Availability
On Sale
Developed with performance in mind, Holley EFI LS single plane split-design race intake manifolds feature a race bred, 2-piece split design that was previously found only on the most expensive race intakes. These manifolds will fit GM LS Gen III engines with cathedral port heads for high performance/racing engine applications with 5.3 to 6.2 liter displacement and maximum engine speeds of 6,000 to 7,000 rpm, depending on the engine combination. The single-plane design provides optimal performance across the rpm spectrum, while the split feature, which allows disassembly of the intake for direct access to internal plenum and port surfaces, makes custom porting and matching a snap. Shoulder bolt locators and an O-ring seal makes reassembly simple and precise.
( 4 )
$821.95
$628.95
—
$738.95
On Sale
Holley Sniper EFI fabricated Race Series intake manifolds utilize a larger intake plenum for max effort engines and boosted applications. These manifolds feature 5mm (13/64 in.) thick T-6061 sheet aluminum construction with 100 percent TIG welds. With their removable tapered top, increased velocity and more evenly distributed airflow to all cylinders is a guarantee! Race Series intakes also include 3/8 in. fuel rail kits, -8 AN fittings, and crossover-braided line capable of supporting 750+ hp. They're available in multiple anodized colors, and every manifold has the Holley Sniper EFI logo.
( 1 )
$1,449.95
$797.95
On Sale
Holley GM LT retrofit oil pans provide maximum clearance to the chassis and ground; plus, they provide OEM fitment for durability and proper sealing. GM's Gen V LT direct-injected engines are finding their way into a large variety of vehicles. They make great power, they're durable, and reliable, but unfortunately, the factory oil pans don't always fit--or they hang too low for today's hot rods. Holley LT retrofit oil pans are designed to help! Features include: * Cast and machined aluminum * Allow for up to 4.00 in. crankshaft stroke * Can be used anywhere a GM F-body oil pan can be used * Provide OEM fitment--oil filter mounting, OEM engine NVH suppression, OEM flange sealing, proper structural rigidity, and OEM bellhousing attachments * Traditional high-quality cast aluminum appearance with clean exterior styling * Provide maximum clearance for vehicles where the steering linkage is behind the engine crossmember * Oil cooler port provision * 1/2 in. NPT port--ideal for turbo oil return or PCV oil return * Drag race version includes special hinged door baffles and pickup
( 33 )
$599.95
$538.95
On Sale
Getting a high-powered drag car to hook is the key to low elapsed times and win lights. Whether a small tire radial car or a full out Pro-Mod, all racecars will benefit from Holley's Time-Based Traction Management feature. Designed for Terminator X V3 Build 110 and later, the Time-Based Traction Management is intended for drag racing, standing mile events, or other racing that starts from a stop. Traction management is based on the time from launch vs. engine and driveshaft speed (one or both can be used). The tuner enters several curves that will retard ignition timing and can also enable rev limiting based on the departure of wheel or engine speed from the base curve. Each Holley EFI Terminator X Active Speed management software purchase allows activation of the traction management features for a single ECU. Once purchased, instructions will be emailed to the purchaser on how to access the feature. Please note that it may take up to an hour for the email to arrive after the order has been placed. Features: * Active Speed Management--traction control based on engine speed and/or driveshaft speed * Import Racepak driveshaft curve and rpm data directly into your ECU * Import crankshaft or driveshaft curves from previous pass, curve will automatically populate on the graph * Requires driveline speed sensor, be it wheel or driveshaft speed
Not Yet Reviewed
$574.95
$516.95
On Sale
Does your donor engine have a questionable water pump? Or, did you just discover after starting an engine swap that the accessories are interfering with things? Changing the belt alignment can help and, thankfully, Holley mechanical water pumps can get you there with ease. These pumps will fit a variety of applications and belt alignments—including the most popular and cost-effective truck engines. They're a budget-friendly option that will fit nicely under the hood. The water pumps even work with most truck accessories without changing out your entire accessory drive system to match their belt alignment. Holley Performance just keeps making swaps easier and easier! Order your OE replacement model, or the design and configuration that best suits your engine.
( 12 )
$624.95
On Sale
Holley aluminum Street HP carburetors make tire-smoking performance affordable! They utilize the best features from Holley's Race Bred models but are tamed for street and light competition use, weighing up to 40 percent less and are even easier on your wallet. Each Street HP carburetor features an aluminum contoured main body design with a tumble polished shiny finish and screw-in air bleeds for precision tuning capabilities. The metering system includes a timed spark port for a vacuum advance distributor and is calibrated for a hot street/strip engine setup for outstanding throttle response, drivability, and maximum performance. A street HP base plate is used so there is plenty of vacuum ports for power brakes, PCV, etc.
