Availability
Holley Sniper 2 EFI Inline Pump Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters for before and after the pump, fittings and hardware, cushioned mounting brackets, and an external, inline pump * Can be used with 3/8 in. factory sending units or add a dedicated bulkhead fitting * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 18 )
$1,799.95
—
$1,899.95
Holley Sniper 2 EFI Inline Pump Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters for before and after the pump, fittings and hardware, cushioned mounting brackets, and an external, inline pump * Can be used with 3/8 in. factory sending units or add a dedicated bulkhead fitting * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 24 )
$1,699.95
—
$1,949.95
Introducing Holley Sniper EFI 2300 two-barrel fuel injection systems! They're perfect for any vehicle that came standard with a 2300 Holley flange, like some Fairlanes, F100s, Javelins, Mustangs, Thunderbirds, Cougars, and more. These systems are economically priced so you can have all the benefits of EFI and still have money to finish or upgrade your ride! Put an end to cold start issues, hesitations, vapor lock, and flooding. Upgrade to Sniper EFI and get the tactical accuracy of EFI today! Features/Benefits: * Bolt-on 2300 flange carburetor replacement * Throttle body mounted ECU (kits only); no extra boxes to mount * Supports up to 350 hp with two 100 lb./hr. injectors * Only 4 wiring connections required! (Battery +, Battery -, Switched Ignition, and RPM) * Internal fuel pressure regulator eliminates the hassle of plumbing an external fuel pressure regulator (preset to 58.5 psi) * Integrated ignition timing control * High-resolution full color touch screen for initial setup, tuning, and gauge displays * Simple Calibration Wizard (answer a few questions about your engine and it creates the base map, then starts tuning on its own); NO laptop required! * Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI * The included Genuine Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learn * OEM-style TPS/IAC and fuel pressure regulator for years of dependable service * Included clamp-on oxygen sensor kit for 2.25 in. exhaust ensures a leak-free oxygen sensor installation, with stainless steel T-bolt clamps and a stainless steel (weldable) oxygen sensor flange * Equipped with C4 / C6 Ford transmission kick down lever, as well as TH350, 400, and 700R4 provisions * Accepts many common 5 1/8 in. OEM or aftermarket air cleaner assemblies * Master Kit includes complete fuel system consisting of: 20 ft. of 3/8 in. vapor guard fuel hose, 12-920 fuel pump, filters, necessary hardware and bulkhead fitting to return fuel into the tank * Sniper EFI software free to download which allows for real time tuning
( 56 )
$1,549.95
—
$1,599.95
Holley Sniper 2 EFI Base Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * For applications using a vehicle specific EFI conversion tank and fuel pump, or already having a fuel system capable of the required 55-65 psi, these systems are offered without a pump and fuel lines * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 10 )
$1,649.95
—
$1,999.95
Holley Terminator X Stealth 4150 EFI systems feature 4 or 8, 100 lb. fuel injectors capable of supporting up to 650 hp naturally aspirated, and 600 or 1250 hp on forced induction applications. The Terminator X ECU is capable of fuel map self-learning and ignition timing control, improving idle stability, drivability, and wide-open throttle horsepower! The throttle body has the standard 4150 carburetor flange so it will bolt down where your square bore carburetor was. Holley Terminator X Stealth 4150 systems also include transmission kick-down provisions for GM TH350, TH400, 200R4, 700R4, and Ford's C4 and C6 applications!
