Availability
Haltech uC-10 digital dash displays offer crisp, clear, and full color viewing compatible with Haltech CAN, OBD2, and selected aftermarket ECU brands. They can also be wired in as a complete standalone unit. The versatility of the uC-10 dashes ensures they can seamlessly integrate into a wide range of vehicles and setups, while offering plenty of scope for sensors and other inputs in a standalone configuration or as an I/O expander in a Haltech environment. Each kit includes dash, connector, cables, momentary switches, and Wi-Fi antenna, along with a Haltech fabric key tag, quick-start guide, and stickers. Features: * Full-color, optically bonded TFT screen * 70-degree minimum viewing angle (vertical and horizontal) * 1280 x 480 resolution, 600+ lumens * IP64 (Dust-tight and protected against water splashes) * 6-digit odometer * 512MB of on-board looped data logging * NSP compatible * 10 user configurable AVIPs * 4 user configurable DPOs * 4 user configurable SPIs * 1 dedicated tachometer input * 1 dedicated alternator excite * 2 ambient light sensors
Not Yet Reviewed
$1,995.00
HalTech's Elite 1500 is a 2-connector, standalone ECU ideal for popular late model performance and racing applications. Recommended for 4-cylinder, drive-by-wire (DBW) or 2-rotor engines, EFI conversions, and engines with multiple variable camshafts. Featuring a robust environmentally sealed water-resistant IP67-rated case, drive-by-wire throttle control, intake and exhaust cam control, short-term and long-term map learning, dual channel knock control, and much more, the Elite 1500 ECU provides engine calibrators with the tools they need to get the job done right. The Elite 1500 ECU is now paired with the new Nexus Software Programmer (NSP) that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer true cutting-edge technology to tuners and performance enthusiasts worldwide. Additional product details: * Supports 1 to 12 cylinder engines * 2 rotor engines * Normally aspirated or forced induction * Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF) * Staged, sequential, semi sequential, batch or multipoint injection patterns * Distributor ignition systems, multi-coil systems, expand CDI range, or HalTech Multiplex CDI systems * Connect to a wide range of display dashes and expansion devices via CAN * 4 x fuel injection outputs * 4 x ignition outputs * 12 x digital outputs * 10 x analog voltage inputs * 4 x synchronized pulsed inputs * 3 x dedicated inputs (knock, ignition switch and onboard MAP Sensor) * 2 x dedicated engine position inputs with extensive trigger-type support * Up to 45 channels of Input & Output (I/O) expansion (via CAN) * USB laptop communication (Windows) * NSP Calibration Software, intuitive and easy to use * Outputs: Up to 4 injector and 4 ignition * Suits: Popular late-model performance and racing applications. Recommended for 4-cylinder, DBW or 2-rotor engines, EFI conversions, and engines with multiple variable camshafts. * Includes: Elite 1500 ECU with DBW and Race Functions, USB programming cable and software on a USB drive * Notes: Available with universal wiring, terminated engine harnesses, or model-specific plug-n-play adapter kits
Not Yet Reviewed
$1,599.00
Haltech's Elite 2500 is a two-connector, stand-alone ECU ideal for popular late model performance and racing applications, recommended for engines, EFI conversions, and engines with multiple variable camshafts. Featuring a robust environmentally sealed water-resistant IP67-rated case, drive-by-wire throttle control, intake and exhaust cam control, short-term and long-term map learning, dual channel knock control, and much more, the Elite 2500 ECU provides engine calibrators with the tools they need to get the job done right. The Elite 2500 ECU is now paired with the new Nexus Software Programmer (NSP) that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer true cutting-edge technology to tuners and performance enthusiasts worldwide. Haltech has been at the cutting edge of engine management technology since it first opened its doors in 1986. They're well-known for their high horsepower engine management, which complements their array of harnesses and add-ons. Product Overview: * Includes: Elite 2500 ECU with DBW and Race Functions, USB programming cable * Supports 1 to 12-cylinder engines * 2 to 4 rotor engines * Normally aspirated or forced induction * Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF) * Staged, Sequential, semi sequential, batch or multipoint injection patterns * Distributor ignition systems, multi-coil systems, expand CDI range or Haltech Multiplex CDI systems * Connect to a wide range of display dashes and expansion devices via CAN * Waterproof case (with pocket cover fitted) * 8 x fuel injection outputs * 8 x ignition outputs * 12 x digital outputs * 10 x analogue voltage inputs * 4 x synchronized pulsed inputs * 4 x dedicated inputs (dual knock, ignition switch and onboard MAP Sensor) * 2 x dedicated engine position Inputs with extensive trigger type support * Up to 45 channels of input and output (I/O) expansion (via CAN) * USB Laptop communication (Windows) * Now using the new NSP Calibration Software
Not Yet Reviewed
$1,959.00
Haltech's Elite 750 ECU with premium universal wire-in harness is ideal for dedicated race cars, engine swaps, and custom wiring jobs. The Elite 750 ECU is an entry-level ECU offering many features available on the more advanced Elite 1500/2500 at an affordable price. Featuring a robust, environmentally sealed, waterproof case, six fuel and six ignition channels, on-board data logging and flex fuel tuning, the Elite 750 is a powerful, compact ECU. The premium universal wire-in harness has a set of ECU connectors at one end and unterminated wires at the other. All the wires at the unterminated end are color coded and clearly labelled. Simply connect your Haltech Elite 750 ECU to the terminated end and follow your wiring diagram for all the engine connections, then load your base map and you're ready to go! Like all Elite Series ECUs, the Haltech Elite 750 now uses the Nexus Software Programmer (NSP) that brings levels of functionality and user friendliness never seen before in an engine control package. Together they offer true cutting edge technology to tuners and performance enthusiasts worldwide. Product Overview: * Includes: Elite 750 ECU, premium universal wire-in harness. firewall grommet, molded six power circuit Haltech fuse box and lid, 2 relays, 6 fuses and pins for the 6 spare power circuits, waterproof USB cap, and USB programming cable * Supports 1 to 6-cylinder engines, 1 to 3 rotor engines * Normally aspirated or forced induction * Load sensing by Throttle Position (TPS), Manifold * Absolute Pressure (MAP) or Mass Air Flow (MAF) * Staged, sequential, semi-sequential, batch or multipoint injection patterns * Distributor ignition systems, multi-coil systems, expand CDI range or Haltech Multiplex CDI systems * Connect to a wide range of display dashes and expansion devices via CAN * Waterproof case (IP67) (with USB cover fitted) * 34-position AMP connector * 6 x fuel injection outputs (peak and hold (0-8A peak / 0-2A hold) * 6 x ignition outputs * 2 x dedicated engine position inputs with extensive trigger type support * 2 x digital pulsed inputs * 5 x digital pulsed outputs * 2 x analogue voltage inputs * 3 x dedicated inputs (throttle position, coolant temperature and air temperature) * Internal 3Bar MAP sensor rated up to 200kPa of boost (2Bar/29 psi) * Up to 45 channels of input and output (I/O) expansion (via CAN) * USB Laptop Communication (Windows) * On-board data logging * NSP Calibration Software—intuitive and easy to use
Not Yet Reviewed
$1,575.00
—
