Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
Availability
FuelTech FT Injector Fuel Injectors
FuelTech FT injectors were developed to accurately deliver fuel from low to full-load on your engine. They're compatible with any ECU available on the market. The injectors are available in a variety of advertised flow rates, individually or in sets of eight. Additional product notes: * REAL flow—all injectors are tested and calibrated to ensure linearity, repeatability, and accuracy * Internal components are resistant to corrosion, guaranteed by the salinization test carried out on all raw materials used * Reduce the number of injectors, connections, and hoses in your engine package * Compatible with any type of fuel (gasoline, ethanol, nitromethane, nitropropane, MTBE, and ETBE) * Tested and approved on 4,000+ hp engines * Best cost benefit flow x price
Not Yet Reviewed
$209.00
—
$3,032.00
FuelTech Turbocharger Speed Sensors
FuelTech turbocharger speed sensors are designed to obtain vital data in order to determine whether the turbo is operating within its compressor map and at its highest efficiency. By inputting blade count you can measure rotational speed and maximize your turbo output, thus, allowing you to gain valuable data on turbo selection. Available with or without mating plug kit. Note: This sensor will not read until the turbo speed is above 5,000 rpm, if spinning the wheel by hand, the sensor will read 0 rpm.
Not Yet Reviewed
$529.00
FuelTech Boost Controller Dual Valve Kits
FuelTech boost controller dual valve kits use the active control function of the wastegate valve pressure for a more precise control of turbo pressure in street, circuit, and drag race cars. The control can be performed by time after 2-step, by gear and engine RPM, by gear elapsed time, by a single target, or by engine RPM—besides specific targets for 2-step, 3-step. and burnout mode. Modify the pressure signal for the performance you want with a FuelTech boost controller dual valve kit.
Not Yet Reviewed
$319.00
FuelTech Junior Dragster Throttle Bodies
FuelTech Junior Dragster throttle bodies are engineered to convert any small engine application to electronic fuel injection. They integrate seamlessly with FuelTech EFI systems and FuelTech injectors, allowing for accurate tuning and stable idle control. Their billet aluminum construction and anodized finish ensure reliability and durability under demanding race conditions, making them a trusted component for all applications. Key features: * Compatible with FuelTech high impedance injectors (tall version) * Integrated throttle position sensor with included connector kit * Adjustable cable mount * Idle control screw * Clockwise rotation * -6 ORB fuel fitting for injector * 44mm diameter on mating side
Not Yet Reviewed
$249.00
FuelTech Pressure Sensors
FuelTech pressure sensors are great for logging oil pressure, fuel pressure, boost pressure, or even exhaust back pressure on a turbo motor. The sensors will require an open ADC port on your ECU, or an auxiliary circuit to allow extra data to display on the computer screen and on your datalog files. These pressure sensors are available in a variety of PSI ranges.
Not Yet Reviewed
$89.00
FuelTech Davis Driveshaft Sensors
FuelTech driveshaft sensors from Davis Technologies are extremely high-quality hall effect-type, capable of measuring speeds up to 15 KHz. These sensors are triggered by ferrous metal, not magnets, allowing you to trigger from FuelTech's custom rings, gear teeth, or even bolt heads.
Not Yet Reviewed
$175.00
FuelTech Peak and Hold 8A/2A Injector Drivers
FuelTech Peak and Hold 8A/2A injector drivers are 4-channel low impedance units designed to keep up with the demands of today's high horsepower engine fuel injectors. The peak and hold circuit opens the injector with a high current (Peak) pulse--and then switches the current down to hold the injector open to feed the volume. Additional details: * Controls up to 4 injectors with impedance below 1.5 ohm * 16 Bosch 160 lbs./h (1600cc) injectors (4 per channel) * 8 Siemens low-impedance injectors (2 per channel) * 4 MSD low impedance injectors (2 per channel) (with 2 ohms impedance per injector) Package includes: * 1 Peak and Hold 8A/2A * 1 operation and installation guide * 1 mounting kit (four rubber mounts, four washers and four 1/4 in. nuts) * 6 ft. Peak and Hold unterminated harness (optional) * 1 FuelTech black carbon fiber sticker
Not Yet Reviewed
$239.00
FuelTech FT700 Plus EFI System
FuelTech FT700 and FT700 Plus systems represent the next evolution in engine management systems. Each with an intuitive interface that is compatible with most operating systems, lightning-fast processing, expansive storage capacity, and an abundance of advanced features, these units put the power to maximize engine performance at your fingertips. Whether for seasoned professionals or demanding enthusiasts, FuelTech FT700 and FT700 Plus ECU systems represent the future of engine management and the pinnacle of automotive performance. FuelTech FT700 programmable VCUs feature a 12 in. display, and encrypted Wi-Fi and Bluetooth connectivity, providing secure access to your VCU with the ability to receive and transmit data, without cables. Adjust settings, modify tuning parameters, perform datalogger analysis including telemetry, and receive or transmit data in real time from laptops, desktops, tablets, or smartphones. Versatile connectivity options and the ability to connect up to three devices simultaneously streamline data analysis and tuning modifications. Connectivity: * Built-in GPS and accelerometer * Connect up to three devices simultaneously * Connect via Wi-Fi, Bluetooth, or USB * 36 configurable inputs * 50 configurable outputs * Multimedia ports * USB ports * Built-in wideband O2 sensor controllers * GPS port * Multiple communication ports Dashboard: * 20 configurable LEDs -- 8 LEDs, 4 on either side of the screen for alerts -- 12 LEDs above the screen that act as an engine speed progression bar * Anti-glare screen provides a high-quality viewing experience in any situation * Adjustable screen brightness levels for optimal visibility, tailored to individual preferences * LCD multi-touch screen display -- Increased touch sensitivity makes it easier than ever to scroll between display screens, adjust settings, modify map configurations, or perform datalogger analysis directly from the screen * Fully customizable digital gauge cluster -- VCUs offers a variety of digital gauges and dials to choose from, allowing users to select the function, style, size, and location of each gauge to create a dash built to their needs and preferences Datalogger: * 64 Gb storage * 1,024 channels * Provides real time access to data and updates tuning parameters in real time
Not Yet Reviewed
$5,999.00