( 9 )
$1,999.95
Holley Sniper EFI Stealth 4150 fuel injection systems feature four 100 lb.-hr. fuel injectors capable of supporting up to 650 hp naturally aspirated. The Sniper Stealth 4150 ECU is capable of fuel map self-learning and ignition timing control--improving idle stability, drivability, and wide-open throttle horsepower! These systems also include transmission kickdown provisions for GM TH350/400, 200R4/700R4 and Ford C4/C6 applications. The 4150 is available individually or in a complete Master Kit (see contents listed below). ALL Sniper EFI Stealth 4150 systems feature: * Bolt-on 4150 flange carburetor replacement * Throttle body mounted ECU; no extra boxes to mount * Supports up to 650 hp with four 100 lb.-hr. injectors * All of the wiring exits below the rear fuel injector cover—for a completely stealth installation * Timed spark part for vacuum advanced distributors located under the front fuel bowl—for easy access to the distributor * Air entry is machined to fit most stock-style air cleaners with air cleaner locator provisions * Only four wiring connections required (battery +, battery -, switched ignition, and RPM) * External fuel pressure regulator required, set to a base pressure of 58.5 psi, such as 12-886 * Integrated ignition timing control * High-resolution full-color touch screen for initial setup, tuning, and gauge displays * Simple calibration wizard (answer a few questions about your engine and it creates the base map, then starts tuning on its own); NO laptop required * Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI * The included genuine Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learn * OEM-style TPS/IAC and fuel pressure regulator, for years of dependable service * Included clamp-on oxygen sensor kit for 2.25 in. exhaust ensures a leak-free oxygen sensor installation, with stainless steel T-bolt clamps and a stainless steel (weldable) oxygen sensor flange * Available in three finishes: shiny, ceramic black, and classic gold MASTER KITS also include complete fuel system with an external fuel pressure regulator preset to 58.5 psi, 20 ft. of 3/8 in. Vapor Guard fuel hose, fuel pump, filters, necessary hardware, and bulkhead fitting to return fuel into the tank.
( 41 )
$1,549.95
—
$1,849.95
Holley Sniper EFI BBD master kits will be right at home on any powered trail rig or weekend cruiser. Not only does the Sniper EFI BBD offer superior throttle response and WOT power over the carburetor, but you can also gain timing control! Put an end to cold start issues, hesitations, vapor lock, and flooding—upgrade to Holley Sniper EFI. Features include: * Bolt-on BBD carburetor replacement * Engineered specifically for 1971-86 Jeep CJs with 258 cu. in. 6-cylinder engines * Throttle body-mounted ECU--no extra boxes to mount * Supports up to 350 hp with two 100 lbs./hr. injectors * Only four wiring connections required—Battery +, Battery -, Switched ignition, and rpm * Internal fuel pressure regulator eliminates the hassle of plumbing an external regulator * Includes complete fuel system: 20 ft. of 3/8 in. vapor guard fuel hose, fuel pump, filters, necessary hardware, and bulkhead fitting to return fuel into the tank * High-resolution full color touch screen for initial setup, tuning, and gauge displays * Simple calibration wizard: answer a few questions about your engine and it creates the base map, then starts tuning on its own—no laptop required! * Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI * Genuine Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * OEM-style TPS/IAC and fuel pressure regulator, for years of dependable service * Included clamp-on oxygen sensor kit for 2.25 in. exhaust; ensures a leak-free oxygen sensor installation, with stainless steel T-bolt clamps and stainless steel (weldable) oxygen sensor flange * Available in Classic Gold, black, shiny polished
( 10 )
$1,699.95
Holley Sniper EFI Quadrajet self-tuning fuel injection systems are ideal replacements when you're tired of rebuilding the 50-plus-year-old Rochester Quadrajet (Q-jet) on your classic ride. They're the first bolt-on, spread-bore, EFI throttle-body systems not requiring any additional adapters, sealing plates, or intake manifold swaps. They retain the same great features as the 4150 Sniper EFI version (four 100 lbs.-hr. injectors; built-in timing control; high resolution 3.5 in. full color touchscreen; etc.). Their throttle body will support naturally aspirated power up to 500 hp. In addition, they offer multiple fuel inlet configurations that allow for a stock-appearing installation and fit most stock air cleaners. Modernize your Q-jet-powered classic vehicle with a Holley Sniper EFI Quadrajet self-tuning fuel injection system. They are offered individually or in Master kits with external fuel pressure regulator preset to 58.5 psi, 20 ft. of 3/8 in. Vapor Guard fuel hose, fuel pump, filters, necessary hardware, and bulkhead fitting to return fuel into the tank. Features, items, and specs: * Designed to deliver the signature "Rochester Roar" at wide-open throttle! * Throttle body-mounted ECU–no extra boxes to mount * Only 4 wiring connections required (battery positive and negative, switched ignition, and rpm) * Transmission provisions on throttle lever for TH350/TH400 and 200R4/700R4 * Universal throttle and transmission kick-down bracket * Brake booster adapter (if required) * Simple calibration wizard (answer a few questions about your engine and it creates the base map, then starts tuning on its own—no laptop required) * Internal fuel pressure regulator preset to 58.5 psi * 20 ft. of 3/8 in. Vapor Guard fuel hose * Fuel pump and filters * Necessary hardware and bulkhead fitting to return fuel to the tank * Genuine Bosch LSU 4.9 wide-band oxygen sensor provides real-time fuel map learning * OEM-style throttle position sensor (TPS) and idle air control (IAC) for years of dependable service * Clamp-on oxygen sensor kit ensures leak-free oxygen sensor installation with stainless steel T-bolt clamps and weld-ready oxygen sensor flange * United States Coast Guard approved (certified to ISO 8846, SAE J1171 requirements) * Available in three finishes--Classic Gold, Shiny, and Black Ceramic
