Availability
MoS2 anti-friction engine treatment by Liqui Moly ensures immediate friction and wear reduction, adds a protective and pressure-resistant boundary layer with low friction, and lubricates during cold starts to prevent damage from lack of oil. It also contributes to lower fuel consumption, longer engine life, and fewer noises thanks to a specific formulation for older engine designs with or without a turbocharger. Liqui Moly MoS2 anti-friction engine treatment provides miscibility with most commercially available motor oils and provides safe interaction with catalytic converters and particulate filters (GPF/DPF).
( 3 )
$8.99
Liqui Moly Radiator Cleaner removes deposits in cooling systems of all water-cooled engines. It removes scale, grease, sludge and other deposits to allow restored performance and proper cooling performance. This radiator additive is suitable for all coolant and heating systems. Additional notes and benefits: * Removes oil and greasy residue * Chemical conversion of lime * Does not contain acids or alkali * Compatible with antifreeze * Neutral behavior on rubber and plastics * Neutralizes acids * Disperses sludge * Engine coolant flush How to use the product: Add contents to the cooling water. Turn the heating to maximum and let the engine run on idle for 10 - 30 minutes, depending on the degree of contamination. Drain the coolant and flush the cooling system with water. Fill the cooling system according to the manufacturer's instructions. The content is sufficient for 10 liters (2.6 gallons) of water; a minimum of 4 liters (one gallon) is required for optimum product performance.
Not Yet Reviewed
$9.99
Liqui Moly Jectron fuel injection cleaner cleanses both injectors and the combustion chamber while also protecting against corrosion. A combination of additives clean and maintain the fuel system of port-injected and carbureted gasoline engines, helping to restore proper fuel atomization and improved engine efficiency. Regular use of this product helps keep your vehicle's fuel system in perfect working order. Suitable for use in all 4-stroke gasoline engines—with or without turbochargers—Liqui Moly Jectron fuel injection cleaner provides safe interaction with catalytic converters and particulate filters (GPF).
( 1 )
$9.99
Brake fluid DOT 5.1 by Liqui Moly offers a synthetic formulation based on a unique mix of agents that guarantees full functionality even during extreme conditions. It also provides a higher wet and dry boiling point compared to DOT 3 and DOT 4 brake fluids, plus unique inhibitors that deliver corrosion and oxidation protection at high temperatures. Additionally, Liqui Moly brake fluid Dot 5.1 contains special scavengers that suppress steam at increased moisture levels.
Not Yet Reviewed
$8.99
Liqui Moly Pro-Line Injector and Glow Plug Grease is a part synthetic and metal-free specialty grease designed specifically to lubricate injectors, spark and glow plugs as installed. When used properly, this grease creates a moisture barrier which protects the outside of injector and glow plugs from corroding and assists in removal when repair is needed. Product features and details: * Prevents seizing and cold welding * Especially resistant to cold and hot water * Excellent corrosion protection * Highest load-carrying capacity * Does not attack common sealing materials * Non-toxic * Resistant to certain organic acids and alkalis * Areas of application: Used for lubrication of any high-load sliding surface and to allow separation of components subjected to extended heat stress such as injectors, spark and glow plugs, pins and fasteners. * Application: Only apply to clean and moisture free components. Apply a thin and even coat using finger, brush or lint-free cloth. Use the appropriate amount to achieve necessary coating thickness for proper protection.
( 1 )
$6.99
Liqui Moly Speed Tec gasoline fuel additive is a high-tech fuel additive developed specifically for improved throttle response under partial engine load. It optimizes fuel atomization and combustion, and cleans the fuel system while providing maximum engine performance and efficiency. Liqui Moly Speed Tec gasoline fuel additive is suitable for use in all 4- and 2-stroke gasoline engines, with or without turbochargers. It is safe for use with catalytic converters and particulate filters (GPF).
