Availability
These Ford Performance Parts F-150 supercharger kits are designed to put approximately 160 hp and 160 ft.-lbs. of torque at the rear wheel. They feature an intercooled design, use the factory throttle body, and include a 95mm mass air meter. Ford Performance Parts F-150 supercharger kits include a Pro-Cal voucher to get your computer custom-calibrated.
( 1 )
$9,619.99
Ford Performance Parts 5.0L Coyote Gen 4X crate engines are modern 5.0L 32-valve DOHC V8s that utilize advanced features, such as direct and port fuel injection, twin independent variable camshaft timing (Ti-VCT), high-flow aluminum cylinder heads, and 12:1 compression to deliver 460 hp and 420 lb.-ft. of torque (with premium fuel). The all-aluminum cylinder block features plasma transferred arc spray-in liners, cross-bolted main bearing caps, and thick main bearing bulkheads for strength. Ford's Gen 4X 5.0L Coyote features a single 80mm throttle body for easier packaging in various applications. Features and specs: * Hypereutectic aluminum pistons * Sintered steel connecting rods as used on the Boss 302 Mustang * Forged steel crankshaft * Single 80mm "drive-by-wire" throttle body * 9.5 qt. steel oil pan * Composite lightweight intake manifold * Mustang GT 409 stainless steel exhaust manifold—right side only * Engine mount bosses and bellhousing mount pattern common to 5.0L modular engines * 10R80 flexplate included * Engine weight: 445 lbs. without front accessory drive components Note: Driver side exhaust flange utilizes 5.2L pattern
Not Yet Reviewed
$11,704.99
Ford Performance Parts 2018 2.3L 310 hp EcoBoost long block crate engines are designed for traditional rear drive installations. They're the same EcoBoost engine found in the 2018 Mustang and feature turbocharging, direct injection, and twin independent variable cam timing (Ti-VCT). The swap possibilities are almost endless: from early street rods, kit cars, most generations of Mustang, to just about any other vehicle build. Ford Performance Parts 2.3L 310 hp Mustang EcoBoost engine kit—this kind of performance comes standard with a dose of adrenaline! Features and items: * 310 hp and 350 lbs.-ft. torque at 3,000 rpm (with 93 octane fuel) * Production turbocharger * Starter and mounting hardware * Alternator and mounting hardware * Flywheel * Engine harness (not installed, must be used with Ford Performance control pack) * Throttle body (not installed, must be used with Ford Performance control pack) * Engine kit uses Ford Performance Parts M-6017-23T control pack (not included) for easy plug-and-play installation
( 1 )
$5,242.99
Ford Performance Parts 5.0L Gen 3 Aluminator short block crate engines are hand assembled using quality high-performance internal parts. Offered in two compression ratios, they serve as a strong foundation for the enthusiast that wants to spec and finish a Coyote build to his or her particular application and needs. Ford Performance engineers have taken care of the toughest part of building a new engine by designing a strong and durable short block that offers a wide range of power possibilities. Additional features and specifications: * 5.0L (302 cu. in.) * Precision internal balanced * Available in 12.0:1 or 9.5:1 compression ratio * Forged steel crankshaft * Mahle hard anodized forged pistons with Grafal low-friction coating * Manley H-beam connecting rods with ARP2000 bolts * 2018+ (Gen 3) production block features cross-bolted main bearing caps and thick main bearing bulkheads for bottom-end strength * Accepts Gen 1, 2, 3 or GT350 cylinder heads with corresponding generation head gasket * Assembled and ready for Coyote heads, cams, timing set, and oil system
Not Yet Reviewed
$7,152.99
Big blocks are back! Ford Performance Parts 572 c.i.d. 655 hp long block crate engines are, once again, ready to make impressive power with excellent drivability—while utilizing premium, unleaded pump gas. They're available with front or rear sump pan. Specs for the Ford 572 c.i.d. long block crate engines: * 655 hp at 5,500 rpm * 710 lbs.-ft. torque at 4,500 rpm * Engine type: 385 Series big block * Bore x stroke: 4.500 in. bore x 4.500 in. stroke * Ford Performance A460 big block * Forged steel crankshaft * Forged steel H-beam connecting rods and bolts * Pistons with floating wrist pins * Hydraulic roller camshaft - Lift: .649 in. - Duration: Intake--259 degrees at .050 in. lift/exhaust--263 degrees at .050 in. lift * Ford Performance aluminum cylinder heads - Dual valve springs with damper - Stainless steel 2.20 in. diameter intake valves - Stainless steel 1.76 in. diameter exhaust valves * Compression ratio: 10.0:1 (nominal) * Required fuel: Premium unleaded * Stainless steel roller rockers * Multi-index timing chain set * Heavy-duty, aluminum body oil pump * SFI-approved vibration damper * Front or rear sump oil pan * Intake manifold * 870 cfm carburetor * Distributor * High performance water pump * Ford Performance Blue 9mm spark plug wires * Note: Built with current available parts