( 53 )
$799.95
—
$849.95
$718.95
—
$763.95
On Sale
Holley 4150 Double Pumper carburetors are a perfect upgrade for hot street cars and race vehicles—they're an American icon when it comes to performance. From their roots as the premier carb on many factory muscle cars, to powering thousands of vehicles across the finish line, the Double Pumper is a great choice—whether you're burning up the street or the quarter-mile. The Double Pumper is designed for use on lightweight vehicles with a manual transmission—or an automatic transmission with a high stall and low rear-end gears. These carburetors are available in a gold dichromate or tumble polished shiny finish, along with these features: Dual accelerator pumps for additional fuel under initial acceleration; mechanical secondaries for great performance; dual feed fuel inlets for constant high-volume fuel delivery; and a manual choke for easy control of engine warm up. Order the model with options to suit your application.
( 133 )
$699.95
—
$799.95
$628.95
—
$718.95
On Sale
Holley Coil-Near-Plug smart ignition coils are designed for use with Holley HP and Dominator ECUs, as well other EFI systems that can drive "smart" ignition coils. Although they are engineered for high-powered race applications, they can be used on street-driven vehicles, as well. They are available individually (includes mating connector and pins) or in kits that include everything you need to upgrade your ignition. Additional tech specs: * Peak voltage: 44,000 V * Peak output: 102 Mj * Maximum battery voltage: 17.0 V * Kits include coils, sub-harnesses, connectors, wires, and a wiring loom Note: Upgrading a non-coil-near-plug main harness requires HLY-558-307 Holley universal coil-on-plug harness, sold separately, to complete the installation.
( 10 )
$699.95
—
$749.95
$628.95
—
$673.95
On Sale
Holley Aluminum Street HP carburetors deliver weight savings, lasting good looks, and affordable tire-smoking performance! Utilizing the best features of their race-bred HP and the Double Pumper, Holley offers these amazing street/strip carburetors that weigh 40 percent less—and take less out of your wallet! Street HP carburetors display an aluminum contoured main body design with a tumble-polished, shiny finish, plus screw-in air bleeds for precision tuning capabilities. The metering system includes a timed spark port for a vacuum advance distributor, calibrated for a hot street/strip engine setup with outstanding throttle response, drivability, and maximum performance. Finally, they are 100 percent wet-flow tested to ensure that they arrive ready-to-run. More Holley Aluminum Street HP carburetor features: * Contoured Venturi inlet offers balanced airflow for increased horsepower * Four-corner idle for precise idle control * Mechanical secondaries for impressive tire-turning performance * Dual accelerator pumps for additional fuel under initial acceleration * Dual feed fuel inlets for constant, high-volume fuel delivery * Available in 650, 750, 850, and 950 cfm versions * Street HP base plate is used, so there are plenty of vacuum ports for power brakes, PCV, etc. * Intended for lightweight vehicles with manual transmission or automatics with a high stall and low gearing
( 38 )
$749.95
—
$799.95
$673.95
—
$718.95
On Sale
The all new Aluminum Street HP's weigh up to 40% less and are even easier on your wallet. Holley is proud to introduce the all new Aluminum Street HP™. They utilize the best features from Holley's Race Bred 4150 HP™ carbs, but are tamed for street and light competition use. The Street HP features an aluminum contoured main body design taken from the race winning 4150 HP™ and has a tumble polished shiny finish and screw in air bleeds for precision tuning capabilities. The metering system includes a timed spark port for a vacuum advance distributor and is calibrated for a hot street/strip engine setup for outstanding throttle response, drivability and maximum performance. A street HP base plate is used so there are plenty of vacuum ports for power brakes, PCV, etc. The Aluminum Street HP takes all the great features from the race bred HP and the Double Pumper and combines them into the perfect street/strip carburetor.
( 37 )
$799.95
$718.95
On Sale
Replace your old carburetor with original Holley performance 4160 carburetors. Budget-minded enthusiasts, like you, will be rewarded with maximum performance from your stock or mildly-modified engine. These Holley 4160 carburetors are easier to tune than full race carburetors with temperamental secondary metering blocks and dual pumps. Plus, they're available in your choice of universal or direct-fit OE replacement versions with all emission provisions. Bolt-on installation and improved performance; no wonder when car guys think of carburetors, they think of Holley 4160 carburetors!