( 2 )
$8.99
Liqui Moly LM 48 installation paste can be used for assembly of engines, gearboxes, industrial machinery, or for press fitting. It uses a synergistically active and unique solid lubricant system of zinc sulfide, graphite, fluorides, and tungsten disulfide. Features: * Very adherent on polished surfaces * Use on engine bearings, piston skirts, camshaft lobes, etc. * Prevents dry-run damage at start-up * Allows easy assembly of tight-fitting parts * Provides protection from scoring during press-fit * Service temperature: –31 to +842 degrees F (-35 to +450 degrees C)
Not Yet Reviewed
$8.99
Liqui Moly valve clean protects against corrosion in your vehicle's fuel system. A combination of active agents, specifically developed to clean the intake valves and the combustion chamber of port injected engines, do the dirty work for you. Suitable for use in all 4-stroke gasoline engines—with or without turbochargers—Liqui Moly valve clean provides safe interaction with catalytic converters and particulate filters (GPF).
( 1 )
$7.99
Liqui Moly Anti-Seize Compound is a release agent specifically designed for high-temperature applications on threaded connections and parting surfaces which are exposed to high temperatures, high pressures, and corrosive effects in turbines, compressor equipment, exhaust systems, spark plug threads, etc. Features: * Operating temperature range: -31 degrees F to +2012 degrees F (-35 degrees C to +1100 degrees C) * Outstandingly adherent and thermal resistance * Long-term corrosion protection * Resistant to hot water, salt water, and splash water * Resistant to acceleration forces * Protects from welding and seizing * Universal application * Prevents brake noise * Vibration damping effect * Lubricant and release effect
Not Yet Reviewed
$8.99
Liqui Moly super diesel additive prevents corrosion and increases lubrication, thereby reducing fuel pump and injector wear. A combination of additives to clean and maintain the diesel fuel system does the dirty work for you. It will also increase Cetane value for improved engine performance, easier starting, and lower emissions. Regular use of this product helps keep your vehicle's fuel system in perfect working order. Suitable for use in all diesel engines—with or without turbochargers—Liqui Moly super diesel additive provides safe interaction with catalytic converters and particulate filters (DPF).
Not Yet Reviewed
$8.99
Liqui Moly offers this special purpose brake caliper slide and pivot point lubricant for use during assembly and repair of brake calipers. It provides proper slide pin and pivot point movement for equalized brake pad wear and accurate function. The produce reduces brake noise thanks to vibration damping properties. Compatible with most rubber and plastics, this lube prevents dirt, debris and water intrusion for maximum corrosion protection and service life. It corresponds to OEM requirements for caliper pin greases. Use to lubricate brake caliper slides, pivot points and caliper O-rings. Minute amounts in contact will not affect DOT 3, DOT 4 (LV/SL6) and 5.1 brake fluids. Clean and dry the area to be treated, then apply with a brush, clean cloth or sponge. Remove excess.
Not Yet Reviewed
$9.99
Liqui Moly Long-Life Grease with MoS2 has a wide application range in all motor vehicles and for general machine lubrication. Thanks to added MoS2, this high performance grease offers outstanding protection during extreme loads and high heat, and it also adds limp-home properties. Liqui Moly Long-Life Grease with MoS2 is ideal for heavily loaded bearings and joints, splined shafts, threads, and guides, as well as for constant velocity drive joints. Features, benefits, and specs: * Distinctive high-pressure characteristics * Increases operational reliability * Good corrosion protection * Especially resistant to cold and hot water * Outstanding lubricating action * Certification: acc DIN 51502 KPF 2K-30 * Operating temperature range: -86 degrees F to +248 degrees F (-65 degrees C to +120 degrees C), up to +266 degrees F (+130 degrees C) briefly
( 1 )
$6.99
Liqui Moly GUNTEC Gun Oil is a very cohesive, mid-viscosity specialty oil for lubrication and preservation of guns, gun parts, and metal components. It has superior lubrication properties that maximize corrosion protection and provides exceptional wear protection of all moving parts, while its superb penetrating properties and resistance to thickening makes it ideal and usable when lubricating various precision mechanisms. Liqui Moly GUNTEC Gun Oil offers universal use on polymers and metals, as well as treating and protecting wood rifle stocks. Benefits: * Extremely easy to use * Long-term corrosion protection * Does not contain acids * Does not resinify or become sticky * Outstanding oil film strength * Excellent long-term lubricating effect * Ensures hydrophobic (strongly water-repellent) surfaces * Outstanding dissolving properties for powder and smoke residues * Compatible with most commercially available plastics * Does not attack burnished parts * Broad application area * Strong adhesion and yet easy to remove
( 1 )
$9.99
Brake Fluid DOT 4 by Liqui Moly is a synthetic formulation based on glycol ethers, alkyl polyglycols and glycol ether esters. It also provides a higher wet and dry boiling point which guarantees full function even during extreme conditions, plus unique inhibitors provide corrosion and oxidation protection at high temperatures. Additionally, Liqui Moly brake fluid DOT 4 contains special scavengers that suppress steam at increased moisture levels.