Not Yet Reviewed
$18,367.50
Ford Performance Parts has the complete solution for your drivetrain upgrade needs with the 5.0L Coyote manual power module and T-56 manual transmission combo kit, which includes: * Gen 4X 5.0L Coyote crate engine * Tremec 6-speed manual transmission * Complete engine controller and wiring harness (control pack) It's Next Generation 5.0L power all in one complete powertrain kit. The crew at Ford Performance have spec'd out a kit to simplify the swap of the newest, most innovative 5.0L Coyote engine into just about any Ford vehicle. The Coyote power module teams the Gen 4X 5.0L Coyote V8 with a state-of-the-art Tremec 6-speed transmission, plus all the electronics and hardware to finish the installation. The engine features direct and port fuel injection, twin independent variable camshaft timing, and a lightweight plasma transferred wire arc spray aluminum engine block. Coyote power modules simplify both the shopping and build experience by kitting up the right parts that are matched to deliver potent performance with civilized drivability. The engine control pack is truly plug-and-play and simplifies conversions to a modern electronically fuel injected V8 high performance engine. Details and/or specs: * Gen 4X 5.0L Coyote engine * 460 hp at 7,000 rpm * 420 lbs.-ft. torque at 4,600 rpm * 12.0:1 compression ratio * Aluminum block * Boss 302 alternator kit * Starter and starter index plate * Control pack PCM and installation kit is tunable for power upgrades * Runs on pump gas * Steel Quicktime bellhousing * Roller pilot bearing * Tremec 6-speed transmission 2.66 1st gear * Clutch fork / throw-out bearing * Clutch kit * Billet flywheel * Installation hardware * Note: Engine will be fitted with an automatic flexplate. Included is a billet flywheel, to be installed on engine before installation into vehicle.
Not Yet Reviewed
$19,699.99
Built for high performance applications, the Ford Performance 5.0L Coyote Gen 4 Aluminator SC crate engines are a powerhouse—ideal for custom race builds and 2024 GT Mustangs. While the Aluminator block, cylinder heads, oil pan, and intake manifold are factory pieces, Ford Performance replaces the hypereutectic pistons and sintered-steel rods with Mahle forged slugs, ARP 2000 rod bolts, and Manley forged H-beam rods, keeping the factory 12.0:1 compression ratio in naturally aspirated form and 9.5:1 on its boost-ready Aluminator crate. These flagship crates are quite popular with Ford diehards in the custom car and street rod world—because who really wants to put a Chevy LS in a deuce coupe? Crate engine features and specs: * Fits 2024+ Mustang GT * 5.0L (302 cubic inches) * 9.5:1 compression ratio (nominal) * Mahle hard anodized forged pistons with Grafal low friction coating * Manley H-beam connecting rods with ARP 2000 bolts * Forged steel crankshaft * Uses production 2024 Mustang GT aluminum block * 2024+ Production oil pan * Tuned composite Mustang GT intake manifold with production dual drive-by-wire 80mm throttle bodies with variable runner control * Four-valve-per-cylinder aluminum heads with roller-finger followers reduce friction. * Mustang GT production camshafts * Includes Ford Performance colder, heat range zero spark plugs (M-12405-M50A) * Includes Ford Performance oil filter (M-6731-FL820) * Includes billet steel gerotor oil pump gears (M-6600-M50A) * Vehicle harness and PCM not included * Does not include alternator (for alternator kit: refer to part numbers M-8600-M50BALT or M-8600-M50ALTA) * Engine mount bosses and bell housing mount pattern common to 4.6L modular engines * Does not include exhaust manifolds
Not Yet Reviewed
$15,262.99
Ford Performance Parts 7.3L V8 Ford gasoline crate engine from the 2024 F250 Super Duty is loaded with great features for your build. Features: * 7.3L displacement * Bore 107.2mm x stroke 101.0mm * 430 hp at 5,500 rpm * 485 lb.-ft. of torque at 4,000 rpm * 10.5:1 compression * Cast iron block * Aluminum cylinder heads * Intake valve diameter 55.13mm * Exhaust valve diameter 42.53mm * Lift (intake/exhaust) 13.67mm/15.26mm * Cam-in-block OHV design with variable cam timing * Forged steel crankshaft * Cast aluminum pistons * Port fuel injection * Firing order: 1-5-4-8-6-3-7-2 Each engine assembly includes: * Composite intake manifold * 87mm throttle body * Left and right exhaust manifolds * 8-qt. aluminum oil pan/cooler * Ignition coils and wires * Production flexplate * Factory lift brackets * M-6038-73 shipping and storage cradle * Bellhousing bolt pattern same as 4.6/5.4 and 5.0 Coyote * Engine weight: 580 lbs.
