Availability
Street Master torque converters are designed for the driver who is looking for a competitive advantage. By raising the stall rpm, these converters will completely eliminate slow, sluggish starts. Recommended for stock to slightly modified engines for maximum performance, they'll allow the engine to idle smoothly when the car is in gear. All stall speeds are approximate ratings for fresh big block engines. Small blocks will vary 300 to 500 r.p.m. lower.
( 235 )
$355.50
—
$489.99
The most important factor in performance driving is how your car leaves the starting line. For this reason, all Hughes Performance Pro-Street 30 converters are brazed to increase strength and have a full needle bearing design to ensure reliability. Excellent for weekend racing and high performance street use, they also have a strengthened sprag for durability.
( 33 )
$437.99
Street Rod torque converters from Hughes Performance are designed and manufactured for street rod enthusiasts needing a bit of an upgrade over their OE stock converters. These converters feature silicon brazing for strength, needle bearings for reliability, and stator modifications for more torque multiplication. All stall speeds are approximate ratings for fresh big block engines. Small blocks will vary 300 to 500 rpm lower.
( 116 )
$382.99
—
$490.99
Made from cast aluminum, Hughes transmission pans hold anywhere from stock to four extra quarts of fluid, depending on the application. High-capacity cooling helps keep your transmission running at a lower temperature and increases its overall life expectancy. They also increase transmission case rigidity to allow for more torsional twist and feature raised cooling fins to help dissipate heat faster.
( 137 )
$269.99
—
$443.99
Hughes Performance Fuel Miser torque converters reduce the slippage in your transmission by 25 percent. The result is better fuel economy, more efficient shifts, and cooler transmission temperatures. They are designed to work with engines over 400 c.i.d. as well as with diesel applications. All stall speeds are approximate ratings for fresh big block engines. Small blocks will vary 300 to 500 rpm lower.
( 19 )
$301.50
—
$491.99
All Hughes Performance Pro Competition 45 Series converters have a full needle bearing replacement of fiber washers. Special silicon spot brazing on top and bottom adds strength and reliability. Hughes installs a premium-built sprag assembly and a specially machined stator in these converters, giving you the performance edge you need off the line.
( 3 )
$437.99
If you've got a daily driver that you race on the weekends, and are in need of an excellent torque converter, then look no further. Hughes street/strip 35 Series torque converters are perfect for weekend racing and high performance street use. These converters are brazed and feature a strengthened sprag, special cut stator, and full needle bearings on the front and rear. Whether you're cruisin' down the highway or flying down the track, these converters get the job done.
( 4 )
$437.99
Tow Master series torque converters from Hughes Performance are designed to increase bottom-end pulling power in your tow vehicle without sacrificing top-end efficiency or lockup. Because they offer your vehicle more power with less effort, mileage can be increased by as much as 1-2 miles per gallon. Recommended for slightly modified engines, these Tow Master converters help you get the job done. All stall speeds are approximate ratings for fresh big block engines. Small blocks will vary 300 to 500 rpm lower.
( 25 )
$443.99
—
$491.99
Hughes knows that the most important factor in performance driving is how your car leaves the starting line. These Competition 40 Series converters are exclusively designed for the serious racer. The replacement of the fiber thrust washers with heavy-duty needle bearing packages enables these converters to be run on the street, but they're recommended just for strip use. They'll get you the torque you need, when you need it, to get you off the line and on your way to the winner's circle.
( 3 )
$437.99
Hughes Performance full manual valve bodies from are a must for competition applications. They provide full manual control over all shifts and deliver them without delay or time-costly overlap. These valve bodies are used for events where a trans-brake is not needed, such as in tractor pull, monster truck, and other track applications. They're available in both standard shift and reverse-pattern manual valve bodies.
( 7 )
$291.99
—
$356.99
Install one of these Hughes hardened input shafts in your transmission and you can be confident that you won't have any twisting or breakage. For high-horsepower and trans-brake applications, Hughes hardened input shafts made from 4340 billet steel will exceed the need.
( 5 )
$265.99
—
$353.99
Hughes Performance XTM Heavy-Duty Towing Series torque converters take away the worry of the "long grade" with the "heavy load." These converters are designed with heavy-duty use in mind, with a heavy-duty one-piece hub and a balloon plate, a heavy-duty sprag, and silicon spot-welded fins in the turbine and cover, providing strength beyond compare. The combination of their stator and specific application fin applies maximum power to your wheels, giving you more available engine power. These XTM converters run 7 qt. of fluid more per minute than your OE or stock converter. Because of the increased cooler flow, the transmission and converter will operate cooler, increasing the life of the tranny and converter.
( 27 )
$493.99
Hughes Performance Circle Track torque converters are specifically designed for oval track racing. They feature a full bearing for greater durability and less drag, and low stall for maximum torque multiplication and top-end efficiency, as well as quicker exits while cornering. The converters also have silicon spot-brazed turbine and pump vanes.
Not Yet Reviewed
$388.99
—
$489.99
Hughes Performance HD replacement planetary sets consist of all gears housed in a stock carrier with a forged ring gear. They are recommended for use in Stock, Super Stock, and some bracket classes.
( 2 )
$252.99
—
$360.99
Hughes Performance automatic transmission conversion wiring harnesses adapt your electrical connections. When used with your GM-type fuel injection, these harnesses allow you to swap out your 4L60E for the 4L80E transmission. They match the electrical inputs/outputs that allow your GM PCM to properly operate the transmission. Make the conversion with Hughes Performance automatic transmission wiring harnesses.
Not Yet Reviewed
$382.99
Hughes Performance automatic transmission servos are billet aluminum assemblies providing the exceptional holding power you need when using a full race trans-brake. When you're looking for performance parts, Hughes has got you covered.
Not Yet Reviewed
$264.99
—
$281.99
To improve and extend the life of your engine and transmission, Hughes Performance oil coolers with fan kits are a must. All coolers are equipped with #6 fittings and mounting kits. Hughes oil coolers come with a built-on fan and a dual cooling system to ensure cool running transmission and engine oil. Hughes Performance oil coolers will keep your ride cool when things heat up!
( 1 )
$362.99
These SFI approved flexplates and flywheels are .035 in. thicker than OEM and withstand the demands of high horsepower and high RPM engines.
Not Yet Reviewed
$277.99
These double-welded Hughes heavy-duty flexplates are .035 in. thicker than OEM and, in most applications, will withstand the punishment and shock of today's high-horsepower and high-rpm engines. For street, strip, and off-road strength, Hughes Performance meets the needs.
( 20 )
$258.99
Hughes Performance Extreme series flexplates are a full 4mm thick and are designed to withstand the punishment and shock of high-horsepower, high-rpm engines! These high-strength steel flexplates will handle all Hughes high-stall converters for the ultimate performance setup!
Not Yet Reviewed
$256.99
When rebuilding your transmission, be sure to use the correct components. These automatic transmission direct drums from Hughes Performance are direct replacements for your original drums, so you can be assured of a correct fit.
Not Yet Reviewed
$467.99
Install one of these Hughes Performance intermediate shafts in your transmission and you can be confident that you won't have any twisting or breakage. They are manufactured from the highest quality materials for maximum reliability and performance under pressure.
Not Yet Reviewed
$484.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
