Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
FuelTech WB-O2 Sensors
Designed for use with their WB-O2 Nano, Alcohol O2, WB-O2 Datalogger, and WB-O2 Slim products, FuelTech WB-O2 sensors measure the amount of oxygen in your vehicle's exhaust gases. Your engine's computer uses this data to help figure out the current air/fuel ratio. FuelTech also offers an alcohol model designed for high horsepower alcohol combinations, providing high accuracy and low AFR readings. Maintain fuel efficiency and emissions standards with the FuelTech WB-O2 sensor best suited for your application.
Not Yet Reviewed
$99.00
FuelTech IGN1A Inductive Smart Coils
FuelTech's IGN1A inductive Smart Coils are the perfect ignition coil for your high performance application, with up to 175mj of energy and a long spark discharge time of 3.2ms. These coils provide great idle characteristics, as well as the power to needed run your engine with high cylinder pressures from boost, nitrous injection, or even high strung naturally aspirated applications. Max dwell can be up to 9ms for short periods of time to extract the maximum output from the coil when under high boost or load. Under normal driving conditions 5ms of dwell is recommended. At 9ms of dwell time, these coils will consume 20 amps each while sending 150mA of current to the spark plug! At 5ms they will consume 8 amps each—so make sure you account for that when wiring them up on your vehicle. Installing IGN1A coils with one of FuelTech's PRO550 or PRO600 harnesses is a breeze with their plug-and-play V8 smart coil harness, giving you a complete wiring solution for both your engine management and high performance ignition system.
( 2 )
$89.00
FuelTech Exposed Tip Thermocouples
FuelTech exposed tip thermocouples are engineered to provide faster and more accurate Exhaust Gas Temperature (EGT) readings, due to their lower thermal inertia, which allows them to respond quickly to temperature fluctuations. FuelTech exposed tip thermocouples are available in several wire lengths. Each thermocouple comes with a weld-in bung for proper installation into the exhaust manifold, along with an additional ferrule for compatibility with other EGT bung brands. Order the FuelTech exposed tip thermocouple designed for your application needs. Additional notes: * Temperature range: 32 degrees F to 2,200 degrees F * The K-Type EGT probe is compatible with the EGT-8 CAN and ETM-1 conditioners
Not Yet Reviewed
$99.00
FuelTech CDI Racing Ignition Coils
FuelTech CDI racing coils were developed to be used with the FuelTech FTSPARK on engines running individual coils and also rotary engines. The coils are designed to be used ONLY in conjunction with capacitive discharge ignitions (like a FTSPARK, for example). Using the coils with inductive ignition drivers will damage them. Do not use with FuelTech SparkPRO. Recommended spark plug wires: MSD Super Conductor, MSD-31193.
( 2 )
$79.00
FuelTech WB-O2 Nano Unterminated Harnesses
FuelTech offers a variety of complete and ready-to-install harnesses as well as unterminated harnesses for the various FuelTech ECUs and accessories like FTSPARK and Peak & Hold systems. FuelTech WB-O2 Nano unterminated harnesses are ready to wire your wideband oxygen sensor display and conditioner. They are offered in 3 ft., 6.5 ft. (recommended size for most applications), and 15 ft. lengths. Easily install a Nano with the help of FuelTech's unterminated harnesses.
Not Yet Reviewed
$69.00
—
$79.00
FuelTech Temperature Sensors
FuelTech's temperature sensors are engineered to provide accurate, real-time data for high-performance automotive and racing applications. The benefits of the FuelTech's temperature sensors stem from their durability, precision, and seamless integration with FuelTech's engine management systems (ECUs). By monitoring the temperature of the intake air and fuel, the ECU can make fine-tuned adjustments to fuel delivery and ignition timing to ensure a consistent air-fuel mixture for maximum power and efficiency.
Not Yet Reviewed
$69.00
FuelTech Hall Effect Converters
FuelTech hall effect converters are designed to read an analog VR signal and transform init to a digital signal (Hall). This is recommended when using VR speed sensors (found in most ABS systems) or when using VR fuel flow meters. (Note: Not compatible with differential hall-effect or magneto-resistive sensors.)
Not Yet Reviewed
$99.00
FuelTech Vacuum Distribution Manifolds
FuelTech puts performance in your hands. Their vacuum distribution manifolds offer the perfect solution for running and organizing the vacuum lines on your race car. They feature seven vacuum ports (four 1/8 in. NPT and three 1/4 in. NPT) providing plenty of room to run all of your vacuum lines for blow-off valves, wastegates, and more. FuelTech vacuum distribution manifolds are crafted from billet aluminum, black anodized, and tagged with the FuelTech name.
Not Yet Reviewed
$89.00
FuelTech Remote Mount Pressure Sensor Blocks
FuelTech's remote pressure sensor mounting blocks are the perfect solution to mount your pressure sensors in one common place. Each port is individually connected from top-to-bottom, allowing you to run up to four separate pressure sensors on a small lightweight billet mounting block away from vibration and for easier access. (Sensors are sold separately.)
( 1 )
$89.00
FuelTech Throttle Position Sensors
FuelTech designed their throttle position sensors (Ford) for specific Mustangs using aftermarket throttle bodies, such as Accufab Racing and Wilson Manifolds. They directly monitor the open position of the TB plates, which helps your computer (ECU) figure out how much air is coming in. Boost your engine's performance by providing accurate data in one of the most critical applications with a FuelTech throttle position sensor.
Not Yet Reviewed
$79.00
FuelTech Cylinder Head Temperature Thermocouples
The design of FuelTech's cylinder temperature thermocouple, with its ring tip design, offers lower thermal inertia, allowing it to react quickly to temperature fluctuations to provide faster and more accurate readings during cylinder head temperature fluctuations. The thermocouple can signal the operator if the engine is approaching an over-temperature condition, allowing them to take action to help prevent permanent engine damage.
Not Yet Reviewed
$99.00
FuelTech NanoPRO Bosch LSU 4.9 Harnesses
FuelTech offers NanoPRO harnesses specifically designed for use with Bosch LSU 4.9 oxygen sensors. The 78 in. harnesses are the typical length for most applications. They are compatible with FuelTech NanoPRO products, but not with FuelTech WB-O2 Nano.
Not Yet Reviewed
$69.00
FuelTech Pressure Sensors
FuelTech pressure sensors are great for logging oil pressure, fuel pressure, boost pressure, or even exhaust back pressure on a turbo motor. The sensors will require an open ADC port on your ECU, or an auxiliary circuit to allow extra data to display on the computer screen and on your datalog files. These pressure sensors are available in a variety of PSI ranges.
Not Yet Reviewed
$89.00
FuelTech FT600 Weld-On Mount Kits
Simplify installation of your FuelTech FT600 extreme performance ECU and dashboard with one of these FT600 weld-on mounting kits. These steel CNC laser-cut weld-on mounting panel mounts have a durable black powdercoat finish and will give a completed, professional look to your vehicle's interior.
Not Yet Reviewed
$59.00