Not Yet Reviewed
$8,749.99
Start with the right foundation for your Blue Oval build--start with Ford Performance Parts 363 c.i.d. Boss short block assemblies. Build a powerful 8.2 in. deck engine for your vintage muscle, street rod, Fox body, or late model Mustang by starting with the same short block used in the 500 hp Z363 crate engines. These Ford Performance Parts Boss short block assemblies take the bore out to 4.125 in. for 363 stroked cubes of power. Plus, strength from within is provided by the forged crankshaft and I-beam connecting rods. Power your next project with Ford Performance Parts 363 c.i.d. Boss short block assemblies. Additional technical specifications: * Engine type: 302 based small block Ford * Bore x stroke: 4.125 in. bore x 3.400 in. stroke * Block: Boss 4-bolt main block M-6010-BOSS302 * Piston to Deck Height: .01 in." below deck (nominal) * Crankshaft: SCAT forged steel * Connecting rods: SCAT forged steel I-beam connecting rods with floating pins and ARP bolts * Pistons: Mahle forged aluminum, 1.5mm, 1.5mm, 3.00mm rings, valve reliefs for X306, X307, Z304DA, Z304P, N351, and other inline valve Windsor cylinder heads * Pistons designed for 20 degree valve angle heads and will fit stock or most spread valve guide centerlines; 6cc valve pockets, check piston to valve clearance * Compatible with most aftermarket performance cylinder heads * Designed for M-6049-X306//X307/Z304DA/Z304P and N351 cylinder heads. Not designed for production 302/351W or M-6049-Y302/Y303/X302/X303/X304/X305 cylinder heads * Hydraulic roller camshaft compatible * Recommended cylinder head fasteners M-6065-BOSS head bolts or M-6014-BOSS studs depending on application * Requires head gaskets M-6051-R351 * Internally balanced; requires "0" balance flywheel and damper * High performance harmonic balancer M-6316-D302 recommended * High-volume oil pump M-6600-D2 recommended * 302 bolt pattern oil pan and timing cover * Built with all new parts * Photo and specifications may vary
( 1 )
$6,005.99
Ford Performance presents the next generation 5.0L power all-in-one complete powertrain kit! The crew at Ford Performance spec'd out these kits to simplify the swap of the newest, most innovative 5.0L Coyote engine into just about any Ford vehicle. The Coyote power module teams the Mustang GT 460 hp 5.0L Coyote V8 with a state-of-the-art 10-speed automatic transmission, along with all the electronics and hardware to finish the installation. The engine features advances like direct and port fuel injection, twin independent variable camshaft timing, along with a lightweight plasma transferred wire arc spray aluminum engine block. The Coyote power module simplifies both the shopping and build experience by kitting up the right parts that are matched to deliver potent performance with civilized drivability. The engine control pack is truly plug-and-play to simplify the conversion to a modern electronically fuel injected V8 high performance engine. Build the Coyote project of your dreams with high-quality aftermarket parts by Ford Performance!
