Availability
For the price, no other part can give you the horsepower and fuel economy improvements of Hedman headers. They make Hedman Street headers so well that they guarantee them to be free from defects--including cracks in the tubes and welds--for the life of the headers. Hedman Street headers are available uncoated or in Black Maxx or their polished HTC thermal ceramic coated finishes and, as an added bonus, they also come with all necessary gaskets and mounting hardware. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts, and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom-altered parts, then it is the installer's responsibility to verify fitment. Special warning regarding Hedman painted headers only. The paint on these headers is not designed as a final finish; it is designed to protect the headers after the manufacturing process and during shipping. This paint will not withstand the high heat associated with engine break-in, nor will it withstand the heat cycles associated with any type of driving. It is recommended that this protective coating be stripped, and a high heat paint or coating designed for use on headers be applied.
( 2439 )
$262.99
—
$923.99
If you think you are tough on your performance parts, but stainless is not in your budget, then Hedman Elite extreme-duty headers may be the right fit for you project. Their heavier duty construction takes the punishment, and their quality design dishes out the power! They feature thick wall 14-gauge mild steel primary tubes with 3/8 in. flanges to prevent warping for a longer lasting, leak-free seal. Hedman Elite extreme-duty headers are available with the matte silver or Black Maxx ceramic coatings that withstand temperatures up to 1,400 degrees F.
( 385 )
$566.99
—
$880.99
Hot rodding has always been about taking two or more parts that were never designed to work together and make then work together seamlessly. It is a never-ending effort to shove as much horsepower and torque under a vehicle's hood as possible. Unfortunately, any project can come to a screeching halt when it comes to bolting up a set of headers. Hedman Hot Rodz engine swap headers are specifically designed for non-factory engine and vehicle model combinations. Available in mild steel or stainless with 16-gauge header tubes uncoated and coated. The HTC silver and Black Maxx ceramic-metallic coatings offer superior heat insulation and anti-corrosion properties to protect your "Hedder" investment and retain more heat inside the header tubes for increased exhaust velocity and improved scavenging.
( 69 )
$278.99
—
$714.99
Headers are widely believed to be one of the best performance values available today--so why put stock manifolds on your trick ride? After dropping a different engine into your project vehicle, help it produce more horsepower and fuel economy with these specialty and engine swap headers from Hedman. They feature durable 18-gauge steel construction and have thick 1/4 in. flanges for a long-lasting, leak-proof seal. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment. Special warning regarding Hedman painted headers only. The paint on these headers is not designed as a final finish; it is designed to protect the headers after the manufacturing process and during shipping. This paint will not withstand the high heat associated with engine break-in, nor will it withstand the heat cycles associated with any type of driving. It is recommended that this protective coating be stripped, and a high heat paint or coating designed for use on headers be applied.
( 182 )
$279.99
—
$766.99
Hedman traditional block hugger headers feature a design that is ideal for factory manifold replacements or engine swap projects that do not have a header designed specifically for that application. Hedman block huggers have an extremely low profile, only Hedman Tight Tubes headers offer more clearance. They are offered in mild steel and stainless steel either coated or uncoated to meet your performance and budgetary needs. The HTC and Black Maxx ceramic-metallic coatings offer superior heat insulation and anti-corrosion properties to protect your "Hedder" investment and retain more heat inside the header tubes for increased exhaust velocity and improved scavenging.
( 61 )
$264.99
—
$729.99
Hedman Tight Tubes offer the lowest profile header collector available. Chosen by professional car builders and seasoned gearheads, with Hedman's innovative 4-into-1 Tight Tubes the collector tucks the header tubes and hook-ups against the engine block for more component clearance than ordinary street rod headers. And, the larger volume collector design provides exhaust flow that surpasses standard block hugging designs. Available in mild steel with 16-gauge header tubes uncoated and coated. The HTC silver and Black Maxx ceramic-metallic coatings offer superior heat insulation and anti-corrosion properties to protect your "Hedder" investment and retain more heat inside the header tubes for increased exhaust velocity and improved scavenging. For tight engine compartments, choose Hedman Tight Tubes—the headers that go where ordinary headers won't.
( 31 )
$394.99
Give your header tubes a great place to meet with these Hedman slip-on collectors. These steel collectors are available in several diameters for V6 and V8 Hedman Hedders.
( 1 )
$106.99
Bring your header tubes together with these Hedman weld-on collectors. These collectors are available for V6s and V8s, in a variety of sizes to suit your needs.
( 1 )
$39.99
Hedman ball and socket header flange kits permit you to convert your gasket-style or race-style header collector to a gasket-free ball-style. These adapters are made from stainless steel and require no gasket. The kits contain a ball collector, socket exhaust adapter, flanges, bolts, and nuts to complete your install.
( 3 )
$160.99
Hedman LS Engine Swap Black Maxx Headers use smooth flowing, CNC mandrel-bent tubes that are hand-welded to ensure each pair is identical to the next. The stout 3/8 in. header flanges ensure a great seal that will resist warping, and Hedman's unique, gasket-less ball and socket collector design allows your Corvette, Camaro, or Firebird's exhaust system to bolt up, even if it is not perfectly aligned with the header collectors. The tough Black Maxx matte black ceramic coating on these headers is good up to 1,400 degrees F. It helps keep underhood temperatures down and prevent rusting of the headers. Order the size and style recommended for your vehicle.
( 1 )
$634.99
—
$706.99
Protect your investment with Hedman Hedder bolts. These Grade 5 bolts are heat-treated for added strength and reliability. They come in your choice of black oxide or zinc plated finishes and are available in several sizes to fit your application.
( 29 )
$13.99
—
$15.99
Hedman offers these collector rings in a variety of sizes to suit your needs. Get the parts you need from a name you can count on.
( 3 )
$9.99
Help to eliminate the leaks and blown header gaskets that are generally associated with loose bolts and tighten things up with Hedman collector bolt kits. Their collector bolt kits come complete with all of the zinc coated fasteners required to bolt up one pair of collectors. You can count on Hedman for all of your header and collector bolt needs.
( 8 )
$11.99
Hedman replacement part kits are designed to replace worn components that originally came with your Hedman headers. The kits use top quality components for a perfect fit.
( 4 )
$35.99
—
$136.99
Hedman 304 stainless steel headers offer your exhaust system 100 percent mandrel-bent, 16-gauge tubes and hefty 3/8 in. flanges constructed from 100 percent 304 stainless steel for superior heat and fatigue resistance. They are available ceramic coated or raw. The HTC and Black Maxx ceramic-metallic coatings offer superior heat insulation and anti-corrosion properties to protect your "Hedder" investment and retain more heat inside the header tubes for increased exhaust velocity and improved scavenging. Unless otherwise noted, these 304s are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 39 )
$814.99
—
$1,411.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
