oil pump when you can get a brand new Melling replacement oil pump at such a low cost. They're manufactured from a variety of high-quality materials with all-new components—and are individually hand-turned and pressure-tested to guarantee that they'll perform as well as OEM. These pumps are available in various styles, pressures, and volumes (some include an oil pickup). Find the model designed for fitment with your vehicle and engine.
( 314 )
$541.99
—
$756.99
Melling timing chain sets are designed for use with either performance or stock cams. They have a solid-bushing chain for a true bearing surface that rolls with the sprockets, eliminating chain stretch. The crank gears are machined from stress-proof steel. Most Melling timing chain sets have three keyways to ensure accurate timing for early or late model vehicles, and to allow you to set the cam timing at 4 degrees advanced, 4 degrees retarded, or stock. However, 50-state (stock replacement) sets have single keyways. The chains are available in several styles, such as single or double roller, single non-roller, and link belt. Melling timing chain sets are not for use above 6,500 rpm. Order the model designed for your vehicle application.
( 133 )
$526.99
—
$644.99
Melling high-volume oil pumps give you an additional 20 to 25 percent of much-needed oil volume for your performance application. For those of you who need added pressure, many pumps are supplied with a high-pressure spring (where noted). The pumps are built using a proprietary casting process, which yields maximum performance and reliability. Every Melling oil pump is completely pressure-tested, including idle and bypass pressure, before it leaves the factory. Dozens of models are available for fitment; order the pump and options needed for your vehicle.
( 351 )
$515.99
Perfect for replacements or stock rebuilds, Melling stock replacement camshafts can restore your engine's true potential. They're available in a variety of styles, including hydraulic flat tappet, roller tappet, and roller follower; and mechanical flat tappet. Melling offers affordable, quality engine parts, including a full line of cams for cars, light trucks, and imports as far back as the mid-1950s. If you want quality that you can count on at a price that's hard to beat, order the Melling stock replacement camshaft designed for fitment on your vehicle.
( 18 )
$512.99
—
$582.99
To make your selection of the desired combination of camshaft, actuators and solenoids easier, Melling offers stock replacement cam and actuator kits that provide the camshaft, actuator and solenoid for your engine application in one convenient package. Replacing the actuator and solenoid with the new camshaft helps ensure additional engine power when needed while restoring fuel economy through engine efficiency. Melling camshafts, actuators and solenoids are quality manufactured to assure a proper installation every time—and precision engineered for dependable, worry-free operation. These kits are available for a wide range of vehicles, including many Ford, Lincoln, and Mercury models.
Not Yet Reviewed
$638.99
Melling cam and spring kits are designed for the perfect upgrade of your stock camshaft. Melling cam kits will provide a smooth idle, good low-end torque, excellent pulling power and come matched with a set of valve springs to help take the guess work out of picking parts for your engine. Rebuilding or upgrading your engine? Try one of these Melling cam and spring kits for maximum reliability.
Not Yet Reviewed
$660.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