( 7 )
$1,699.95
—
$1,999.95
Holley Sniper 2 EFI Base Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * For applications using a vehicle specific EFI conversion tank and fuel pump, or already having a fuel system capable of the required 55-65 psi, these systems are offered without a pump and fuel lines * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 30 )
$1,549.95
Holley Gen 3 Ultra Dominator carburetors feature a brand new main body, brand new state-of-the-art calibrations, high-volume HP fuel bowls, and sizes up to 1,475 cfm! The metering blocks are fully adjustable (emulsion bleeds, power valve channel restrictors, and idle feed restrictors). These carburetors include redesigned Holley HP fuel bowls for racing. Internal baffling helps to control fuel slosh and minimize float level fluctuations in hard launching or cornering situations. The HP fuel bowls also have material added in key areas (the needle and seat, fuel inlet, and sight window areas) for added strength in demanding race environments and can be plumbed from either side. Some of the many Holley Gen 3 Ultra Dominator carb features include: * Main body 5/16 in. taller than the previous generation * Designed for larger radius air entries optimized using computational fluid dynamics (CFD) software to deliver smoother flow into fully machined, big-bore Venturi * Improved 6061-T6 billet aluminum metering blocks offering improved durability, true gasket sealing (sealing surface integrity), and brightly dipped anodizing for good looks and corrosion protection * Power valve channel restrictors are now machined lower in the metering blocks for improved fuel delivery to the power valve circuit * Accelerator pump channel internally drilled, eliminating the need for an external plug, * Excess material removed for increased fuel capacity * Snap-in-place bowl vent whistle makes removal and/or replacement easier * 20 percent more fuel capacity vs. traditional V-bowl, eliminating fuel starvation and providing consistent air/fuel ratios * Fuel shelf is positioned below the needle and seat to minimize fuel aeration and promote more consistent metering * Fuel trough designed into the floor of the bowl to route fuel flow directly to the jets and assist in keeping them covered by fuel * Clear sight windows on both sides of the bowls for easy and safe fuel level adjustments * Built-in drain plug in the front center of the bowl provides easy access to empty the bowl (contoured entry provides smooth fuel flow directly to the needle and seat) * Designed for use on drag race, Pro Street, or any high-horsepower engines * All-aluminum construction saves 3.8 lbs. over original models (28 percent weight savings) * Dual 50cc accelerator pumps
( 20 )
$1,549.95
—
$1,999.95
On Sale
Holley Terminator X Stealth 4150 EFI throttle bodies provide part of the puzzle for piecing together your EFI system or if your current throttle body suffered damage. They eliminate the need to buy an entire EFI kit to get the service part you need to get back on the street or the track, supporting up to 650 hp on naturally aspirated engines or 1,250 hp with forced induction setups. Holley offers Terminator X Stealth 4150 EFI throttle bodies in your choice of three quality finishes to match your build.
Not Yet Reviewed
$1,649.95
—
$1,949.95
Holley VR Series billet fuel pumps feature brushless pump technology and a twin-screw rotor design. These in-line fuel pumps are capable of high pressures and flows while maintaining a low amperage draw and quiet performance. They are designed to work on high-boosted race cars, endurance cars, and daily drivers. VR pumps will work with gasoline, methanol, and E-85 (compatible for methanol and E85 for competitive drag race use only- when draining and flushing after each race event). The VR1 and VR2 models are capable of a consistent 130 psi, can be fully submerged in the fuel cell or chassis mounted, and feature race-worthy billet aluminum construction for lasting durability and looks. Whether running 300 or 3,000 hp, Holley has a brushless pump for you. Features include: * Pumps can be run in one of two different speeds * Low speed control for low fuel consumption requirements * Full speed for high fuel consumption requirements * Proven for 18.5 V compatibility * Provide sufficient fuel flow for forced induction applications * Built for continuous duty if required * Dual-pump models are designed for endurance racing—use both or one can be a reserve pump * AN O-ring inlet/outlet * High flow and high pressure with low amperage draw * Maximum amp draw of 19 amps for VR1 and 38 amps for VR2 pumps * Not for use on aircraft of any type Note: These pumps are not designed to use standard conical seat-style unions in the inlets or outlets of the pumps. Use of this style fitting will block flow and WILL lead to poor performance and pump failure. The ONLY correct fitting to use is a contoured port fitting with an O-ring seal such as part # EAR-AT985010ERL.