Not Yet Reviewed
$19,555.99
The Ford Performance Parts engine team has unleased the 7.3L Megazilla crate engine! The Megazilla features the Ford Performance 7.3L intake manifold, CNC-ported cylinder heads, forged pistons and connecting rods. The Megazilla crate engine cranks out 612 hp and 670 lbs.-ft. of torque in a streetable package running on premium pump gas. Megazilla crate engine features: * 7.3L displacement * 10.5:1 compression * (M-6049-SD73P/M-6050-SD73P) CNC-ported aluminum cylinder heads * (M-9424-73LP) low-profile intake manifold * (M-9926-M5292) 92mm throttle body * Mahle forged pistons * Callies H-beam forged connecting rods * (M-6303-SD73) production steel crankshaft * (M-6250-SD73A) hi-performance 7.3L camshaft w/ VCT delete * (M-6010-SD73) production cast iron block Peak power output (J607 standard): * 612 hp @ 5,580RPM * 670 lbs.-ft. of torque @ 3,920RPM * Over 500 lbs.-ft. of torque from 2,500 rpm to 6,000 rpm Assembly includes: * Coils/plug wires/spark plugs * Production oil pan * (M-6038-73) shipping/storage cradle * Production engine wiring harness Additional information: * Bellhousing bolt pattern same as the Ford 4.6/5.4 and Coyote 5.0L * For control packs, please refer to part number: M-6017-73M and M-6017-73A (sold separately) * Custom calibration required * For starter, please refer to part number: M-11000-SD73 (sold separately) * For FEAD, please refer to part number: M-8600-SD73 and M-8600-SD73AC (sold separately) This part is designed and intended for competition use only or off-highway use only. It should not be installed on a vehicle that is driven on public roads and highways. Installation of this part on a vehicle driven on public roads and highways is likely to violate U.S. and Canadian laws and regulations relating to motor vehicle emissions.
Not Yet Reviewed
$23,397.99
Ford Performance Parts has taken their popular 302 based stroker engines and built them into these Ford Performance Parts 363 c.i.d. 500 hp Boss long block crate engines. They accomplished this by maxing out 347 stroker engine blocks with a 4.125 in. bore, giving you 363 cubic inches of Ford power! Ford engineers designed these Z363 engines to work both on the street and the strip with a strong torque curve that delivers over 390 lbs.-ft. of torque from 3,500 to the 6,500 rpm redline. Additional technical specifications: * 500 hp at 6,500 rpm * 450 ft.-lbs. at 5,300 rpm * Boss 302 block with 8.200 in. deck height * 4.125 in. bore x 3.400 in. stroke * Forged steel crankshaft * Forged steel I-beam connecting rods * 10.1:1 compression ratio * Forged pistons with floating wrist pins, * Hydraulic roller camshaft and lifters * Valve lift (in.): 0.580 intake/0.602 exhaust * Duration at .050 in. of lift: 232 intake/240 exhaust * Ford Performance Parts aluminum Z2 cylinder heads * Exhaust port raised 5/8 in.; may require custom headers * 2.05 in. intake and 1.60 in. exhaust valves * Roller rocker arms with 1.65 ratio * Ford Performance Parts cast aluminum valve covers; fit most non-EFI applications * SFI-approved harmonic balancer; may require spacer for pulley alignment * 7-quart high performance oil pan with windage tray and scraper * Available with front or rear sump oil pan and pickup * Aluminum high performance water pump * Internally balanced; use neutral balance flywheel (sold separately) * Ignition timing recommended, 32 degrees BTDC at 4,000 rpm * Maximum recommended rpm: 6,500 * Timing cover will work with most standard rotation water pumps * Fuel pump eccentric installed; allows use of mechanical fuel pump * Intake manifold not included * Includes intake gaskets and pilot bearing * Firing order 1-3-7-2-6-5-4-8 (5.0L HO and 351W firing order) * Distributor sold separately * Steel distributor gear required * Shipping weight approximately 500 lbs. * Engine power rating based on long tube headers, Edelbrock intake manifold Super Victor with 750 Holley carburetor and 1 in. spacer * Built with currently available parts; photo and specifications may vary
( 1 )
$12,973.50
Ford Performance Parts 302 c.i.d. 340 hp Boss long block crate engines feature Ford's X2 cylinder heads packaged with the legendary "E" camshaft for use with automatic or manual transmissions. Utilizing forged internals, the X2302E long blocks deliver excellent value and are solid foundations for any performance combination, including forced induction. These crate engines feature race-quality components at competitive pricing. Features and specs for these Ford Boss long block crate engines include: * 302 cu. in. * 340 hp * 9.0:1 compression ratio (nominal) * Forged pistons * Forged steel connecting rods * BOSS 4-bolt main block * Hydraulic roller camshaft, .498 in. lift intake and exhaust, duration at .050 in. is 220 degrees intake and exhaust * Double roller timing chain set * Forged steel crankshaft * Can be used in kit cars, street rods, Mustangs, Fox-bodied cars, and trucks (rear sump pan fits most Fox body cars) * Ford Performance aluminum X2 cylinder heads * Roller rocker arms * Rear sump oil pan and pickup, standard rotation timing cover, reverse rotation water pump, and non-EFI valve covers * Fuel pump eccentric installed * Built with all new parts
