Availability
If you’re serious about squeezing every drop of performance from your ride, Haltech engine management calibration technology is built to get you there! Since 1986, the...
If you’re serious about squeezing every drop of performance from your ride, Haltech engine management calibration technology is built to get you there! Since 1986, the real-time engine management pioneers at Haltech have been helping automotive enthusiasts and racers achieve peak performance from the drag strip, to the road course, to the street. Whether you’re tuning a hot rod or customizing your daily driver, the company’s gear plays it clean and legal with gear made for on-road, off-road, and sanctioned competition use. Summit Racing carries a variety of Haltech ECU kits, universal plug-and-play systems, digital displays,...
If you’re serious about squeezing every drop of performance from your ride, Haltech engine management calibration technology is built to get you there! Since 1986, the real-time engine management pioneers at Haltech have been helping automotive enthusiasts and racers achieve peak performance from the drag strip, to the road course, to the street. Whether you’re tuning a hot rod or customizing your daily driver, the company’s gear plays it clean and legal with gear made for on-road, off-road, and sanctioned competition use. Summit Racing carries a variety of Haltech ECU kits, universal plug-and-play systems, digital displays, tuning tools, sensors, and much more!
Haltech's Rebel LS ECU kits provide the most cost-effective, easy-to-install, start-up and drive aftermarket ECU experience. Designed for Gen 3 or 4 LS engines, the all-in-one kit concept simplifies your purchase decision, eliminating the need for costly additional accessory purchases. Each kit arrives with a Rebel ECU, main engine harness and adapter harnesses for throttle, injectors, T56 tranmission, (DBW -Gen 4) or (cable throttle and IAC – Gen 3) alternator, knock sensor, existing GM MAP, oil pressure sensors, along with a Bosch O2 and air temp sensor with weld bungs. Installation is a breeze, using a labeled and pre-terminated drop-in harness, which easily connects to existing factory LS sensors. Engine start-up is made easy through the Setup Wizard in the Haltech NSP software and the soon-to-be-released Haltech Connect app. Answer six questions – LS Engine type, cam, throttle body, MAP, injectors and coils with the Wizard prompting a throttle calibration and system check, ensuring an engine that will quickly start, idle and drive. Drivability is continually improved with Haltech's advanced self-learning while additional tuning for your N/A, turbocharged, supercharged or nitrous LS is achieved through Haltech's NSP software. Finally, the Rebel LS ECU kit is compatible with Haltech's plug-and-play CAN accessories, such as the iC-7 dash, keypads, PDM, EGT, wideband and flex-fuel sensors.
( 2 )
$1,495.00
HalTech offers a variety of data acquisition components, including the iC-7 Color Display Dash. With a crisp, clear and full color display, this unit lets you see things in a brand new way. Designed and manufactured in Australia with motoring enthusiasts in mind, the iC-7 offers market-leading perks in a unique, state-of-the-art package. Featuring auto-dimming ambient light reactive brightness, user-programmable multi-color shift light bar, and more, the iC-7 connects directly to all current HalTech ECUs via a CAN network. * Ideal replacement for individual analog gauge clusters * Easy to install and configure * User-adjustable brightness control with automatic dimming * User-configurable channels, units and alarms * 14 programmable, 7-color shift light LEDs * Controlled via easily accessible, face-mounted control buttons * Configuration via HalTech iC-7 software and USB cable * Suits: All current HalTech ECUs via CAN. Also Plug-and-Play compatible with the following aftermarket ECU brands: Link, MaxxECU, Microtech, MoTeC M1 series, MoTeC hundred series (M400,600,800 gold box ECUs), Syvecs. * Includes: Haltech iC-7 Display Dash, 34 Pin main connector harness (including spare pins for input wiring), DTM-4 to DTM-4 CAN extension cable, USB to M5 right angle cable, USB Cable, Mounting Screws, USB flash drive with iC-7 Software, Quick Start Guide, HalTech stickers and a fabric keyring tag * Notes: OBD-II and Stand-alone versions also available.