( 1 )
$1,649.95
Holley Sniper 2 EFI Returnless Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters before/after the pump, fittings/hardware, and a low profile returnless drop-in pump module(1.275-inches above the tank mounting surface) that is designed for universal installation into fuel tanks that range from 7 to 12 in. deep * Pre-set, internally regulated pump only requires a single feed line to the Sniper 2 unit * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 2 )
$1,899.95
—
$1,999.95
Holley EFI Gen III Hemi Hi-Ram intake manifolds are for high performance applications where induction system height is not limited. Able to add even more power to your engine, these manifolds have large intake ports and a modular base design with runner lengths and tapered cross-sections that will perform well for a wide range of engine configurations. Their aggressive, bold, race-bred styling will make bad intentions clear for drag race, muscle car, marine, off-road, sandrails, pulling trucks, track, and street-rod applications. Holley EFI Gen III Hemi Hi-Ram intake manifolds feature cast aluminum construction offered with a natural satin or black finish. They are available with either a 95 or 105mm LS-style throttle body or as the manifold base alone for custom induction systems. Features and benefits: * Modular design base accepts a wide range of EFI tops and can be used as the foundation for custom induction systems * EFI fuel rails are machined for -8 AN O-ring fittings with passages large enough to accommodate high fuel flow and dampen pressure pulsations in the fuel system * Intended for use on naturally aspirated, forced induction, or nitrous engines in the 5.7L to 7.2+L range, and maximum power at 7,500 to 8,500 rpm * Works with Gen III Hemi injectors and Bosch EV-1 style injectors * O-ring seal to head offer superior OE-style sealing and are easy to replace * Billet oil fill cap offers an attractive low-profile design * Positive Crankcase Ventilation (PCV) ports with adapter fittings * Port for OE-style Manifold Absolute Pressure (MAP) sensor (1 or 2 Bar) * Cast-in pads for adding nitrous nozzles
( 2 )
$1,549.95
Holley Sniper 2 EFI Return-Type Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, return line, external regulator, filters before/after the pump, fittings/hardware, and a low profile return-type drop-in pump module(1.275-inches above the tank mounting surface) that is designed for universal installation into fuel tanks that range from 7 to 12 in. deep * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
Not Yet Reviewed
$1,899.95
—
$1,999.95
On Sale
Holley continues to push the envelope of intake design with their latest offering: the Sniper fabricated dual plenum intake manifolds! This unique "dual plenum" design offers increased airflow and even dispersion of air to intake ports—solving the two most common problems experienced with many intakes. The manifolds are available in configurations and options for year/make and engine applications from the 1990s and up. Features and benefits of Holley Sniper fabricated dual plenum intake manifolds include: * Dual plenum design—ideal for street max effort engines and boosted applications * 3mm (1/8 in.) thick T-6061 sheet aluminum construction (for durability in high horsepower and boosted conditions) * 100 percent TIG-welded * Available in a choice of bright silver or black anodized finish * Equal runner lengths with tapered intake plenums designed to increase velocity and more evenly distribute airflow to all cylinders * Available in 92mm and 102mm bore throttle body openings * Long intake runner lengths (12.75 in.) offer low-end torque and operating range of 1600-6800 rpm
( 2 )
$1,599.95
Holley Sniper EFI 2GC large bore fuel injection systems let you convert your classic 2GC large bolt pattern carburetor to EFI. These units offer superior throttle response and WOT power over the carb—and you will likely experience increased fuel economy. Put an end to cold start issues, hesitations, vapor lock, and flooding with the accuracy of EFI. You can also use the Sniper EFI 2GC to control the ignition timing, taking electronic fuel injection to the next level. These Holley upgrade systems feature two 100 lb./hr. fuel injectors capable of supporting 350 hp on naturally aspirated engines. The Sniper EFI systems are also available in a Master Kit option, which includes 20 ft. of fuel hose, two filters, one high-pressure EFI fuel pump, and all required fittings for a complete EFI fuel system conversion. Standard and Master Kit systems are available in a choice of throttle body finishes. Standard Sniper EFI system features: * Bolt-on 2GC large bore carburetor replacement * Universal throttle lever with TH350, 700R4 and 200-4R kickdown provisions * Throttle