( 1 )
$10,230.00
Ford Performance Parts 2024 Gen 4 5.0L 480 hp Coyote engines are the latest all-aluminum crate engines from the 2024 Mustang GT. These modern 5.0L 32-valve DOHC V8s use advanced features, such as direct and port fuel injection, twin independent variable camshaft timing (Ti-VCT), high-flow cylinder heads, dual throttle bodies, and a heightened compression ratio to deliver 480 hp and 415 lb.-ft. of torque (with premium fuel). These lightweight plasma-transferred wire-arc spray aluminum cylinder blocks feature cross-bolted main bearing caps and thick main bearing bulkheads for bottom-end strength, and an optimized oil drain back and windage control to improve high-rpm performance. Available with production flexplate (automatic) or dual mass flywheel (manual) and both include engine harness. Engine specs: * 480 hp at 7,150 rpm * 415 lb.-ft. of torque at 4,900 rpm * 12.0:1 compression ratio * Bore 93mm x stroke 92.7mm * Hypereutectic aluminum pistons * Sintered steel connecting rods as used on BOSS 302 Mustang * Forged steel crankshaft * Aluminum block with plasma transferred wire arc spray weld liner coating * Longer, 12mm head bolts for higher clamp load * 9.5 qt capacity steel oil pan * Tuned composite intake manifold provides efficient air delivery and weight savings * Twin 80mm single bore drive-by-wire, electronic throttle bodies with variable runner control * High-flow aluminum cylinder heads, dual overhead camshaft (DOHC), four valves per cylinder, variable intake and exhaust camshaft timing * Engine mount bosses and bellhousing mount pattern common to 5.0L modular engines * Mustang GT 409 stainless steel tubular exhaust manifold on the RIGHT SIDE ONLY
( 1 )
$11,701.99
Ford Performance Parts Aluminator 5.2 XS long block crate engines are the most powerful, naturally aspirated, modular engines ever built by Ford. Utilizing the technology and hardware originally developed for the Shelby GT350 Mustang, the Aluminator 5.2 XS engines have a rating of 580 hp—making them worthy successors of their previous rendition, the A50XS. They're hand-assembled with premium aftermarket components, along with unique components developed specifically for the Cobra Jet racing program. Ford Performance Parts has created a balanced combination of high-end horsepower and strong mid-range torque in the ultimate cross-plane crankshaft long blocks: the Aluminator 5.2 XS engines. Summary of Aluminator XS features and specs include: * Designed to work with 2015-17 Mustang GT electronics—custom calibration required * 580 hp * 445 lbs.-ft. torque * 5.2L 317 cu. in. * 12:1 compression ratio * Hard-anodized forged pistons with low-friction coating * Unique H-beam connecting rods with bolts * Unique Ford Performance forged steel cross-plane crankshaft * Ford Performance Shelby GT350 cylinder block * Ford Performance Shelby GT350 oil pan, featuring integrated windage and slosh baffles, as well as an integrated oil pickup * Ford Performance Cobra Jet tuned intake (will not clear production 2015-17 hood without modification) * Ford Performance dual 65mm bore throttle body * Four-valve-per-cylinder Shelby GT350 fully CNC-ported aluminum heads with roller-finger camshaft followers * Unique Ford Performance camshafts * Camshaft specifications: Intake—14mm lift/270 degrees duration, exhaust—14mm lift/270 degrees duration * Low-leak rate Variable Cam Timing (VCT) phasers * Robust primary timing chains, as used on Shelby GT350R * Ford Performance 47 lb. fuel injectors * Ford Performance M-12A227-CJ13 high-rpm pulse ring * Unique Ford Performance blue coil covers with added unique badging—only on the Aluminator 5.2XS * Ford Performance zero (0) heat-range spark plugs * Ford Performance oil filter * 200 amp alternator and Front Engine Accessory Drive (FEAD) kit, as used on the Cobra Jet race car
Not Yet Reviewed
$24,500.00