( 260 )
$599.95
—
$728.95
On Sale
Push your racing performance to the next level with Holley Track Warrior carburetors. The aluminum contoured main body design weighs less while adding horsepower and torque. These carbs have screw-in air bleeds for precision tuning capabilities, billet metering blocks, a billet base plate, adjustable secondary linkage, and knurled (hand-adjustable) curb idle screws. Features of Holley Track Warrior carbs include: * Aluminum construction for weight savings and long-lasting good looks * Color options include purple or black * Optimized race calibrations for outstanding throttle response * Contoured Venturi inlet offers balanced airflow for increased horsepower * Four-corner idle for precise idle control * Mechanical secondaries for remarkable tire-turning performance * Billet metering blocks for improved durability (compared to cast blocks) * True gasket sealing and fully adjustable (emulsion bleeds, power valve channel restrictor, and idle feed restrictors.) * Available in 650, 750, and 850 cfm versions * For lightweight vehicles with manual transmissions or automatics with a high stall and low gearing * 100 percent wet-flow tested by Holley technicians to ensure on-arrival performance
( 31 )
$821.95
—
$849.95
$738.95
—
$763.95
On Sale
With performance engines pushing redlines up higher and higher, alternators are being forced beyond their design. Holley's premium alternators can tolerate 30 percent higher rpms than conventional models. The attention to cosmetic detail on these units is above and beyond what you would expect, too. The entire outside housing has been sculpted for a smooth silhouette that hides the ugly details we typically think of as alternators. If you drag race, autocross, or just hot rod your ride, be assured that Holley premium alternators won't fly apart on you. Features: * Available in natural, black, and polished finishes * Works with all Holley accessory brackets, as well as 4th generation F-body, most 1998 thru 2004 GM trucks, and many other applications * 150 amp output * Smaller and lighter than Holley high-amp alternators * Housings are smoothed to make polishing clean (no buffer cut marks trying to get in tight corners) * Rear cover is aluminum instead of typical black plastic * Ideal when size and clearance matter * Black and polished pulley covers are available on models that don't already include them * Designed for use with Holley alternator weatherproof pigtails (not included)
( 1 )
$514.95
—
$649.95
On Sale
Holley fuel cell EFI pump module assemblies are the easy way to upgrade your racing fuel system! And even though the name includes EFI, the modules can also be used as an upgrade for carbureted systems, with the proper regulator. Designed as drop-in direct replacements for your existing 6 or 12-bolt flange fuel cell cap assembly, the billet top flange includes an 8 AN inlet port, a 10 AN outlet port, and a fuel filler cap. They offer a fully adjustable fuel pump depth from 7.5 in. to 12 in. deep, and the modules are available in single or dual 255 lph and 450 lph fuel pump configurations. Holley fuel cell EFI pump module assemblies include all the hardware to install into your existing fuel cell—all you need to add is your fuel line. Order the model that best suits your application.
( 6 )
$828.95
$583.95
—
$745.95
On Sale
Holley's EFI crank trigger kits provide accurate crank speed and position signals to Holley EFI systems in the most demanding, high-horsepower, racing applications. The crank position is measured every 10 degrees instead of every 45 degrees, like standard 4-magnet crank trigger systems. Holley's EFI crank trigger kits feature 1/4 in. thick, billet steel, 36-1 or 60-2 tooth-crank trigger wheels with black zinc oxide finish for superior corrosion resistance and striking good looks Other notable features include: * Crank wheels center off of balancer hubs, eliminating the need for centering rings * All billet, 6061-T6 aluminum sensor mounting brackets with "bright-dipped" black anodized finish and laser-etched Holley EFI logo * Custom 3-wire, ferrous-target, Hall-effect sensors with M12 x 1.0mm threads for finer gap adjustment * Grade 8 and mil-spec mounting hardware
( 6 )
$675.95
$583.95
—
$749.95
On Sale
Holley LS split design carbureted intake manifolds are single-plane racing units designed with performance in mind. They feature a race-bred, 2-piece split feature that was previously only found on the most expensive race intakes. The manifolds will fit GM LS Gen III engines with cathedral port heads—and are intended for 4150-style square bore flanged carburetors or throttle body EFI. The LS Race single-plane intake manifold was designed for high performance/racing engine applications, 5.3 to 6.2+ liter displacement—and maximum engine speeds of 6,000 to 7,000 rpm, depending on the engine combination. This single-plane design provides optimal performance across the rpm spectrum, while providing maximum performance up to 7,000 rpm. Features include: * Maximum performance race design with hood clearance consideration * Lighter than other split race intakes * Split feature allows disassembly of the intake for direct access to internal plenum and port surfaces, making custom porting and matching a snap * Shoulder bolt locators and O-ring seal make reassembly simple and precise * 33 to 50 percent the price of other split race intakes * Vacuum port options: Two 1/8 in., one 1/4 in., and one 3/8 in. NPT ports at the carb flange
( 6 )
$725.95
$583.95
—
$749.95
On Sale
Holley LS throttle bodies are unquestionably the biggest bore and most feature-loaded option available. Holley went back to the drawing board and built the ultimate air valve for your LS engine. They are available with huge 105mm or 95mm bores--and low rpm, drive-friendly tapers. The 105mm version is designed for drag race applications when wide-open throttle is all that matters. Features like idle bleed adjustment, TPS clocker, and PCV passage defeat valve units, making them the ultimate throttle bodies for ease of installation and tuning. Regardless of whether you have a turbo, supercharger, or a big cam engine sucking gulps of air, Holley LS throttle bodies are manufactured from high-grade billet aluminum, and black anodized to give them a modern tech look, they're maximized for your application.