Not Yet Reviewed
$4.99
Liqui Moly Electronic Spray is a fully synthetic, silicone-free contact spray, formulated for use on vehicle electronic and general electrical systems. It reduces fretting and corrosion and suppresses moisture. It is neutral to paints, common plastics and rubber and cleans and protects electrical connectors. Liqui Moly Electronic Spray penetrates layers of oxides and sulfides. Spray components before installing them. If the contacts are heavily corroded, allow the product to act for longer and rub off corrosion residues with a cloth or brush—after spraying, allow a flash-off period of 10 min. before connecting the component to a power supply. Features and benefits: * For cleaning contaminated contacts, reduce corrosion protection and moisture removal on wire terminals, fuse holders, ignition distributors, circuit breakers, terminals, generator hook-ups, starters, etc. * Electronic Spray contains no silicones or mineral, animal or vegetable based oils * Drives out moisture and reduces contact resistance * Good water separation and corrosion protection—reduces chance of fretting corrosion on Tin plated terminals * Penetrates layers of oxides and sulfides
Not Yet Reviewed
$9.99
Liqui Moly battery clamp grease prevents contact resistance from increasing during operation and ensures lower loss than with untreated contacts. Especially for battery terminals and connections, along with plug connectors in vehicle electronics, it protects them from corrosion and oxidation. Liqui Moly battery clamp grease is compatible with most plastics, ensures safe starting, bright light, and longer battery life.
Not Yet Reviewed
$4.99
Liqui Moly Special Tec AA engine oil is a fully synthetic low viscosity premium class motor oil developed to meet the high demands of modern Asian and American gasoline engines. The innovative additive technology guarantees best wear protection and engine cleanliness, lowest oil and fuel consumption, and highest engine efficiency. Liqui Moly Special Tec AA engine oil is ideally suited for engines with direct injection (GDI) and turbochargers. Key features: * Outstanding engine cleanliness * Excellent wear resistance * Excellent low temperature behavior * High lubrication reliability * Long engine service life * Smooth engine running * Miscible with all commercially available motor oils * Optimum stability to aging * Optimum oil pressure under all operating conditions * Reduces pollutant emissions * Instant lubrication after cold start * Reduces fuel consumption * Ideal with turbochargers and catalytic converters
Not Yet Reviewed
$5.50
—
$9.99
Clearance
Liqui Moly Marine 2T DFI motor oil is a semi-synthetic high-performance 2-stroke lubricant developed with state-of-the-art agents specifically for use with late generation, high-stress direct fuel injection marine engines. It ensures optimum lubrication and prevents deposit build-up even at high operating temperatures to allow maximum engine life and lowest emission values. Available in multiple sizes. Properties: * Excellent corrosion protection * Outstanding engine cleanliness * Optimum lubrication under all operating conditions * For separate and mixture lubrication * Approvals: NMMA TC-W3 * Liqui Moly also recommends this product for vehicles or assemblies for which the following specifications or original part numbers are required: Evinrude E-Tec Engines, ISO L-EGC, ISO L-EGD, JASO FC, JASO FD, Mercury DFI 2 stroke engines * Areas of application: For 2-stroke direct fuel injection gasoline engines. Ideal for use with Evinrude E-Tec and Mercury DFI 2-stroke engines. Suitable for mixing ratios of 1:30, 1:50 or 1:100. Safe with catalytic converters and turbochargers. Safe with catalytic converters and turbochargers.