$1,688.00
The Nexus S2 ECU is the successor to the acclaimed Elite 1500, offering a serious upgrade in performance and functionality. With advanced features, user-friendly interface, and seamless connectivity, the S2 redefines the standard for engine management systems in the automotive industry. Haltech offers several ways to wire your S2 ECU. Haltech Nexus S2 ECU with a plug and pin set allows you to adapt the factory wiring harness to fit your Haltech ECU. Simply remove the factory connectors and crimp the plug and pin set on. You can now connect your Nexus 2S ECU directly to your factory harness. If your car is not supported by Haltech's plug-and-play options and you're using the factory engine harness, this is an ideal choice. Features: * Superseal connector * 34-pin (Key 1) plug and pins * Plug and pin set compatible with Haltech Nexus products that use the Key 2/34 position connector
Not Yet Reviewed
$1,814.99
Haltech Nexus S2 ECU is the successor to the acclaimed Elite 1500, offering a serious upgrade in performance and functionality. The S2 engine control units combine all the classic functionality of the Elite 1500 with new features and the superior processing power of the successful Nexus platform. Haltech Nexus S2 ECUs suit engines with up to four cylinders or up to two rotors, as well as racing applications where advanced race features and data logging is required. Kits include Nexus S2 ECU, mounting bolts, USB-C cable and dust cap, Quick Start Guide and wiring diagram. Inputs/outputs: * 4 Peak/hold injector drivers (can be used as low side drive outputs) * 4 Low current ignition outputs (can be used as low side drive outputs) * 6 Low side drive outputs, PWM capable (DPOs) * 4 Push-pull / half bridge outputs (8A, PWM capable), e.g. for electronic throttle * 1 ECR output * 11 0 to 5V analog inputs with redundancy for electronic throttle and switchable 5V pullup * Trigger and home inputs with differential inputs, adjustable thresholds and glitch filters * 6 Synchronous pulsed inputs, zero crossing or adjustable thresholds - cam sensor inputs, frequency inputs or 0-5V analog inputs * 1 On-board wideband controller, supporting NTK and LSU4.9 * 1 On-board 4-bar MAP sensor * 2 CAN ports with switchable termination
Not Yet Reviewed
$1,694.99
Haltech offers a variety of data acquisition components and digital dashboard displays, including the iC-7 Stand-Alone Classic Kit. With a crisp, clear and full-color display, the iC-7 Display Dash lets you see things in a brand new way. Designed and manufactured in Australia with motoring enthusiasts in mind, the iC-7 offers market-leading options in a unique, state-of-the-art package. Featuring auto-dimming ambient light reactive brightness, user-programmable multi-color shift light bar, and more, the iC-7 connects directly to all current Haltech ECUs via a CAN network. * Ideal replacement for individual analogue gauge clusters * Easy to install and configure * User-adjustable brightness control with automatic dimming * User-configurable channels, units and alarms * 14 programmable, 7-color shift light LEDs * Controlled via easily accessible, face-mounted control buttons * Configuration via Haltech iC-7 software and USB cable * Quick and easy installation into a Non-EFI vehicle * Coolant Temp Sensor - 1/8 NPT thread * Adapter - Brass 1/8 in. NPTF to 3/8 in. NPTF * Suits: Perfect for old-school hot rods, mechanically injected muscle, carbureted classics and everything in between, the Haltech stand-alone IC-7 Classic kit is ideal for anyone looking to simplify and modernize their analog gauge setup. Suits carbureted or mechanically injected vehicles and/or vehicles without an ECU. * Includes: 1 x Haltech iC-7 Dash. 1 x iC-7 Semi Terminated Harness. 1 x 1/8 NPT Coolant Temperature Sensor. 2 x 0-150 Psi Fuel/Oil Pressure Sensors. 1 x 3/8 NPTF to 1/8 NPTF Adapter.