( 11 )
$826.95
$743.95
On Sale
Holley 2300 model carburetors are perfect for racing classes where 2-barrel carburetors are required, or for hot rodders looking for something different. These units have many performance features—including a manual choke, center hung float bowl, universal throttle lever, all-metal parts, replaceable jets, a power valve, and high-flow venturi. Holley 2300 carburetors are available in universal and vehicle-specific applications.
( 99 )
$649.95
On Sale
Holley EFI Smart Coils are a bolt-in ignition upgrade for your late model HEMI or Coyote engine. Here's the difference over a stock coil: they produce more spark energy while consuming less power without sacrificing voltage output. This means you get hotter spark at the plug to burn the maximum amount of fuel in each cylinder while using less power from your electrical system. Smart Coils are available individually or in sets of 8. * For Coyote or Hemi combinations currently using Holley EFI or Terminator X, use Smart Coil Ignition Harnesses 558-312 and Coil Extension Harnesses 558-326 for a plug-and-play solution. * For new Holley EFI installations on Coyote engines, use with Holley EFI Coyote TI-VCT Main Harness for Smart Coils 558-122 and Smart Coil Ignition Harness 558-312 for a plug-and-play solution. Features: * Direct bolt-on to factory valve covers * Same wiring pinout as other IGN-1A coils for easy plug-in upgrades (Will not work with factory wiring) * More spark energy than any other smart coil on the market for maximum fuel burn during combustion sequence * Low current draw means less demand on the electrical and charging system * Built-in ignitor for compatibility with Holley EFI and many other aftermarket ECUs * Maximum operating voltage of 18 V—for compatibility with both 12 V and 16 V electrical systems found in many performance/race applications
Not Yet Reviewed
$799.95
$718.95
On Sale
Make Holley SBF Hi-Ram EFI intake manifold bases the foundation for your custom induction system. Their modular design allows them to accept a variety of carbureted and EFI tops. Plus, their runner length and tapered cross-section are designed to perform well for a wide range of engine configurations. Aggressive looks and bold styling make your bad intentions clear—whether you're drag racing, truck pulling, or making waves in your boat—when you start with the Holley Hi-Ram EFI intake manifold bases. SBF Hi-Ram EFI intake manifold base features and specs: * Manifold base only designed for 8.2 in. deck height * Cast aluminum construction * Available in natural cast aluminum (satin) or black powdercoat finish * EFI fuel rails are machined for -8 AN O-ring fittings, with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system
( 1 )
$996.95
—
$1,049.95
$648.95
—
$682.95
On Sale
Holley EFI speedometer gauges complement your other instruments with precision and style. Designed specifically for use with Holley EFI systems, they can also be used as a standalone unit—and are available in two sizes, in both black and white face versions. The gauges are compatible with all Holley EFI touch screens, dashes, hand-held tuners, and other CAN devices, making them great for Holley EFI users looking to install a combination of needle gauges and LCD accessories. Holley EFI speedometer additional details: * Wire directly into the vehicle's 16-pin OBDII data link connector * Operate by receiving data from the ECU through the OBDII data link connector * 0 to 160 mph range with multi-function LCD display, including mileage/trip odometer and peak speed recall * Slim-style mounting requires very little dash space for installation * 240 degree sweep pointer from 8 to 4 o'clock makes gauges easier to read at a glance * Internal microprocessor ensures accurate pointer movement in street and racing conditions * Spin-lock ring threads to back of gauge case for simple and secure gauge mounting * CNC-machined billet aluminum threaded bezels with anodized finish
( 2 )
$599.95
$538.95
On Sale
Holley Ford Hi-Ram carbureted intake manifold bases have a runner length and tapered cross section designed to perform well for a wide range of engine configurations. Holley's engineering team also redesigned the water crossover passage to allow room for distributor phasing. Aggressive, bold, race-bred styling will make bad intentions clear for drag race, muscle car, marine, off-road, sandrails, pulling trucks, track, street-rod applications and more! Holley Hi-Ram specs: * Cast aluminum construction * Available in natural or black finish * Plenum top gasket type—3/32 in. round O-ring cord
( 2 )
$728.95
—
$799.95
$655.95
—
$718.95
On Sale
