Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
Howards Cams Performance Hydraulic Lifters
Howards Cams performance hydraulic lifters are 100 percent Rockwell-tested. They are designed for maximum performance, while offering precision oil control. These lifters can be used as OE replacements, as well as in high performance racing applications.
( 28 )
$143.99
Howards Cams Direct Lube Extreme-Duty Mechanical Lifters
Today's cams have more aggressive lobes. That's why increasing the oil supply to these lobes is critical. Howards Cams uses a precision "E.D.M." laser to burn a .021 in. hole in the center of the face of their direct lube extreme-duty mechanical lifters. This allows for a constant oil supply to the cam lobe, resulting in higher valve spring pressures, more aggressive profiles, and reduced lobe wear.
( 29 )
$232.99
Howards Cams Double Roller Billet Steel Timing Sets
Howards Cams double roller billet steel timing sets are designed for accuracy and long life. Lightweight by design, these sets feature a billet steel cam sprocket with lightening holes, a heat-treated crank sprocket, and a black oxide coating. They also include large .250 in. diameter seamless roller chains.
( 66 )
$115.99
—
$159.99
Howards Cams Direct Lube Hydraulic Flat Tappet Lifters
Howards Cams direct lube hydraulic flat tappet lifters use a precision minor flat ground on the side of lifter body to supply oil to the cam lobe/lifter interface. This allows for a constant oil supply to the cam lobe, resulting in higher valve spring pressures, more aggressive profiles, and reduced lobe wear.
( 8 )
$215.99
Howards Cams Rattler Camshafts
Howards Cams Rattler camshafts build solid power and a classic sound while retaining drivability. They feature wider lobe centers and use a more aggressive ramp rate to help with air velocity. Although their design is for high-performance street use, they also work well with a stock torque converter. Howards Cams recommends using their Rattler camshafts with a converter stalling above 1,800 rpm and a set of steeper rear-end gears.
( 25 )
$199.99
Howards Cams Composite Distributor Gears
Make bronze distributor gear wear a thing of the past with these Howards Cams composite distributor gears! NASCAR-proven technology yields precise timing and extended durability. They are precision-manufactured from carbon ultra fiber material and offer 300 percent more durability than bronze distributor gears when used with steel camshafts. Howards Cams composite distributor gears can be used with cast or billet cams.
( 8 )
$142.99
—
$149.99
Howards Cams Reluctor Wheels
Eliminate failure due to the reluctor slipping on the crankshaft with Howards Cams reluctor wheels. They feature a one-piece billet steel design and are held to the highest tolerances. Upgrade your vehicle with a Howards reluctor wheel.
( 2 )
$119.99
Howards Cams Oval Track Lift Rule Hydraulic Flat Tappet Camshafts
Howards Cams oval track lift rule hydraulic flat tappet camshafts are designed to meet the requirements of oval track racing. These camshafts are offered in a variety of profiles, each specifically geared to track length and type. Manufactured using dedicated, high-precision cam grinding machines, each oval track lift rule hydraulic flat tappet camshaft is 100 percent Rockwell checked and Parkerized to ensure the highest quality standards are met. You can count on Howards Cams for the right cam for your oval track racing needs!
( 3 )
$232.99
—
$239.99
Howards Cams Big Daddy Rattler Camshafts
Howards Cams Big Daddy Rattler camshafts are street performance cams designed to give a nice aggressive-sounding idle without sacrificing throttle response and horsepower gains. Big Daddy camshafts are top dog in the Rattler lineup, and as such they offer a rough idle, and are best used in Pro Street or street/strip applications. Compression needs to be at least 9.5:1, the torque converter needs to stall 2,800 rpm or higher, and a performance intake manifold, steeper gears, and free-flowing exhaust are required to take advantage of the camshaft's capabilities.
Not Yet Reviewed
$199.99
Howards Cams Street Series Retrofit Hydraulic Roller Lifters
Howards Cams Street series retrofit hydraulic roller lifters are designed for street performance enthusiasts who want to upgrade to a hydraulic roller camshaft. They are manufactured to fit early or late model blocks, including blocks with tall lifter bosses. Howards Cams uses cold form technology to shape their bodies for durability. The lifters are then carbonitrided and tempered for hardness. They also feature hardened and tempered steel alloy roller wheels, heat-treated stainless steel cross bars, and high-alloy steel tie bar buttons. Howards Cams Street series retrofit hydraulic roller lifters are specifically designed for street applications up to 6,500 rpm.
( 91 )
$114.99
—
$121.99
Howards Cams Long Slot Rocker Arms
Manufactured from the highest quality steel alloy and heat-treated, Howards Cams long slot rocker arms make an excellent choice for stock engines or street performance. These rocker arm sets include anti-gall rocker balls and locking nuts. Serious parts for serious power performance, choose Howards Cams!
( 9 )
$109.99
—
$154.99
Howards Cams OE-Style Performance Hydraulic Roller Lifters
Howards Cams OE-style performance hydraulic roller lifters are stock replacements for use in factory hydraulic roller blocks. These lifters offer the best combination for the street with reduced friction and increased torque and horsepower. They're available in various outside diameters for fitment on specific vehicle applications. Order them individually or as a set.
( 7 )
$229.99
Howards Cams Performance Mechanical Lifters
Howards Cams performance mechanical lifters are designed and manufactured to the closest tolerances in the performance industry. Their precision-ground crown faces ensure long life for both cam and lifters in the harsh competition environment.