Not Yet Reviewed
$1,195.00
HalTech uC-10 digital dash displays offer crisp, clear, and full color viewing compatible with Haltech CAN, OBD2, and selected aftermarket ECU brands. They can also be wired in as a complete standalone unit. The versatility of the uC-10 dashes ensures they can seamlessly integrate into a wide range of vehicles and setups, while offering plenty of scope for sensors and other inputs in a standalone configuration or as an I/O expander in a HalTech environment. Each kit includes dash, connector, cables, momentary switches, and Wi-Fi antenna, along with a HalTech fabric key tag, quick-start guide, and stickers. Features: * Full-color, optically bonded TFT screen * 70-degree minimum viewing angle (vertical and horizontal) * 1280 x 480 resolution, 600+ lumens * IP64 (Dust-tight and protected against water splashes) * 6-digit odometer * 512MB of on-board looped data logging * NSP compatible * 10 user configurable AVIPs * 4 user configurable DPOs * 4 user configurable SPIs * 1 dedicated tachometer input * 1 dedicated alternator excite * 2 ambient light sensors
Not Yet Reviewed
$1,995.00
HalTech Single Channel CAN O2 Wideband Controller Kits are smaller, lighter and waterproof! The new controllers can now be safely fitted inside your engine bay. The kits are available in different models: -- Suits: BOSCH LSU 4.9 SENSOR * Includes: Single Channel, CAN Wideband Controller, 4.9LSU Sensor, CAN Cable (4 ft./1200mm), Power Supply Cable, Weld-on Bung, Quick Start Guide. * Notes: The ideal CAN expansion accessory for all Elite Series ECUs. -- Suits: NTK SENSOR * Includes: Single Channel, CAN Wideband Controller, NTK Sensor, CAN Cable (4 ft./1200mm), Power Supply Cable, Weld-on Bung, Quick Start Guide. * Notes: Best product for methanol powered vehicles
( 2 )
$375.00
—
$550.00
HalTech Nexus R3 with universal wire-in harness kits are ideal for dedicated race cars, engine swaps and custom wiring jobs. The harness has a set of VCU connectors at one end and unterminated wires at the other. All the wires at the unterminated end are color-coded and clearly labeled. Connect your HalTech VCU to the terminated end and follow your wiring diagram for all the engine connections. Load your base map and you're ready to go! * Color-coded and labeled wires that match the detailed wiring diagram for a confusion free construction process. * The wiring diagram is accompanied by the full VCU manual and software located on the USB key provided with the VCU, or downloadable from the HalTech website. VCU OVERVIEW: * Nexus R3 combines the functionality of a power distribution module, a data logger, a wideband controller, and a state-of-the art engine management system in one powerful device HalTech calls a VCU (Vehicle Control Unit) * 4 x 25A (continuous) push-pull PWM capable (5 kHz) outputs (for power to injectors / coils, transbrake, thermofan, fuel pump) * 8 x peak/hold injector drivers (can be used as low side drive outputs) * 8 x low current ignition outputs (can be used as low side drive outputs) * 6 x low side drive outputs, PWM capable (DPOs) * 6 x push-pull /H-bridge outputs (8A, PWM capable), e.g. for electronic throttle * 11 x 0-5 V analog inputs with redundancy for electronic throttle and switchable 5 V pullup * Trigger and home inputs with differential inputs, adjustable thresholds and glitch filters * 6 x synchronous pulsed inputs, zero crossing or adjustable thresholds - cam sensor inputs, frequency inputs or 0-5 V analog inputs * 1 x on-board wideband controller, supporting NTK and LSU4.9 * 1 x on-board 4 bar MAP sensor * 2 x CAN ports with switchable termination * Suits: Engines with up to 8 cylinders or up to 4 rotors. Racing applications where advanced race features, data logging and power management control are required. * Includes: Nexus R3 VCU, SurLok connectors (red and black), WiFi antenna, mounting bolts, USB-C cable, USB-C dust cap, USB drive with NSP software. Nexus R3 universal wire-in engine harness.
