Availability
On Sale
The heart of a fuel system begins with the fuel tank. Secure your tank in place with Holley Sniper fuel tank straps. Available in many styles and shapes to fit a variety of applications, they are made from steel and galvanized for corrosion protection and continued good looks. Holley Sniper fuel tank straps provide a simple and inexpensive solution to alleviate fuel tank issues.
Not Yet Reviewed
$36.17
$19.89
Holley fuel pump module mounting shims are the best way to make sure your module stays secured. Whether you race, off-road or daily drive your vehicle, the module can become loose over time. This can cause leaks, allow gas fumes to get into your ride—or worst-case scenario, your entire pump module disconnects. Order the size needed to help properly secure your fuel pump module application.
( 2 )
$21.00
On Sale
Holley kickdown spring and bracket sets adapt your Holley carburetor for use with your Ford automatic transmission. The brackets have one mounting hole and one locator pin. They're designed for carburetors with a 30cc accelerator pump.
( 39 )
$17.78
$16.00
—
$19.60
On Sale
Holley transmission kickdown brackets are used to mount an overdrive transmission's kickdown cable to the carburetor. They're made of steel and feature a natural or gold iridited finish. These brackets will fit most Holley carburetors, with the exception of Dominators and any carburetor with a factory-installed Ford kickdown. Order the model designed for your carb/tranny application.
( 113 )
$19.58
On Sale
Holley offers base gaskets for every type of Holley carburetor. From the base plate gasket to the air cleaner ring gasket and everything in between, you're sure to find what you need.
( 88 )
$16.51
Holley offers these carburetor throttle body gaskets as direct replacements for their throttle body systems. They are ideal for rebuilds and maintenance use.
( 16 )
$11.17
On Sale
Holley alternator bracket bolt kits are genuine Holley quality parts to mount the Holley Ford 7.3 L Godzilla alternator bracket. These bolts are made from durable steel and can be used as replacement parts or for your new build. From start to finish, Holley has just the parts to make your dream a reality.
Not Yet Reviewed
$20.65
$11.36
On Sale
Direct from Holley come these throttle lever extensions. They are designed to help relocate the throttle lever mounting point for the accelerator cable and readily accept most throttle lever studs for a simple and convenient throttle hookup.
( 25 )
$17.76
$15.98
On Sale
Holley transmission kickdown lever extensions are handy parts used to extend the lower Ford OEM transmission kickdown lever when converting from a 2 barrel to a 4 barrel carburetor or as an effective mounting point for a transmission kickdown.
( 24 )
$12.66
$11.39
On Sale
Holley throttle lever stud bushings are designed to fit into your Holley linkage and allow you to insert the correct throttle ball stud size for your cable. They are made of nylon and include mounting instructions.
( 8 )
$13.97
$12.57
Upgrading to an electric choke? Holley choke block-off plates are designed to seal off the factory choke position on the intake manifold of small block Chevy engines. They're manufactured from aluminum and include mounting hardware for an easy installation. Install your new carburetor with an electric choke and block-off the OEM model with one of these Holley choke block-off plates.
( 13 )
$20.99
On Sale
Some engine swaps and racing applications do not need the heater, but elimination of the heater is difficult on the 7.3-liter Godzilla engine since the hose inlet and outlet passages are tough to plug and look like a cobbled up mess using traditional hoses, clamps, and plugs. Holley Ford 7.3L Godzilla rear block plug kits include a machined steel billet plug with O-ring seal, mounting bracket, and retaining bolt to block off the rear port with a professional look. Features: * Works with Holley's front/heater block-off kit to block all cooling ports * The plug is designed to handle high pressure and high temperatures--typical conditions of the cooling system * Easy installation without the need to tap holes or fabricate special plugs and caps * Steel plug features a clear zinc-plated finish
Not Yet Reviewed
$19.49
$10.72
Protecting your vehicle's engine from fuel contamination starts with Holley Sniper fuel gauge sending unit gaskets. These gaskets are critical to avoiding costly and dangerous fuel leaks. Available in multiple materials and mounting screw counts.
( 1 )
$14.44
Holley harmonic balancer bolts offer the perfect fit to properly install your harmonic balancer on your engine with a Holley mid-mount accessory drive. The replacement hardware is available for Chevy big block or small block applications. Each one includes a balancer bolt and thick washer. Features: * 180,000 psi rating (Grade 9) * Made from steel * Black E-coat finish * Big block--1/2 in. wrench size * Small block--7/16 in. wrench size
( 3 )
$19.60
On Sale
Holley manifold plug and fitting kits allow two different styles of connections within one unit. They are offered to service your mid-mount accessory drive LT/LS, BBC, and SBC cooling manifolds. These genuine Holley fittings are constructed from aluminum and feature a chrome finish for longevity.
( 2 )
$18.18
On Sale
Holley offers replacement timing cover O-ring gaskets for Ford 7.3L Godzilla high-mount accessory drive system front covers 97-401, 94-410, 97-417, and 97-418. These covers are included in the following kits: 20-300(BK), 20-310(BK), 20-320(BK), and 20-340(BK). The rubber O-ring seals are made to factory specs to ensure proper fit and leak-free performance.
Not Yet Reviewed
$19.95
$10.97
Holley carburetor throttle plates replace the old ones located on your vehicle's throttle shaft. They feature a lightweight steel design for durability and are available either drilled or undrilled, depending on your application. The throttle plates come in several diameters to accommodate your specific carburetor's needs.
( 18 )
$20.99
These Holley crankshaft spacers are specifically designed to achieve proper belt alignment. They are precision-machined on CNC equipment for a perfect fit and have a 3-bolt pulley pattern.
Not Yet Reviewed
$16.15
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