The amazing HydraMat fuel pickups feature Holley's patent pending design that solves the problems associated with traditional fuel pick-ups in stock fuel tanks, as well as racing fuel cells. During hard cornering, acceleration, stopping, inclines, and low fuel conditions fuel runs away from the fuel pick up which introduces air into the system resulting in poor engine performance and even stalling. The Holley HydraMat fuel pickups are the solution! Surface tension and fluid wicking are the secrets of the HydraMat, giving it the amazing ability to draw from nearly any area that has contact with fuel and then store it in its internal reservoir. As an area of the HydraMat is uncovered, the tiny pores of the media seal off through surface tension, forcing fuel to be contained in the reservoir and drawn from other areas of the mat where fuel continues to be available. The sheer size and coverage area of the HydraMat allows it to pull fuel from virtually any area in the tank or cell eliminating the need for specialty reservoirs and pick up pumps saving cost and greatly reducing complexity. Holley HydraMats are available in various sizes and shapes to fit a wide variety of stock fuel tanks and/or race fuel cells. Features and benefits: * Patent pending design that solves the problems associated with traditional fuel pick-ups in stock fuel tanks as well as racing fuel cells * Greatly reduces the potential for air to enter into the fuel system which can result in poor engine performance and/or engine stalling * Perfect for vehicles experiencing fuel starvation during hard cornering, acceleration, stopping, inclines, and low fuel conditions * Surface tension and fluid wicking allow the HydraMat to continue to draw fuel from the tank or cell even when part of the mat uncovered * As an area of the HydraMat is uncovered, tiny pores in the media seal off through surface tension, forcing fuel to be drawn from other areas of the mat where fuel continues to be available * Unique internal reservoir assists in keeping fuel available at the pickup even under extreme fuel slosh conditions * Eliminates the need for specialty reservoirs, sumps and pick up pumps saving cost and greatly reducing complexity * Also acts as a 15 micron pre-filter eliminating the need for a separate filter before the fuel pump * Can be folded and compressed for easy installation through a variety of fuel cell openings * HydraMats are also available in other sizes and shapes to fit a variety of stock fuel tanks and/or race fuel cells * Not for use with diesel fuels
( 65 )
$983.95
—
$1,049.95
$639.95
—
$682.95
On Sale
Holley is the new standard in EFI! The Holley EFI LT1 Gen V Ultra Lo-Ram intake manifold kits are designed for GM Gen V LT engines equipped with GM LT cylinder heads. They will work with OE or aftermarket cylinder heads. The Ultra Lo-Ram intake manifolds are designed for forced induction (supercharged or turbocharged) engine applications. The front-feed base intake manifold is designed with a lower overall height to fit under a stock or mildly modified hood. The Ultra Lo-Ram provides a very low-profile modular intake manifold along with various fabrication flanges to aid the fabrication of special throttle body adapters or inlet ducts for custom installations. Whether you're engine swapping your classic car or need to manage added horsepower in your twin-turbocharged drag radial race car, Holley EFI has the solutions you need to get your project up and running better than ever! Features: * Designed for GM Gen V engines equipped with GM LT type cylinder heads * As-cast aluminum (satin) and black powdercoat finishes available * 105mm diameter throttle body opening accepts OEM 4-bolt LS/LT DBW or Holley LS/LT throttle bodies * Engineered for forced induction (supercharged or turbocharged) engine applications with peak power at 7,000-8,000 rpm depending on the application * Only 0.97 in. taller than a factory LT1 manifold provides maximum clearance under a stock or mildly modified hood * Modular design and front entry plenum flange allows design and fabrication of special throttle body adapters or inlet ducts for custom installations—base manifold, plenum top, throttle body adapter available as separate kits * Clears C7 Corvette cowls and hoods without modification * Available for OE direct fuel injection only or with added port fuel injection provisions * Kits with port injection provide high volume fuel rails with 3/4-16 O-ring ports (8 AN). Mounting hardware is included * Ultra Lo-Ram kits with a burst panel flange are available, Ultra Lo-Ram billet burst panel duct is offered separately (PN: 300-608 clear anodized, PN: 300-608BK black anodized)
Not Yet Reviewed
$1,049.95
$558.95
—
$649.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