Not Yet Reviewed
$2,799.00
HalTech offers a variety of data acquisition components and accessories to facilitate engine management and automotive performance. These "Red" single-channel hall effect sensor components are made from high-quality materials and built to ensure proper fit and function. * Thread: M12 x 1.0 * Suits: Wheel Speed, Crank/Cam etc. * Includes: Matching set of Deutsch DTM 3 connectors (HT-031014)
( 1 )
$88.00
HalTech's Elite 2500 is a two-connector, stand-alone ECU ideal for popular late model performance and racing applications, recommended for engines, EFI conversions, and engines with multiple variable camshafts. Featuring a robust environmentally sealed water-resistant IP67-rated case, drive-by-wire throttle control, intake and exhaust cam control, short-term and long-term map learning, dual channel knock control, and much more, the Elite 2500 ECU provides engine calibrators with the tools they need to get the job done right. The Elite 2500 ECU is now paired with the new Nexus Software Programmer (NSP) that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer true cutting-edge technology to tuners and performance enthusiasts worldwide. HalTech has been at the cutting edge of engine management technology since it first opened its doors in 1986. They're well-known for their high horsepower engine management, which complements their array of harnesses and add-ons. Product Overview: * Includes: Elite 2500 ECU with DBW and Race Functions, USB programming cable * Supports 1 to 12-cylinder engines * 2 to 4 rotor engines * Normally aspirated or forced induction * Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF) * Staged, Sequential, semi sequential, batch or multipoint injection patterns * Distributor ignition systems, multi-coil systems, expand CDI range or Haltech Multiplex CDI systems * Connect to a wide range of display dashes and expansion devices via CAN * Waterproof case (with pocket cover fitted) * 8 x fuel injection outputs * 8 x ignition outputs * 12 x digital outputs * 10 x analogue voltage inputs * 4 x synchronized pulsed inputs * 4 x dedicated inputs (dual knock, ignition switch and onboard MAP Sensor) * 2 x dedicated engine position Inputs with extensive trigger type support * Up to 45 channels of input and output (I/O) expansion (via CAN) * USB Laptop communication (Windows) * Now using the new NSP Calibration Software
Not Yet Reviewed
$1,959.00
HalTech Nexus Ti4L transmission interface kits allow easy control of GM's popular 4L series of automatic transmissions. Designed as an add-on transmission controller expansion module for the NEXUS ECU and VCU range, the Ti4L will be programmed via the HalTech NSP software, or Rebel LS users will be able to follow the simple setup wizard in the Haltech Connect app. Easy set-up is not the only feature! They have also developed smart long-term learning strategies via closed-loop line pressure control, which means shifting gets better the more you drive. Features include: * Plug-and-play with Nexus Rebel LS terminated harnesses * Easy setup wizard for Rebel LS ECU * Programming and setup via NSP Software or Haltech Connect app * Long-term learning strategies via closed-loop line pressure control * Haltech 500 psi pressure sensor included Compatibilty: * Haltech Nexus Series ECUs and VCUs, including Rebel LS * GM 4L60E * GM 4L65E * GM 4L70E (non-4x4 2006-08 only) * GM 4L80E * GM 4L85E nNon 4x4 1994 and newer only) Note: Does not support Haltech Elite/Platinum/Legacy ECUs
Not Yet Reviewed
$457.99
HalTech offers a variety of data acquisition components and accessories to facilitate engine management and automotive performance. These replacement HalTech sensors are used to measure fluid pressure and temperature. Available in different psi ranges, each sensor includes matching plug and pins, and is individually electronically tested before packaging. Select the psi needed.
Not Yet Reviewed
$160.00
HalTech Dual Channel CAN O2 Wideband Controller Kits are smaller, lighter and waterproof! The new controllers can now be safely fitted inside your engine bay. * Suits: Bosch LSU 4.9 Sensor * Includes: Dual Channel, CAN Wideband Controller, 2 x 4.9LSU Sensor, CAN Cable (4 ft./1200mm), Power Supply Cable, 2 Weld-on Bung, Quick Start Guide. * Notes: The ideal CAN expansion accessory for all Elite Series ECUs.
Not Yet Reviewed
$550.00
—
$750.00
HalTech's vast array of data acquisition components includes the TCA-8 Eight Channel Thermocouple Amplifier--a direct plug-and-play, compatible with a NEXUS VCU, an Elite ECU CAN port, Elite ECU harness, CAN connector, or multiple CAN device installation using an Elite 4 Port CAN HUB. * Includes: Eight Channel Thermocouple Amplifier, CAN cable, DTM-4 to Circular Connector Cable 1200mm / 4-ft., Quick Start Guide * Suits: Elite and NEXUS Series ECUs only
Not Yet Reviewed
$549.00
HalTech's new multi-function CAN gauge displays real-time data from your HalTech ECU. Easily customize your gaugeART CAN Gauge to display the data you want to see with the included gaugeART CAN Gauge App (requires Android 4.4 or later or Apple iOS 9.1 or later). The easy-to-use app on your smartphone or tablet uses a wireless connection to the gauge for easy setup and customization. * Set up via gauge-mounted buttons or a mobile app * High-contrast, dimmable OLED display * 1, 2, or 4 gauge layouts on up to 10 different pages * Custom warning points with special warning screens SUPPORTED PARAMETERS: Boost Pressure Air/Fuel Ratio Coolant Temperature Fuel Pressure Ethanol content Air Temperature Battery Voltage Coolant Pressure EGT Fuel Level Fuel Trim Gear Position Injector Duty Nitrous Pressure Oil Pressure RPM Transmission Line Pressure Throttle Position Transmission Oil Temperature Turbo RPM Wheel Speed Wheel Slip * Above can be displayed without additional sensors. COMPATIBLE WITH: Haltech Platinum Sprint Series Haltech Platinum Sport Series Haltech Pro Plugin Series Haltech Elite Series Haltech Nexus Series
Not Yet Reviewed
$430.00
For boost control select a Haltech solenoid. Available in a 3-port or a 4-port model that control a wider range of boost pressure, each includes hose fittings, rubber isolated mount, and matching DTM 2 plug and pins set. Both are compatible with HalTech ECUs. Select the boost control solenoid desired for your setup.