The most popular crate engine size just got better and easier with Ford Performance Parts X2347 Street Cruiser dressed long block crate engines. The proven 347 stroker combination has been optimized for street cruising with a perfectly matched cam/cylinder head/intake manifold/carburetor combination that runs on pump gas. Guesswork and installation issues are eliminated with a complete intake and distributor package that has been developed and tested by Ford Performance engineers. The X2347D engines are hand-assembled and dressed out with the best aftermarket performance parts translating into 360 hp and 400 lb.-ft. of torque at the crank! Ford Performance X2347 main features: * 4.030 in. bore and 3.400 in. stroke * Boss 302 8.2 in. deck height block * SCAT forged steel crankshaft * SCAT forged steel I-beam connecting rods * Forged Mahle pistons with floating wrist pins * Ford Performance aluminum, 64 cc chamber cylinder heads * 1.94 in. intake valves, 1.54 in. exhaust valves * 9.6:1 compression ratio * Edelbrock Performer RPM Air Gap manifold * Holley Street Avenger 570 cfm carburetor * 1.6:1 ratio roller rocker arms * Ford Racing black satin aluminum valve covers * MSD billet distributor * Ford Racing 9mm black spark plug wires * Hydraulic roller Comp Cams .533 in. lift intake and exhaust with 206 degree duration intake and exhaust at .050" lift * Double roller timing chain set * Ford Racing SFI-approved harmonic damper * High performance front or rear sump 7-quart capacity oil pan with windage tray and scraper * Maximum recommended rpm: 6,000 rpm * Internal balance; use neutral balance flywheel
Not Yet Reviewed
$14,029.71
Ford Performance Parts 351 Aluminum Windsor engine blocks feature cast iron sleeves and are available in 9.2 in. or 9.5 in. deck heights. The 9.2 in. version of Ford's Z351 aluminum Windsor blocks is great for smaller displacement builds without the penalty of a taller deck. Both versions are cast from high strength 356-T6 grade aluminum and use splayed, 4-bolt, steel main caps on number 2-3-4 main bearings. The blocks are user friendly and designed to use conventional Windsor components like cams, timing chains, timing chain covers, oil pans, and oil pumps. With a weight of as little as 106 lbs., they can be nearly 90 lbs. lighter than an iron Ford Performance Parts BOSS 351 block. Additional features include: * 2-bolt main caps on number 1 and 5 main bearings * ARP studs on all inner main caps * ARP bolts on number 2-3-4 splayed outer positions * 4.110-4.115 in. bore as delivered--finish at 4.125 in. * 2.75 in. crankshaft main journal diameter (351C) * 2.9415-2.9425 in. diameter finished main bearing bore * Lifter bores finished 0.8753-0.8768 in. * 2.2032-2.2052 in. diameter cam bearing bores * Use cam bearing PN M-6261-J351 or M-6261-R351 * Wet sump oiling system * Maximum stroke 9.2 in. deck height: 4.000 in. * Maximum stroke 9.5 in. deck height: 4.250 in. * Weight 9.2 in. deck height: 106 lbs. * Weight 9.5 in. deck height: 118 lbs.
( 2 )
$6,509.99
Ford Performance Parts 427 c.i.d. Boss short block assemblies provide you with the perfect foundation for building your high-horsepower Boss engine. They start out with an iron 4-bolt main Boss block with a 9.500 in. deck height, then add a 4.000 in. stroke steel crankshaft and a set of forged steel H-beam connecting rods with floating pins, and top that off with a set of 4.125 in. bore forged pistons. Ford Performance Parts 427 c.i.d. Boss short block assemblies require Boss cylinder head bolts or studs and Ford Performance Parts or aftermarket cylinder heads. Additional technical information: * Engine type: 351 based small block Ford * Iron 4-bolt main block with 9.5 in. deck height (M-6010-Z351) * .005 in. below piston to deck height (nominal) * SCAT forged steel 4.000 in. stroke crankshaft * SCAT forged steel H beam connecting rods with floating pins and ARP bolts * Mahle 4.125 in. forged pistons, with reliefs for Z304D, Z304P, N351, and other inline valve Windsor cylinder heads * 17 cc piston dish; check piston to valve clearance * Hydraulic roller camshaft compatible; requires aftermarket tie bar hydraulic lifters * 0.060-inch oil galley restrictors included for solid roller cam applications * Internally balanced * Uses standard Windsor timing cover (M-6059-D351) * Standard Windsor oil pan flange * Recommended cylinder head fasteners M-6065-BOSS head bolts or M-6014-BOSS studs depending on application * Compatible with most aftermarket performance cylinder heads; designed for 20 degree valve angle heads and will fit stock or spread valve guide centerlines * Not designed for production 302/351W or M-6049-Y302/Y303/X302/X303/X304/X305 cylinder heads * Requires M-6051-R351 head gaskets * High-performance harmonic balancer M-6316-D302 recommended * Built with all new parts * Hand assembled in the USA with performance clearances * Photo and specifications may vary
Not Yet Reviewed
$5,333.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
