Availability
Panhard rods control lateral movement of the rear axle so that your rear-end stays centered and aligned. Heidts offers classic truck and street rod panhard rods to keep your ride balanced in and out of corners and on rugged off-road terrain. These strong, rigid bars are a must with parallel 4-link suspension kits and are available in bolt-on and weld-on models. You choose either a plain steel or polished stainless steel tube. Heidts classic truck and street rod panhard rods include an axle bracket, a bar with a stainless adjuster, urethane bushings, and a frame bracket. Make a move to better handling with Heidts panhard rods.
( 3 )
$162.00
Add Heidts classic truck 4-link kits with coilovers and a panhard rod—and you'll have a rear suspension with the most excellent ride for any classic truck. These kits attach directly to the stock frame rails; no cutting or modifications are needed. You set the ride height with the adjustable axle brackets, and a bolt-in upper crossmember for coilovers is included. Choose your 4-link kits in plain steel or polished stainless steel. Install the beginnings of a great ride with Heidts classic truck 4-link kits.
( 3 )
$1,018.00
Get your street rod up and rolling and improve your vehicle's suspension, handling, and performance with one of these Heidts Mustang II front suspension kits. Kits include: * Crossmember * Tubular upper and lower full A-frame style control arms * 11 in. diameter brake rotors * Bearings * Seals * Shocks * Springs * Stock-type spindles * Manual rack and pinion mounted to the front of the crossmember for additional engine clearance * Outer tie rod ends * Rubber spring cushions * Spindle nuts * All necessary mounting hardware
( 5 )
$2,486.00
Make your IFS stock upgrade a natural conversion with Heidts Mustang II crossmember kits. They are precut and pre-fitted, so you'll have no measuring, no grinding, no trimming, and no mistakes! Heidts crossmember kits are ready to install when you are. Main crossmembers are constructed from only two formed pieces for maximum strength with an accurate fit and feature the strong design of vertical inner uprights offering twice the weld area to keep your frame from twisting. Crossmembers and spring towers with built-in anti-dive are pre-welded to fit your frame and one-piece shock cups are TIG-welded in place. Kit components may vary by application, but most include all of the special, hard-to-make brackets and mounts that you need to complete the install. Heidts kits retain the original suspension to give you the correct design, correct camber action, and no bump steer! Everything is pretty much done but the installation--that, you'll have to do yourself! But never fear--Heidts Mustang II crossmembers include a step-by-step, fully-illustrated instruction book to walk you through your install.
( 8 )
$591.00
Heidts offers these front disc brake kits for several applications. They're available to update early stock spindle disc brake kits and are designed for use with Heidts Superide suspension systems. They are constructed with top-quality rotors and calipers in a variety of configurations for the ultimate in braking performance.
( 2 )
$2,051.00
Independent front suspension gives you twice the ride of a new 4-link dropped axle at a comparable cost. These Heidts Superide independent front suspension packages have been engineered for a correct, safe ride, while providing the ultimate stance. They feature a one-piece crossmember with upper control arms that clear the fenders, and their 56 in. hub-to-hub tread width gives you the narrow look without any tire-to-fender clearance problems. The packages include specially designed one-piece 1045 heat-treated alloy steel spindles to give you the lowest possible ride available, the high-tech appearance you want, and assurance of the right geometry, right fit, and a great ride. Nearly a hundred packages are available to fit applications from the 1920s and up. Components include: * Heidts one-piece crossmember * Superide spindles * Tubular upper and lower control arms * Front disc brake kit with 11 in. diameter brake rotors and 4-piston brake calipers * Manual rack and pinion steering, rear mounted * Billet single adjustable coilover shocks with silver powdercoated springs
Not Yet Reviewed
$4,826.00
—
$4,923.00
Heidts has stabilizer bars for the front and rear of your hot rod and muscle car applications. Constructed from heat-treated steel, these anti-sway bars will help make your ride more stable and combat body roll. You'll feel more in control and enjoy your drive more. Keep the contact between your tires and the winding roads more level with Heidts stabilizer bars.
( 22 )
$284.00
—
$700.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