Not Yet Reviewed
$130.00
—
$145.00
HalTech offers a variety of data acquisition components and accessories to facilitate engine management and automotive performance. Their "TI" pressure sensors for fuel/oil/wastegate are designed for remote mounting (not mounted directly into the fuel rail or engine block)—and connected via a flexible hose. They are individually electronically tested before packaging, available in different psi ratings, and include matching plug and pins, along with a -4 AN adapter. Select the HalTech "TI" pressor sensors with the psi needed.
( 1 )
$200.00
—
$205.00
HalTech offers a variety of data acquisition components and accessories for automotive performance and engine management applications. These firewall wiring grommets are molded from durable EPDM rubber and are available in different inside and outside diameters. They protect wires from sharp edges and abrasion when routed through the firewall to your gauge panel.
( 4 )
$16.00
HalTech offers replacement coolant temperature sensors for a variety of applications. They're available in different thread configurations: Model 010300 includes: Matching Delphi plug and pins Model 010304 includes: Matching male Deutsch DTM-2 connector
( 1 )
$52.00
HalTech offers a variety of data acquisition components and accessories to facilitate automotive performance and engine management. These replacement oil temperature sensors are built to fit and function like the original parts, with a max reading of 302 degrees F. The sensors include matching Bosch EV1 plug and pins.
Not Yet Reviewed
$88.00
HalTech Bosch DBW pedal assemblies include plugs and pins. Used to provide pedal position information to the ECU, these drive-by-wire pedal assemblies are for use with an electronic throttle body and an ECU that supports DBW throttle control. Features: * 16-Degree (70mm) travel * Firewall-mounted hanging design * Dual Potentiometer redundancy * Includes mating connector set
Not Yet Reviewed
$135.00
HalTech offers a variety of data acquisition components and accessories to facilitate engine management and automotive performance. These 4-ft. extension harnesses are designed for use with HalTech CAN wideband controllers (LSU 4.9). They're made from high-quality materials to ensure proper connection and long-lasting performance.
Not Yet Reviewed
$52.00
HalTech offers a variety of data acquisition components and accessories to facilitate engine management and automotive performance. These Genuine Bosch knock sensors use a 5/16 in. mounting bolt, and include matching plug and two pins. Knock sensors detect pre-ignition and detonation, an irregular knocking vibration of the engine which could potentially be damaging. Sensors are in place to contribute to the improvement and fuel economy of engine performance.
Not Yet Reviewed
$80.00
—
$110.00
HalTech Elite 4-port CAN hubs instantly integrate into your HalTech system. These plug-and-play units allow you to expand the functionality of your ECU by permitting the connection of multiple CAN-based expansion devices. Each CAN hub includes a 300mm direct connection cable to link the CAN hub to an Elite Series ECU, and two or more hubs can be connected together.
Not Yet Reviewed
$125.00
HalTech offers a variety of data acquisition components and accessories to facilitate engine management and automotive performance. This replacement flex fuel sensor is built to fit and function just like the original part. It measures the ethanol-gasoline ratio of the fuel being used in your flexible fuel vehicle. * Suits: 3/8 in. "GM Spring Lock" fittings * Includes: Matching plug and 3 pins
Not Yet Reviewed
$205.00
HalTech offers a wide range of data acquisition components, including this 12-Position Rotary Trim Module (Boost/Fuel/LGN, etc.). It includes two position decals and a matching set of Deutsch DTM 3 connectors (HT-031014).
Not Yet Reviewed
$82.00
HalTech offers a wide range of automotive parts to service or maintain your vehicle. These replacement air temperature sensors are designed to fit and perform just like the originals. They're available in a variety of fitting styles and sizes for both universal and model-specific applications.
Not Yet Reviewed
$52.00
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
