Availability
Seal up your engine while looking good with one of these ICT Billet LS lifter valley covers. They are designed to fit (Non-DoD) engines and are milled from a solid block of aerospace-quality billet aluminum. The covers offer outstanding block rigidity, while the precision-machined underside provides an excellent seal using the existing factory O-ring. Their wide chamfered edges ensure adequate intake manifold runner clearance and they include the necessary flush mount, Allen head stainless steel mounting hardware.
( 71 )
$49.99
Get connected with ICT Billet throttle body adapters. These adapter plates are offered for several different applications and are all made from aerospace-grade billet aluminum. Adapter plates are available in a variety of straight and tapered through-hole diameters.
( 30 )
$34.99
—
$51.99
Whether you are replacing a rusted crossover pipe or doing a head swap, ICT Billet coolant crossover kits help increase the flow of coolant through the engine block, reducing engine temperature. They are made from aerospace-grade billet aluminum with a natural finish. By increasing the flow of coolant in the block, thereby reducing engine temperature, you can eliminate hot cylinders and detonation.
( 30 )
$43.99
—
$52.99
ICT Billet turbo oil feed lines feature a PTFE core with a braided stainless steel outer jacket. They include pre-installed -4 AN hose ends: one 90 degree female and one straight female. They are available in different lengths to help you with your project, from start to finish.
( 10 )
$54.99
Affix your intake manifold with ICT Billet bolt kits. These strong steel fasteners hold your manifold in place securely, so it may perform to your expectations. Secure your intake manifold for leak-free performance with a set of ICT Billet bolts.
( 23 )
$21.99
—
$29.99
ICT Billet fuel injector bungs are ideal for your custom intake manifold fuel rail. These special LS1 bungs allow you to use taller intake and fuel rails with shorter length injectors. Of course, these weld-in bungs are manufactured from 6061-T6 billet aluminum for lasting performance.
( 1 )
$49.99
ICT Billet offers direct injection fuel pump lifter delete plugs for a variety of applications. When removing direct injection, the high-pressure fuel pump lifter must be removed—exposing an oil port in the lifter bore. These delete plugs will seal the lifter bore to prevent low oil pressure. They are compatible with all Gen V, LT Series engines. The kits include aerospace-grade billet aluminum plug, O-rings, mounting bracket, and bolt.
Not Yet Reviewed
$43.99
ICT Billet LS throttle body flanges assist you with your custom fabrications. When creating your own intake manifold these throttle body intake weld flanges come in handy. They are made from aerospace-grade 6061 T-6 billet aluminum.
Not Yet Reviewed
$34.99
ICT Billet LS valley pan cover flange bolts are full sets of valley cover to engine block bolts for LS Series engines. These custom-made bolts are Grade 10.9 clear zinc coated steel with JIS-style heads. ICT M8s have a torque specification of 18 lbs.-ft. Finish off your LS valley pan cover installation with flange bolts from ICT Billet.
Not Yet Reviewed
$25.99
ICT Billet supercharger manifold fasteners are designed to mount your supercharger case assembly to the intake manifold. They're available in a variety of styles, materials, and finishes based on your specific supercharger model. Order the set recommended for your application.
Not Yet Reviewed
$29.99
If you're looking to delete your OE mechanical fuel pump, it's necessary to cover up the stock fuel pump mount and bolt holes. ICT Billet fuel pump block-off plates are made from aerospace-grade billet aluminum. They look good and provide an excellent seal.
( 2 )
$22.99
—
$36.99
ICT Billet throttle body bolts are the same quality bolts as supplied by the OEM. Each set of bolts are designed specifically for your application. To make sure your new throttle body is sealed properly, always use a new set of ICT Billet throttle body bolts.
( 1 )
$25.99
ICT Billet LS mass airflow sensor plugs are built from the highest quality 6061 T-6 billet aluminum. The plugs are designed for use with engine RPO codes LS3, LS7, LS9, LSA, LV1, LV3, LT1, LT4, L83 and L86. They include the necessary bolts and O-rings for proper installation and seal.
( 1 )
$29.99
ICT Billet throttle body spacers are designed to give you the clearance you need when swapping throttle bodies on your LS engine. Made from billet aluminum with a natural finish, these spacers include the hardware needed for a proper installation.
( 3 )
$43.99
ICT Billet fuel pressure regulator mounts are precision-cut from billet aluminum and beautifully polished to look great in your engine bay. Keep your regulator close and the pressure in your fuel system optimized when using a billet mount from ICT.
Not Yet Reviewed
$43.99
ICT Billet fuel rail spacer kits are needed for those upgrading LS truck intake manifolds to taller fuel injectors. You insert the spacers between the manifold and fuel rails, and then bolt them down securely to the OE fuel rail hold-down threads with the included longer bolts. These kits provide the extra space needed for longer injectors including Siemens Deka fuel injectors.
( 2 )
$29.99
ICT Billet bottle brackets mount your nitrous in style. They are crafted from aerospace-grade billet aluminum. They are offered in a choice of sizes and sport a great-looking natural finish.
Not Yet Reviewed
$52.99
Sealed, crimped, and assembled, ICT Billet starter solenoid adapters are made with OEM-grade TXL wire and individually hand-tested to ensure they exceed OEM standards. They adapt LS/LT wire harnesses to ring connector-style starter solenoids.
Not Yet Reviewed
$29.99
ICT Billet offers fuel pressure regulator bypass plugs for a variety of applications. They install in place of the factory integrated regulator that is mounted to the fuel rail on truck intake manifolds. These plugs are required when using an external fuel pressure regulator. Machined from aerospace-grade billet aluminum, the plugs are compatible with LS Gen 3 truck/SUV round fuel rails. They include an O-ring and re-use the factory retainer clip. Order the model designed for your vehicle.
( 1 )
$36.99
ICT Billet air intake resonator delete kits are high-quality plugs or plates designed to fit your engine. They are manufactured from aerospace-grade billet aluminum and include all necessary hardware for installation.
( 2 )
$22.99
ICT Billet throttle body adapter plates are made from aerospace-grade billet aluminum. They allow you to connect throttle body to intake or other components when mounting patterns, orientations, sizes, etc. don't match. Select the ICT throttle body adapter needed for your application.
Not Yet Reviewed
$34.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