Not Yet Reviewed
$1,875.00
Haltech Elite 1500 ECU with basic universal wire-in harness is ideal for dedicated race cars, engine swaps and custom wiring jobs. The ECU features a robust environmentally sealed water-resistant IP67-rated case, drive-by-wire throttle control, intake and exhaust cam control, short-term and long-term map learning, dual channel knock control, and much more. The Elite 1500 provides engine calibrators with the tools they need to get the job done right. The basic universal wire-in harness has a set of ECU connectors at one end and unterminated wires at the other. All the wires at the unterminated end are color-coded and clearly labelled. Connect your 1500 ECU to the terminated end and follow your wiring diagram for all the engine connections. Load your base map and you're ready to go! The Elite 1500 is now paired with the new Nexus Software Programmer (NSP) that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer cutting-edge technology to both tuners and performance enthusiasts worldwide. Product Overview: * Includes: Elite 1500 ECU with DBW and Race Functions, basic universal wire-in harness. waterproof USB cap, and USB programming cable (does not include fuse and relay box) * Elite 1500 is a two-connector, stand-alone ECU ideal for popular late model performance and racing applications * Recommended for 4-cylinder, drive-by-wire (DBW) or 2 rotor engines, EFI conversions, engines with multiple variable camshafts * Supports 1 to 12-cylinder engines, 2 rotor engines * Normally aspirated or forced induction * Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF) * Staged, sequential, semi-sequential, batch or multi-point injection patterns * Distributor ignition systems, multi-coil systems, expand CDI range or Haltech Multiplex CDI systems * Connect to a wide range of display dashes and expansion devices via CAN. * 4 x fuel injection outputs * 4 x ignition outputs * 12 x digital outputs * 10 x analogue voltage inputs * 4 x synchronized pulsed inputs * 3 x dedicated inputs (knock, ignition switch & onboard MAP Sensor) * 2 x dedicated engine position inputs with extensive trigger type support * Up to 45 channels of input and output (I/O) expansion (via CAN) * USB laptop communication (Windows) * NSP Calibration Software—intuitive and easy to use * Color-coded and labelled wires that match the detailed wiring diagram for a confusion-free construction process * The wiring diagram is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration
Not Yet Reviewed
$1,959.00
Haltech's Elite 1500 ECU with plug and pin set is ideal for popular late model performance and racing applications. The Elite 1500 is a two-connector, stand-alone ECU that provides engine calibrators with the tools they need to get the job done right. The Elite 1500 ECU features a robust environmentally sealed water-resistant IP67-rated case, drive-by-wire throttle control, intake and exhaust cam control, short-term and long-term map learning, dual channel knock control, and much more. The Elite 1500 ECU is now paired with the new Nexus Software Programmer (NSP) that brings levels of functionality and user-friendliness never seen before in an engine control package. Together they offer true cutting-edge technology to tuners and performance enthusiasts worldwide. Product Overview: * Includes: Elite 1500 ECU with plug and pin set * Plug and pins only amp 26 and 34-pin, 4-row, 3-Key Superseal Set * Recommended for 4-cylinder, drive-by-wire (DBW), or 2 rotor engines, EFI conversions, and engines with multiple variable camshafts * Elite 1500 ECU features a robust environmentally sealed water-resistant IP67-rated case, drive-by-wire throttle control, intake, and exhaust cam control, short-term and long-term map learning, dual channel knock control, and much more * Supports 1 to 12-cylinder engines and 2 rotor engines * Normally aspirated or forced induction * Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP), or Mass Air Flow (MAF) * Staged, sequential, semi-sequential, batch or multipoint injection patterns * Distributor ignition systems, multi-coil systems, expand CDI range or Haltech Multiplex CDI systems * Connect to a wide range of display dashes and expansion devices via CAN * 4 x fuel injection outputs * 4 x ignition outputs * 12 x digital outputs * 10 x analogue voltage inputs * 4 x synchronized pulsed inputs * 3 x dedicated inputs (knock, ignition switch and onboard MAP Sensor) * 2 x dedicated engine position inputs with extensive trigger type support * Up to 45-channels of input and output (I/O) expansion (via CAN) * USB laptop communication (Windows) * NSP Calibration Software—intuitive and easy to use
Not Yet Reviewed
$1,684.00
The Nexus S2 ECU is the successor to the acclaimed Elite 1500, offering a serious upgrade in performance and functionality. With advanced features, user-friendly interface, and seamless connectivity, the S2 redefines the standard for engine management systems in the automotive industry. Haltech offers several ways to connect your S2 ECU. If you are using a factory harness and are after an easy ECU upgrade, Haltech Nexus S2 ECUs with a plug-and-play adapter harness are excellent choices. They plug directly into the ECU and have a set of factory connectors on the other side which plug straight into the factory harness, allowing you to be up and running in just a few hours. The included quick-start guide will walk you through installation of the adapter harness into your vehicle. Select the Haltech S2 ECU and harness kit designed for your vehicle. Kits include: * Nexus S2 ECU * Injection molded plastic plug-and-play adaptor harness * M14 x 1.5 air temp sensor with matching plug and pins * Auxiliary I/O 16-pin Tyco plug and pins
Not Yet Reviewed
$1,969.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