Not Yet Reviewed
$16.99
$8.50
Liqui Moly Medium Strength Threadlocker is an optimum thread-locking product for use on threads up to 3/4 in. and most fastener materials. It may even be applied to oily surfaces. This compound prevents threaded fasteners from loosening due to shock or vibration. Use on fasteners in various applications: automotive, industrial, farming, home etc. Before use, confirm compatibility with fastener material. Apply uniformly onto threads. The product cures when confined in the absence of air between close fitting surfaces. Rate of cure will depend on material. Active materials such as iron, steel, copper, brass, bronze etc. will reduce cure time; while passive materials such as high-alloy (stainless) steel, zinc, aluminum or plastics increases cure time. Product features and details: * Resistant to stresses and vibrations * Can be used on oily surfaces * Cures extremely fast * Wide operating temperature range * Prevents leaks * Controlled torque/stress ratio
Not Yet Reviewed
$8.99
Liqui Moly High Strength Threadlocker is an optimum thread-locking product for use on threads up to 3/4 in. and most fastener materials. It may even be applied to oily surfaces. This compound prevents threaded fasteners from loosening due to shock or vibration. Use on fasteners in various applications: automotive, industrial, Farming, home etc. Before use, confirm compatibility with fastener material. Apply uniformly onto threads. The product cures when confined in the absence of air between close fitting surfaces. Rate of cure will depend on material. Active materials such as iron, steel, copper, brass, bronze etc. will reduce cure time; while passive materials such as high-alloy (stainless) steel, zinc, aluminum or plastics increases cure time. Product feature and details: * Resistant to stresses and vibrations * Can be used on oily surfaces * Wide operating temperature range * Rapid curing * Prevents leaks * Controlled torque/stress ratio
Not Yet Reviewed
$8.99
Liqui Moly Marine 4T Motor Oil is high performance blend formulated with specific synthetic marine additives. It provides a stable lubricating film and best wear protection in the most extreme conditions. The oil maintains engine rubber seals for lowest possible oil consumption. This product is designed for 4-stroke gasoline engines, where an oil according to current product specifications is required or recommended. It is safe with catalytic converters and turbochargers. (Observe the manufacturer's instructions!) Marine 4T Motor Oil is available in a variety of weights, API approvals, and volume options. * Outstanding corrosion protection * Ideal with catalytic converters * Optimum oil pressure under all operating conditions * Stable to aging and stable viscosity * Outstanding oil film strength
Not Yet Reviewed
$8.99
—
$9.99
Liqui Moly Marine Gasoline Stabilizer Shooter provides long-term protection against fuel aging and oxidation. It safeguards your fuel system from corrosion and prevents problems during lengthy storage. When added to gasoline it uses organic content to stabilize the fuel. This product is suitable for all 2- stroke and 4-stroke engines—and is safe for use with catalytic converters. A 200 ml bottle is sufficient for 50–70 liters (13 to 18 gallons) of fuel. * Simple to use * Has a lasting effect * Protects fuel against oxidation and aging * Cost-effective due to exact dosage
Not Yet Reviewed
$7.99
Liqui Moly Truck Series DPF Protector reduces formation of soot during combustion in the engine. It will improve engine performance and emissions control, and reduce clogging of the DPF caused by soot as a combustion product. Liqui Moly Truck Series DPF Protector is suitable for use in all diesel engines, with or without turbochargers, and is safe for use with catalytic converters and particulate filters (DPF).
Not Yet Reviewed
$9.99
Clearance
Liqui Moly Marine Winch Grease is a synthetic high performance grease enhanced with PTFE solid lubricants, and is specifically developed for use on winches and hoists. The solid lubricant provides the ultimate in wear protection and friction reduction, and is resistant to seawater and freshwater, along with having excellent adhesive properties. Liqui Moly Marine Winch Grease does not contain resins or acids, does not affect non-ferrous metals or plastics, and has a Certification DIN KHCF1N-35.
Not Yet Reviewed
$16.99
$6.50
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