body-mounted ECU; no extra boxes to mount * Only four wiring connections required: Battery +, battery -, switched ignition, and rpm * Internal fuel pressure regulator eliminated the hassle of plumbing an external fuel pressure regulator (preset to 58.5 psi) * Integrated ignition timing control (with MSD Pro Billet, Holley Dual Sync, or Holley Hyperspark distributors) * High-resolution full-color touch screen for initial setup, tuning, and gauge displays * Simple Calibration Wizard (answer a few questions about your engine and it creates the base map, then starts tuning on its own!); NO laptop required * Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI * The included Genuine Bosch LSU 4.9 wideband oxygen sensor provides real-time Fuel Map Learn * OEM-style TPS/IAC and fuel pressure regulator—for years of dependable service * Included clamp-on oxygen sensor kit for 2 in. exhaust ensures a leak-free oxygen sensor installation, with stainless steel T-bolt clamps and a stainless steel (weldable) oxygen sensor flange * Systems are an ideal conversion for 1974-78 Chevrolet, GMC, Oldsmobile, and Pontiac vehicles that came with a Rochester 2GC large bore carburetor.
Not Yet Reviewed
$1,649.95
Holley Sniper 2 EFI Returnless Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters before/after the pump, fittings/hardware, and a low profile returnless drop-in pump module(1.275-inches above the tank mounting surface) that is designed for universal installation into fuel tanks that range from 7 to 12 in. deep * Pre-set, internally regulated pump only requires a single feed line to the Sniper 2 unit * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 2 )
$1,999.95
Holley Sniper 2 EFI Return-Type Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, return line, external regulator, filters before/after the pump, fittings/hardware, and a low profile return-type drop-in pump module(1.275-inches above the tank mounting surface) that is designed for universal installation into fuel tanks that range from 7 to 12 in. deep * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
Not Yet Reviewed
$1,999.95
Holley offers a variety of direct replacement EFI wiring harnesses, including multi-port, sequential, and throttle body injection styles. These units are made with premium components to ensure better reliability and performance for your ride--and they're compatible with many engine swaps. Holley EFI systems wiring harnesses are sold individually or as a kit; choose the model needed for your fuel injection application.
( 31 )
$1,549.95
Holley Fuel Cell EFI pump module/VR Series brushless fuel pump assemblies are engineered to give you VR fuel pump power inside your cell. Designed as direct drop-in replacements for your existing 6-, 10-, or 12-bolt flange fuel cell cap assemblies, they're made to work on high-boosted race cars, as well as your daily driven weekend endurance car. Built for continuous duty if needed, The VR Series of pumps include 2-step controllers for precise low or full speed pump control and harnesses. Holley Fuel Cell EFI pump module kits include all the hardware to install into your existing fuel cell—all you need to add is your fuel line. Features: * Billet top flange includes a -8 AN inlet port, a -10 AN outlet port, and a fuel filler cap * Fuel pump depth is fully adjustable from 7.5 in. to 11 in. deep * Capable of 130 psi, while providing significant flow for forced induction applications where belt-driven pumps are normally used * Billet aluminum construction for durability and good looks * High-flow and high-pressure with low-amperage draw * Can be fully submerged in the fuel cell or chassis mounted * Maximum amp draw of 38 amps for the VR Series * Single VR1 brushless fuel pump includes one 2-step controller and harness * Dual VR2 brushless fuel pumps include two 2-step controllers to control pumps independently of each other and harnesses * Can be used as an upgrade for carbureted systems with the proper regulator
Not Yet Reviewed
$1,599.95
Now available from Holley are LS engine swap accessory drive systems. Included are accessories and pulleys that are manufactured by OEM part suppliers for durability and direct bolt-on installation. Order the kit that's best suited for your vehicle and engine application. Features and facts: * Universal brackets fit virtually all common LS engines, regardless of water pump and harmonic balancer offsets--thus reducing cost and complexity compared with competitive products * Simple, dedicated installation kits allow easy fitment to Corvette, F-Body, or truck drive offsets * Accessories, tensioner, and pulleys are manufactured by OEM suppliers and many of the parts are used on production vehicles today
( 34 )
$1,999.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