( 3 )
$218.99
—
$246.99
Howards Cams Street Force 3 Hydraulic Flat Tappet Camshafts
Howards Cams Street Force 3 hydraulic flat tappet camshafts are engineered for the street performance enthusiast, but also work well for mild bracket racing. The specially designed grinds were created to provide a noticeable idle and strong throttle response. This series of camshafts require the use of an improved intake manifold, 4-barrel carburetor, free-flow exhaust, and 2,200 to 2,500 stall rpm torque converter. Upgrading your ignition system and a utilizing a 3.20 to 3.90 gear ratio will provide additional performance. Street Force 3 camshafts also feature 112 degree lobe separations to help maintain vacuum. They're available for a variety of year/make and engine applications. When it comes to street performance, Howards Cams is the preferred choice.
( 4 )
$219.99
Howards Cams Extreme Billet Main Caps
Howards Cams extreme billet main caps are precision CNC-machined from superior-quality low-carbon 1020 billet material. They come available as stock replacements (straight bolt) or with splayed outer bolt holes. The splayed caps feature 10 degree angled outer holes to positively reinforce and tie the block together. Front, rear and center caps are all available. Use all the Howards Cams caps together for the ultimate in bottom-end stress and flex management. Howards Cams main caps feature side notches for easy removal and are proudly 100 percent manufactured in the USA. Line boring is required after installation.
( 14 )
$103.99
—
$235.99
Howards Cams Max Effort Hydraulic Lifters
Howards Cams Max Effort hydraulic lifters were specifically designed for higher revving applications. They are perfect for race applications which require a hydraulic lifter or high performance street applications that need an extra edge. These lifters can show a noticeable increase of power from 5,000 rpm and up.
( 8 )
$215.99
Howards Cams Hydraulic Flat Tappet Camshafts
Howards Cams offers their hydraulic flat tappet camshafts in a variety of configurations and performance levels for street, strip, and oval track purposes. All their flat tappet cams meet strict requirements to ensure the highest quality (and many get packaged and shipped in their unique, reusable, high-impact-plastic cases to ensure the quality reaches your doorstep.) Get the profile you want—from mild and smooth to loud and rough—with the hydraulic flat tappet camshafts from Howards Cams designed for your application.
( 42 )
$199.99
—
$219.99
Howards Cams American Muscle Mechanical Flat Tappet Camshafts
Howards Cams American Muscle mechanical flat tappet camshafts make great replacement options for your muscle car. Howards offers the highest-grade of race-quality cores and grinds them in-house on dedicated high-precision cam grinding machines. All their flat tappet cams meet strict requirements to ensure the highest quality and many get packaged and shipped in their unique, reusable, high-impact-plastic cases to ensure the quality reaches your doorstep. Put some brawn in your muscle car with the American Muscle mechanical flat tappet camshafts from Howards Cams designed for your application.
( 1 )
$249.99
Howards Cams Rev Kits
Howards Cams rev kits are designed for roller cam applications to increase valvetrain stability throughout the rpm range. In addition to increasing rpm capabilities, these rev kits will also keep the lifter in the lifter bore in the event of valvetrain failure. The locator bars and lifter buttons are made of the highest quality aluminum and are then anodized for protection. Each of these kits comes complete with locator bars, springs, and lifter buttons.
( 6 )
$162.99
—
$164.99
Howards Cams Track Smart Nitro-Carbided Rocker Arms
Howards Cams Track Smart nitro-carbided rocker arms offer 3-5 times greater resistance to wear, fatigue, and fracture in high-stress areas. These steel, long slot-style engine components are available for a wide range of vehicle applications. Order the recommended stud size and rocker arm ratio replacements.
Not Yet Reviewed
$179.99
Howards Cams Maximum Effort Retrofit Hydraulic Roller Lifters
Howards Cams Maximum Effort retrofit hydraulic roller lifters are true high performance street lifters designed primarily for ease of maintenance and reliability. The lifters are CNC-machined and then fitted with precision check ball internal valving to prevent lifter "pump up." These features combine to provide a broader power band and increased rpm potential, while still offering the low maintenance of a hydraulic cam.
( 27 )
$114.99
Howards Cams Race Series Vertical Bar Hydraulic Roller Lifters
Howards Cams race series vertical bar hydraulic roller lifters offer proprietary hydraulic valving specifically designed for continuous operation to 6,600 rpm with ideal seat pressures between 150-160 lbs. The lifter bodies are fully machined from alloy steel bar stock and are completely micro-polished. The nose wheels are machined from 8620 material and the cases are hardened for durability. Howards Cams race series vertical bar hydraulic roller lifters are fully rebuildable.
( 6 )
$142.99
—
$149.99
Howards Cams Mechanical Flat Tappet Camshafts
Do you need aggressive quality? Howards Cams mechanical flat tappet camshafts are 100 percent Rockwell-checked and Parkerized to ensure the highest quality control standards! They use only the highest-grade, race-quality cores available and are ground on dedicated, high-precision machines at Howards Cams--not reboxed! Capable of high-engine rpm, these camshafts are a good choice for everything from moderate street performance to serious racing. Do you have lots of rpm? Go aggressive with a winner--Howards Cams mechanical flat tappet camshafts!
( 19 )
$236.99
—
$242.99
Howards Cams RaceMax Vertical Bar Mechanical Roller Lifters
You can rely on Howards Cams RaceMax lifters. These vertical bar mechanical roller lifters feature heat-treated 8620 steel billet bodies that are CNC-machined in one process to assure accuracy of all part features. RaceMax lifters are precision ground for proper fit in OE and +.300 in. tall aftermarket lifter bores. They're outfitted with an increased oil ban diameter for maximum rigidity, as well as heat-treated tool steel nitrided axles, and precision fitted roller bearings. The pressure-fed axle oiling insures longevity and best defense against premature failure. Trust your race car performance to Howards Cams RaceMax vertical bar mechanical roller lifters.
( 4 )
$120.99
